affinity mask Server Configuration Option
Applies To: SQL Server 2016
To carry out multitasking, Microsoft Windows 2000 and Windows Server 2003 sometimes move process threads among different processors. Although efficient from an operating system point of view, this activity can reduce SQL Server performance under heavy system loads, as each processor cache is repeatedly reloaded with data. Assigning processors to specific threads can improve performance under these conditions by eliminating processor reloads and reducing thread migration across processors (thereby reducing context switching); such an association between a thread and a processor is called processor affinity.
SQL Server supports processor affinity by means of two affinity mask options: affinity mask (also known as CPU affinity mask) and affinity I/O mask. For more information on the affinity I/O maskoption, see affinity Input-Output mask Server Configuration Option. CPU and I/O affinity support for servers with 33 to 64 processors requires the additional use of the affinity64 mask Server Configuration Option and affinity64 Input-Output mask Server Configuration Option, respectively.
The affinity mask option, which existed in earlier releases of SQL Server, dynamically controls CPU affinity.
In SQL Server, the affinity mask option can be configured without requiring a restart of the instance of SQL Server. When you are using sp_configure, you must run either RECONFIGURE or RECONFIGURE WITH OVERRIDE after setting a configuration option. When you are using SQL Server Express, changing the affinity mask option does require a restart.
Changes to the affinity masks occur dynamically, allowing for on-demand startup and shutdown of the CPU schedulers that bind process threads within SQL Server. This can occur as conditions change on the server. For example, if a new instance of SQL Server is added to the server, it may be necessary to make adjustments to the affinity mask option to redistribute processor load.
Modifications to the affinity bitmasks require SQL Server to enable a new CPU scheduler and disable the existing CPU scheduler. New batches can then be processed on the new or remaining schedulers.
To start a new CPU scheduler, SQL Server creates a new scheduler and adds it to the list of its standard schedulers. The new scheduler is considered only for the new incoming batches. Current batches continue to run on the same scheduler. The workers migrate to the new scheduler as they free up, or as new workers are created.
Shutting down a scheduler requires all batches on the scheduler to complete their activities and exit. A scheduler that has been shut down is marked as offline so that no new batch is scheduled on it.
Whether a new scheduler is added or removed, the permanent system tasks such as lockmonitor, checkpoint, system task thread (processing DTC), and signal process continue to run on the scheduler while the server is operational. These permanent system tasks do not dynamically migrate. To redistribute processor load for these system tasks across schedulers, it is necessary to restart the SQL Server instance. If SQL Server attempts to shut down a scheduler associated with a permanent system task, the task continues to run on the offline scheduler (no migration). This scheduler is bound to the processors in the modified affinity mask and should not put any load on the processor it was affinitized with before the change. Having extra offline schedulers, should not significantly affect the load of the system. If this is not the case, a database server reboot is required to reconfigure these tasks.
The I/O affinity tasks (such as lazywriter and logwriter) are directly affected by the I/O affinity mask. If the lazywriter and logwriter tasks are not affinitized, they follow the same rules defined for the other permanent tasks such as lockmonitor or checkpoint.
To ensure that the new affinity mask is valid, the RECONFIGURE command verifies that the normal CPU and I/O affinities are mutually exclusive. If this is not the case, an error message is reported to the client session and to the SQL Server error log, indicating that such a setting is not recommended. Running RECONFIGURE WITH OVERRIDE options allows CPU and I/O affinities that are not mutually exclusive.
If you specify an affinity mask that attempts to map to a nonexistent CPU, the RECONFIGURE command reports an error message to both the client session and the SQL Server error log. Using the RECONFIGURE WITH OVERRIDE option has no effect in this case, and the same configuration error is reported again.
You can also exclude SQL Server activity from processors assigned specific workload assignments by the Windows 2000 or Windows Server 2003 operating system. If you set a bit representing a processor to 1, that processor is selected by the SQL Server Database Engine for thread assignment. When you set affinity mask to 0 (the default), the Microsoft Windows 2000 or Windows Server 2003 scheduling algorithms set the thread's affinity. When you set affinity mask to any nonzero value, SQL Server affinity interprets the value as a bitmask that specifies those processors eligible for selection.
By segregating SQL Server threads from running on particular processors, Microsoft Windows 2000 or Windows Server 2003 can better evaluate the system's handling of processes specific to Windows. For example, on an 8-CPU server running two instances of SQL Server (instance A and B), the system administrator could use the affinity mask option to assign the first set of 4 CPUs to instance A and the second set of 4 to instance B. To configure more than 32 processors, set both the affinity mask and the affinity64 mask. The values for affinity mask are as follows:
A one-byte affinity mask covers up to 8 CPUs in a multiprocessor computer.
A two-byte affinity mask covers up to 16 CPUs in a multiprocessor computer.
A three-byte affinity mask covers up to 24 CPUs in a multiprocessor computer.
A four-byte affinity mask covers up to 32 CPUs in a multiprocessor computer.
To cover more than 32 CPUs, configure a four-byte affinity mask for the first 32 CPUs and up to a four-byte affinity64 mask for the remaining CPUs.
Because setting SQL Server processor affinity is a specialized operation, it is recommended that it be used only when necessary. In most cases, the Microsoft Windows 2000 or Windows Server 2003 default affinity provides the best performance. You should also consider the CPU requirements for other applications when setting the affinity masks. For more information, see your Windows operating system documentation.
When specifying the affinity I/O mask option, you must use it in connection with the affinity mask configuration option. Do not enable the same CPU in both the affinity mask switch and the affinity I/O mask option. The bits corresponding to each CPU should be in one of these three states:
0 in both the affinity mask option and the affinity I/O mask option.
1 in the affinity mask option and 0 in the affinity I/O mask option.
0 in the affinity mask option and 1 in the affinity I/O mask option.
As an example of setting the affinity mask option, if processors 1, 2, and 5 are selected as available with bits 1, 2, and 5 set to 1 and bits 0, 3, 4, 6, and 7 set to 0, a hexadecimal value of 0x26 or the decimal equivalent of
38 is specified. Number the bits from right to left. The affinity mask option starts counting processors from 0 to 31, so that in the following example the counter
1 represents the second processor on the server.
sp_configure 'show advanced options', 1; RECONFIGURE; GO sp_configure 'affinity mask', 38; RECONFIGURE; GO
These are affinity mask values for an 8-CPU system.
|Decimal value||Binary bit mask||Allow SQL Server threads on processors|
|3||00000011||0 and 1|
|7||00000111||0, 1, and 2|
|15||00001111||0, 1, 2, and 3|
|31||00011111||0, 1, 2, 3, and 4|
|63||00111111||0, 1, 2, 3, 4, and 5|
|127||01111111||0, 1, 2, 3, 4, 5, and 6|
|255||11111111||0, 1, 2, 3, 4, 5, 6, and 7|
The affinity mask option is an advanced option. If you are using the sp_configure system stored procedure to change the setting, you can change affinity mask only when show advanced options is set to 1. After executing the Transact-SQL RECONFIGURE command, the new setting takes effect immediately without requiring a restart of the SQL Server instance.
When using hardware based non-uniform memory access (NUMA) and the affinity mask is set, every scheduler in a node will be affinitized to its own CPU. When the affinity mask is not set, each scheduler is affinitized to the group of CPUs within the NUMA node and a scheduler mapped to NUMA node N1 can schedule work on any CPU in the node, but not on CPUs associated with another node.
Any operation running on a single NUMA node can only use buffer pages from that node. When an operation is run in parallel on CPUs from multiple nodes, memory can be used from any node involved.
Dynamic affinity is tightly constrained by CPU licensing. SQL Server does not allow any configuration of affinity mask options that violates the licensing policy.
If a specified affinity mask violates the licensing policy during SQL Server startup or during database attach, the engine layer will complete the startup process or database attach/restore operation, and then it will reset the sp_configure run value for the affinity mask to zero, issuing an error message to the SQL Server error log.
If a specified affinity mask violates the licensing policy when running Transact-SQL RECONFIGURE command, an error message is reported to the client session and to the SQL Server error log, requiring the database administrator to reconfigure the affinity mask. No RECONFIGURE WITH OVERRIDE command is accepted in this case.