Set-NetTeredoConfiguration
Modifies the Teredo configuration of a computer or a Group Policy object (GPO).
Syntax
Set-NetTeredoConfiguration
[[-Type] <Type>]
[[-ServerName] <String>]
[[-RefreshIntervalSeconds] <UInt32>]
[[-ClientPort] <UInt32>]
[[-ServerVirtualIP] <String>]
[[-DefaultQualified] <Boolean>]
[[-ServerShunt] <Boolean>]
[-AsJob]
[-CimSession <CimSession[]>]
[-GPOSession <String>]
[-IPInterface <CimInstance>]
[-PassThru]
[-PolicyStore <String>]
[-ThrottleLimit <Int32>]
[-Confirm]
[-WhatIf] Set-NetTeredoConfiguration
[[-Type] <Type>]
[[-ServerName] <String>]
[[-RefreshIntervalSeconds] <UInt32>]
[[-ClientPort] <UInt32>]
[[-ServerVirtualIP] <String>]
[[-DefaultQualified] <Boolean>]
[[-ServerShunt] <Boolean>]
[-AsJob]
[-CimSession <CimSession[]>]
[-PassThru]
[-ThrottleLimit <Int32>]
-InputObject <CimInstance[]>
[-Confirm]
[-WhatIf] Description
The Set-NetTeredoConfiguration cmdlet modifies the Teredo configuration of either a computer or a Group Policy Object (GPO).
Examples
Example 1: Set the Teredo server name
PS C:\>Set-NetTeredoConfiguration -ServerName "Test"This command sets the Teredo server name to Test on the local persistent store.
Example 2: Set the Teredo state
PS C:\>Set-NetTeredoConfiguration -Type enterpriseclient -PolicyStore "Domain\GPOname"This command sets the Teredo state to enterpriseclient in a GPO named Domain\GPOname.
Parameters
-AsJob
ps_cimcommon_asjob
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClientPort
Specifies the UDP port of the client computer. If this parameter is not specified, then the port is chosen by the operating system.
| Type: | UInt32 |
| Position: | 5 |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DefaultQualified
Determines if this cmdlet qualifies Teredo by default. The default value is False. This parameter can only be specified on GPOs.
| Type: | Boolean |
| Position: | 7 |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-GPOSession
Specifies the Group Policy session to which to store the configuration information.
You can use this parameter with the NetGPO cmdlets to aggregate multiple operations performed on a GPO.
You cannot use this parameter with the PolicyStore parameter.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
Specifies the object which contains the Teredo configuration information to modify.
| Type: | CimInstance[] |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPInterface
Specifies the interface on which to set the Teredo configuration. If the specified interface is not a Teredo interface, then the cmdlet does not return any configuration.
| Type: | CimInstance |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PolicyStore
Specifies the policy store that contains the configuration to set. The acceptable values for this parameter are:
-- PersistentStore
-- GPO
The default value is PersistentStore.
To set the configuration of a GPO, specify the GPO name using the following format: Domain\GPOName
You cannot use this parameter with the GPOSession parameter.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RefreshIntervalSeconds
Specifies the client refresh interval in seconds.
| Type: | UInt32 |
| Aliases: | RefreshInterval |
| Position: | 4 |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ServerName
Specifies the name or IPv4 address of the Teredo server.
| Type: | String |
| Position: | 3 |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ServerShunt
Indicates that the tunnel miniport and IPv4 routing layer are bypassed for high throughput on the Teredo relay functionality of the Teredo server.
| Type: | Boolean |
| Position: | 8 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ServerVirtualIP
Specifies the virtual IPv4 address of the server. This parameter is not applicable if the computer is a Teredo client. This parameter can only be specified on GPOs.
| Type: | String |
| Position: | 6 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Type
Specifies the state of Teredo. The acceptable values for this parameter are:
-- Disabled: Disables the Teredo service.
-- Client: Enables the Teredo client.
-- Enterpriseclient: Skips the managed network detection.
-- Server: Enables the Teredo server.
-- Default: The default state is client.
| Type: | Type |
| Position: | 2 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
None
This cmdlet accepts no input objects.
Outputs
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
When the Passthru parameter is specified, this cmdlet outputs a modified Teredo configuration object.
Related Links
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for