Set-DhcpServerv4Failover

Modifies the properties of an existing failover relationship.

Syntax

Set-DhcpServerv4Failover
   [-ComputerName <String>]
   [-Name] <String>
   [-AutoStateTransition <Boolean>]
   [-MaxClientLeadTime <TimeSpan>]
   [-SharedSecret <String>]
   [-StateSwitchInterval <TimeSpan>]
   [-PartnerDown]
   [-Force]
   [-LoadBalancePercent <UInt32>]
   [-ReservePercent <UInt32>]
   [-PassThru]
   [-Mode <String>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Set-DhcpServerv4Failover cmdlet modifies the properties of an existing failover relationship.

If the failover mode of relation is load balance or is being changed to load balance , then the LoadBalancePercent, MaxClientLeadTime, StateSwitchInterval, AutoStateTransition, and SharedSecret parameters can be specified.

If the failover mode of relation is hot standby or is being changed to hot standby, then the ReservePercent, MaxClientLeadTime, StateSwitchInterval, AutoStateTransition, and SharedSecret parameters can be specified.

If the SharedSecret parameter value is Null, then enableauth will be set to False in the data structure. If the SharedSecret parameter is not Null, then enableauth will be set to True in the data structure.

If the SharedSecret parameter is specified, then confirmation will be sought from the user to transport the shared secret in the clear text on the network.

If you specify the Mode parameter to change the mode of the failover relationship, default confirmation will be sought.

Examples

EXAMPLE 1

PS C:\>Set-DhcpServerv4Failover -ComputerName dhcpserver.contoso.com -Name SFO-SIN-Failover -LoadBalancePercent 70 -MaxClientLeadTime 2:00:00 -AutoStateTransition True -StateSwitchInterval 2:00:00

This example modifies the parameters of the load balance failover relationship named SFO-SIN-Failover on the computer named dhcpserver.contoso.com as follows: 70% of the client requests will be served by the DHCP server service running on the computer named dhcpserver.contoso.com and 30% of the client requests will be served by the DHCP server service running on the computer named dhcpserver2.contoso.com. The maximum client lead time for the failover relationship is set to 2 hours. The automatic state transition from the COMMUNICATION INTERRUPTED state to the PARTNER DOWN state is enabled and the timer for automatic state transition is set to 2 hours.

EXAMPLE 2

PS C:\>Set-DhcpServerv4Failover -ComputerName dhcpserver.contoso.com -Name SFO-SIN-Failover -ReservePercent 10 -MaxClientLeadTime 2:00:00 -AutoStateTransition True -StateSwitchInterval 2:00:00

This example modifies the parameters of the hot standby failover relationship named SFO-SIN-Failover on computer named dhcpserver.contoso.com as follows: 10% of the free IP addresses in the scopes will be reserved for the standby DHCP server service. The maximum client lead time for the failover relationship is set to 2 hours. The automatic state transition from the COMMUNICATION INTERRUPTED state to the PARTNER DOWN state is enabled and the timer for automatic state transition is set to 2 hours.

EXAMPLE 3

PS C:\>Set-DhcpServerv4Failover -Name SFO-SIN-Failover -ComputerName dhcpserver.contoso.com -Mode LoadBalance -LoadBalancePercent 60

This example changes the mode of the failover relationship SFO-SIN-Failover to LoadBalance. The computer named dhcpserver.contoso.com serves 60 percent of the clients.

Parameters

-AsJob

ps_cimcommon_asjob

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-AutoStateTransition

Specifies the enabled state for automatic state transition from the COMMUNICATION INTERRUPTED state to the PARTNER DOWN state based on expiration of the timer, using the StateSwitchInterval parameter, while in the COMMUNICATION INTERRUPTED state. The acceptable values for this parameter are: True or False. The default value is False. Note: This parameter value is set to True, if the StateSwitchInterval parameter is specified.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ComputerName

Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the Dynamic Host Configuration Protocol (DHCP) server service.

Type:String
Aliases:Cn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Force

Specifies, if the SharedSecret parameter is specified, that user confirmation is required since the SharedSecret parameter value may be transferred in plain text transport in the case of remote management. Specifying this parameter turns off the user confirmation.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-LoadBalancePercent

Specifies the percentage of DHCP client requests which should be served by the local DHCP server service or the DHCP server service running on the computer specified in the ComputerName parameter. The remaining DHCP client requests would be served by the partner DHCP server service.

Type:UInt32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-MaxClientLeadTime

Specifies the maximum client lead time for the failover relationship.

Type:TimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Mode

Specifies a mode for the failover relationship. The acceptable values for this parameter are:

  • HotStandby. Changes the mode to hot standby.
  • LoadBalance. Changes the mode to load balance.
Type:String
Accepted values:LoadBalance, HotStandby
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Name

Specifies the name of failover relationship for which the properties are modified.

Type:String
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-PartnerDown

Changes the state of the DHCP server service from COMMUNICATION INTERRUPTED to PARTNER DOWN.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ReservePercent

Specifies the percentage of the free IPv4 address pool for the scope which should be reserved on the standby DHCP server service.

In the case of a failover, the IPv4 addresses from this reserved pool on the standby DHCP server service will be leased to new DHCP clients.

Type:UInt32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-SharedSecret

Specifies the shared secret to be used for message authentication. To turn off message authentication, set this parameter value to Null.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-StateSwitchInterval

Specifies the time interval for which the DHCP server service should continue to operate in the COMMUNICATION INTERRUPTED state before transitioning to the PARTNER DOWN state.

Type:TimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Outputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.