Security Bulletin

Microsoft Security Bulletin MS13-046 - Important

Vulnerabilities in Kernel-Mode Drivers Could Allow Elevation Of Privilege (2840221)

Published: May 14, 2013 | Updated: December 16, 2013

Version: 1.1

General Information

Executive Summary

This security update resolves three privately reported vulnerabilities in Microsoft Windows. The vulnerabilities could allow elevation of privilege if an attacker logs on to the system and runs a specially crafted application. An attacker must have valid logon credentials and be able to log on locally to exploit these vulnerabilities.

This security update is rated Important for all supported editions of Windows XP, Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, Windows Server 2012, and Windows RT. For more information, see the subsection, Affected and Non-Affected Software, in this section.

The security update addresses the vulnerabilities by correcting the way that Windows handles objects in memory. For more information about the vulnerabilities, see the Frequently Asked Questions (FAQ) subsection for the specific vulnerability entry under the next section, Vulnerability Information.

Recommendation. Most customers have automatic updating enabled and will not need to take any action because this security update will be downloaded and installed automatically. Customers who have not enabled automatic updating need to check for updates and install this update manually. For information about specific configuration options in automatic updating, see Microsoft Knowledge Base Article 294871.

For administrators and enterprise installations, or end users who want to install this security update manually, Microsoft recommends that customers apply the update at the earliest opportunity using update management software, or by checking for updates using the Microsoft Update service.

See also the section, Detection and Deployment Tools and Guidance, later in this bulletin.

Knowledge Base Article

Knowledge Base Article 2840221
File information Yes
SHA1/SHA2 hashes Yes
Known issues Yes

Affected and Non-Affected Software

The following software have been tested to determine which versions or editions are affected. Other versions or editions are either past their support life cycle or are not affected. To determine the support life cycle for your software version or edition, see Microsoft Support Lifecycle.

Affected Software 

Operating System Maximum Security Impact Aggregate Severity Rating Updates Replaced
Windows XP
Windows XP Service Pack 3 (2829361) Elevation of Privilege Important 2808735 in MS13-036
Windows XP Professional x64 Edition Service Pack 2 (2829361) Elevation of Privilege Important 2808735 in MS13-036
Windows Server 2003
Windows Server 2003 Service Pack 2 (2829361) None No severity rating[1] 2808735 in MS13-036
Windows Server 2003 x64 Edition Service Pack 2 (2829361) None No severity rating[1] 2808735 in MS13-036
Windows Server 2003 with SP2 for Itanium-based Systems (2829361) None No severity rating[1] 2808735 in MS13-036
Windows Vista
Windows Vista Service Pack 2 (2830290) Elevation of Privilege Important None
Windows Vista Service Pack 2 (2829361) None No severity rating[1] 2808735 in MS13-036
Windows Vista x64 Edition Service Pack 2 (2830290) Elevation of Privilege Important None
Windows Vista x64 Edition Service Pack 2 (2829361) None No severity rating[1] 2808735 in MS13-036
Windows Server 2008
Windows Server 2008 for 32-bit Systems Service Pack 2 (2830290) Elevation of Privilege Important None
Windows Server 2008 for 32-bit Systems Service Pack 2 (2829361) None No severity rating[1] 2808735 in MS13-036
Windows Server 2008 for x64-based Systems Service Pack 2 (2830290) Elevation of Privilege Important None
Windows Server 2008 for x64-based Systems Service Pack 2 (2829361) None No severity rating[1] 2808735 in MS13-036
Windows Server 2008 for Itanium-based Systems Service Pack 2 (2830290) Elevation of Privilege Important None
Windows Server 2008 for Itanium-based Systems Service Pack 2 (2829361) None No severity rating[1] 2808735 in MS13-036
Windows 7
Windows 7 for 32-bit Systems Service Pack 1 (2830290) Elevation of Privilege Important None
Windows 7 for 32-bit Systems Service Pack 1 (2829361) Elevation of Privilege Important 2808735 in MS13-036
Windows 7 for x64-based Systems Service Pack 1 (2830290) Elevation of Privilege Important None
Windows 7 for x64-based Systems Service Pack 1 (2829361) Elevation of Privilege Important 2808735 in MS13-036
Windows 2008 R2
Windows Server 2008 R2 for x64-based Systems Service Pack 1 (2830290) Elevation of Privilege Important None
Windows Server 2008 R2 for x64-based Systems Service Pack 1 (2829361) None No severity rating[1] 2808735 in MS13-036
Windows Server 2008 R2 for Itanium-based Systems Service Pack 1 (2830290) Elevation of Privilege Important None
Windows Server 2008 R2 for Itanium-based Systems Service Pack 1 (2829361) None No severity rating[1] 2808735 in MS13-036
Windows 8
Windows 8 for 32-bit Systems (2830290) Elevation of Privilege Important None
Windows 8 for 32-bit Systems (2829361) None No severity rating[1] 2813170 in MS13-031
Windows 8 for 64-bit Systems (2830290) Elevation of Privilege Important None
Windows 8 for 64-bit Systems (2829361) None No severity rating[1] 2813170 in MS13-031
Windows Server 2012
Windows Server 2012 (2830290) Elevation of Privilege Important None
Windows Server 2012 (2829361) None No severity rating[1] 2813170 in MS13-031
Windows RT
Windows RT[2](2830290) Elevation of Privilege Important None
Windows RT[2](2829361) None No severity rating[1] 2813170 in MS13-031
Server Core Installation Option
Windows Server 2008 for 32-bit Systems Service Pack 2 (Server Core installation) (2830290) Elevation of Privilege Important None
Windows Server 2008 for 32-bit Systems Service Pack 2 (Server Core installation) (2829361) None No severity rating[1] 2808735 in MS13-036
Windows Server 2008 for x64-based Systems Service Pack 2 (Server Core installation) (2830290) Elevation of Privilege Important None
Windows Server 2008 for x64-based Systems Service Pack 2 (Server Core installation) (2829361) None No severity rating[1] 2808735 in MS13-036
Windows Server 2008 R2 for x64-based Systems Service Pack 1 (Server Core installation) (2830290) Elevation of Privilege Important None
Windows Server 2008 R2 for x64-based Systems Service Pack 1 (Server Core installation) (2829361) None No severity rating[1] 2808735 in MS13-036
Windows Server 2012 (Server Core installation) (2830290) Elevation of Privilege Important None
Windows Server 2012 (Server Core installation) (2829361) None No severity rating[1] 2813170 in MS13-031

[1 ]Severity ratings do not apply to this update for the specified software because the known attack vectors for the vulnerability discussed in this bulletin are blocked in a default configuration. However, as a defense-in-depth measure, Microsoft recommends that customers of this software apply this security update.

[2 ]This update is available via Windows Update.

** **

Update FAQ

For some of the affected software, there are two updates available. Do I need to install both updates?
Yes. Customers should apply all updates offered for the software installed on their systems.

Do I need to install these security updates in a particular sequence?
No. Multiple updates for one version of Microsoft Windows or Microsoft Windows Server software can be applied in any sequence.

Does this update contain any security-related changes to functionality?
Yes. In addition to the changes that are listed in the Vulnerability Information section of this bulletin, this update includes defense-in-depth updates to help improve security-related features in Microsoft Windows.

What is defense-in-depth?
In information security, defense-in-depth refers to an approach in which multiple layers of defense are in place to help prevent attackers from compromising the security of a network or system.

I am using an older release of the software discussed in this security bulletin. What should I do?
The affected software listed in this bulletin have been tested to determine which releases are affected. Other releases are past their support life cycle. For more information about the product lifecycle, see the Microsoft Support Lifecycle website.

It should be a priority for customers who have older releases of the software to migrate to supported releases to prevent potential exposure to vulnerabilities. To determine the support lifecycle for your software release, see Select a Product for Lifecycle Information. For more information about service packs for these software releases, see Service Pack Lifecycle Support Policy.

Customers who require custom support for older software must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, see the Microsoft Worldwide Information website, select the country in the Contact Information list, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Microsoft Support Lifecycle Policy FAQ.

Vulnerability Information

Severity Ratings and Vulnerability Identifiers

The following severity ratings assume the potential maximum impact of the vulnerability. For information regarding the likelihood, within 30 days of this security bulletin's release, of the exploitability of the vulnerability in relation to its severity rating and security impact, please see the Exploitability Index in the May bulletin summary. For more information, see Microsoft Exploitability Index.

Affected Software DirectX Graphics Kernel Subsystem Double Fetch Vulnerability - CVE-2013-1332 Win32k Buffer Overflow Vulnerability - CVE-2013-1333 Win32k Window Handle Vulnerability - CVE-2013-1334 Aggregate Severity Rating
Windows XP
Windows XP Service Pack 3 (Win32k.sys) (2829361) Not applicable Not applicable Important  Elevation of Privilege Important 
Windows XP Professional x64 Edition Service Pack 2 (Win32k.sys) (2829361) Not applicable Not applicable Important  Elevation of Privilege Important 
Windows Server 2003
Windows Server 2003 Service Pack 2 (Win32k.sys) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Windows Server 2003 x64 Edition Service Pack 2 (Win32k.sys) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Windows Server 2003 with SP2 for Itanium-based Systems (Win32k.sys) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Windows Vista
Windows Vista Service Pack 2 (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows Vista Service Pack 2 (Win32k.sys) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Windows Vista x64 Edition Service Pack 2 (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows Vista x64 Edition Service Pack 2 (Win32k.sys) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Windows Server 2008
Windows Server 2008 for 32-bit Systems Service Pack 2 (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows Server 2008 for 32-bit Systems Service Pack 2 (Win32k.sys) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Windows Server 2008 for x64-based Systems Service Pack 2 (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows Server 2008 for x64-based Systems Service Pack 2 (Win32k.sys) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Windows Server 2008 for Itanium-based Systems Service Pack 2 (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows Server 2008 for Itanium-based Systems Service Pack 2 (Win32k.sys) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Windows 7
Windows 7 for 32-bit Systems Service Pack 1 (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows 7 for 32-bit Systems Service Pack (Win32k.sys) (2829361) Not applicable Important  Elevation of Privilege No severity rating[1] Important 
Windows 7 for x64-based Systems Service Pack 1 (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows 7 for x64-based Systems Service Pack 1 (Win32k.sys) (2829361) Not applicable Important  Elevation of Privilege No severity rating[1] Important 
Windows Server 2008 R2
Windows Server 2008 R2 for x64-based Systems Service Pack 1 (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows Server 2008 R2 for x64-based Systems Service Pack 1 (Win32k.sys) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Windows Server 2008 R2 for Itanium-based Systems Service Pack 1 (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows Server 2008 R2 for Itanium-based Systems Service Pack 1 (Win32k.sys) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Windows 8
Windows 8 for 32-bit Systems (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows 8 for 32-bit Systems (ntoskrnl.exe) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Windows 8 for 64-bit Systems (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows 8 for 64-bit Systems (ntoskrnl.exe) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Windows Server 2012
Windows Server 2012 (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows Server 2012 (ntoskrnl.exe) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Windows RT
Windows RT (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows RT (ntoskrnl.exe) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Server Core installation option
Windows Server 2008 for 32-bit Systems Service Pack 2 (Server Core installation) (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows Server 2008 for 32-bit Systems Service Pack 2 (Server Core installation) (Win32k.sys) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Windows Server 2008 for x64-based Systems Service Pack 2 (Server Core installation) (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows Server 2008 for x64-based Systems Service Pack 2 (Server Core installation) (Win32k.sys) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Windows Server 2008 R2 for x64-based Systems Service Pack 1 (Server Core installation) (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows Server 2008 R2 for x64-based Systems Service Pack 1 (Server Core installation) (Win32k.sys) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]
Windows Server 2012 (Server Core installation) (dxgkrnl.sys) (2830290) Important  Elevation of Privilege Not applicable Not applicable Important 
Windows Server 2012 (Server Core installation) (ntoskrnl.exe) (2829361) Not applicable Not applicable No severity rating[1] No severity rating[1]

[1 ]Severity ratings do not apply to this update for the specified software because the known attack vectors for the vulnerability discussed in this bulletin are blocked in a default configuration. However, as a defense-in-depth measure, Microsoft recommends that customers of this software apply this security update.

DirectX Graphics Kernel Subsystem Double Fetch Vulnerability - CVE-2013-1332

An elevation of privilege vulnerability exists when the Microsoft DirectX graphics kernel subsystem (dxgkrnl.sys) improperly handles objects in memory.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2013-1332.

Mitigating Factors

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • An attacker must have valid logon credentials and be able to log on locally to exploit this vulnerability.

Workarounds

Microsoft has not identified any workarounds for this vulnerability.

FAQ

What is the scope of the vulnerability?
This is an elevation of privilege vulnerability.

What causes the vulnerability?
The vulnerability is caused when the DirectX kernel-mode driver improperly handles objects in memory.

What is the DirectX graphics kernel subsystem driver (dxgkrnl.sys)?
Dxgkrnl.sys is the Microsoft Direct X graphic kernel subsystem. It is a kernel-mode driver called by the display miniport driver to pass a DXGKRNL_INTERFACE structure to the display miniport driver's DxgkDdiStartDevice function.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could gain elevated privileges and read arbitrary amounts of kernel memory.

How could an attacker exploit the vulnerability?
To exploit this vulnerability, an attacker would first have to log on to the system. An attacker could then run a specially crafted application designed to increase privileges.

What systems are primarily at risk from the vulnerability?
Workstations and terminal servers are primarily at risk. Servers could be at more risk if administrators allow users to log on to servers and to run programs. However, best practices strongly discourage allowing this.

What does the update do?
The update addresses the vulnerability by correcting the way that Windows handles objects in memory.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through coordinated vulnerability disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.

Win32k Buffer Overflow Vulnerability - CVE-2013-1333

An elevation of privilege vulnerability exists when the Windows kernel-mode driver improperly handles objects in memory. An attacker who successfully exploited this vulnerability could cause system instability.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2013-1333.

Mitigating Factors

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • An attacker must have valid logon credentials and be able to log on locally to exploit this vulnerability.

Workarounds

Microsoft has not identified any workarounds for this vulnerability.

FAQ

What is the scope of the vulnerability?
This is an elevation of privilege vulnerability.

What causes the vulnerability?
The vulnerability is caused when the Windows kernel-mode driver improperly handles objects in memory.

What is the Windows kernel-mode driver (win32k.sys)?
Win32k.sys is a kernel-mode device driver and is the kernel part of the Windows subsystem. It contains the window manager, which controls window displays; manages screen output; collects input from the keyboard, mouse, and other devices; and passes user messages to applications. It also contains the Graphics Device Interface (GDI), which is a library of functions for graphics output devices. Finally, it serves as a wrapper for DirectX support that is implemented in another driver (dxgkrnl.sys).

What is the Windows kernel?
The Windows kernel is the core of the operating system. It provides system-level services such as device management and memory management, allocates processor time to processes, and manages error handling.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could gain elevated privileges and cause system instability.

How could an attacker exploit the vulnerability?
To exploit this vulnerability, an attacker would first have to log on to the system. An attacker could then run a specially crafted application designed to increase privileges.

What systems are primarily at risk from the vulnerability?
Workstations are primarily at risk.

What does the update do?
The update addresses the vulnerability by correcting the way that Windows handles objects in memory.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through coordinated vulnerability disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.

Win32k Window Handle Vulnerability - CVE-2013-1334

An elevation of privilege vulnerability exists when the Windows kernel-mode driver improperly handles objects in memory. An attacker who successfully exploited this vulnerability could execute arbitrary code with elevated privileges.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2013-1334.

Mitigating Factors

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • An attacker must have valid logon credentials and be able to log on locally to exploit this vulnerability.

Workarounds

Microsoft has not identified any workarounds for this vulnerability.

FAQ

What is the scope of the vulnerability?
This is an elevation of privilege vulnerability.

What causes the vulnerability?
The vulnerability is caused when the Windows kernel-mode driver improperly handles objects in memory.

What is the Windows kernel-mode driver (win32k.sys)?
Win32k.sys is a kernel-mode device driver and is the kernel part of the Windows subsystem. It contains the window manager, which controls window displays; manages screen output; collects input from the keyboard, mouse, and other devices; and passes user messages to applications. It also contains the Graphics Device Interface (GDI), which is a library of functions for graphics output devices. Finally, it serves as a wrapper for DirectX support that is implemented in another driver (dxgkrnl.sys).

What is the Windows kernel?
The Windows kernel is the core of the operating system. It provides system-level services such as device management and memory management, allocates processor time to processes, and manages error handling.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could run processes in an elevated context.

How could an attacker exploit the vulnerability?
To exploit this vulnerability, an attacker would first have to log on to the system. An attacker could then run a specially crafted application designed to increase privileges.

What systems are primarily at risk from the vulnerability?
Workstations are primarily at risk.

What does the update do?
The update addresses the vulnerability by correcting the way that Windows handles objects in memory.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through coordinated vulnerability disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.

Update Information

Detection and Deployment Tools and Guidance

Several resources are available to help administrators deploy security updates. 

  • Microsoft Baseline Security Analyzer (MBSA) lets administrators scan local and remote systems for missing security updates and common security misconfigurations. 
  • Windows Server Update Services (WSUS), Systems Management Server (SMS), and System Center Configuration Manager (SCCM) help administrators distribute security updates. 
  • The Update Compatibility Evaluator components included with Application Compatibility Toolkit aid in streamlining the testing and validation of Windows updates against installed applications. 

For information about these and other tools that are available, see Security Tools for IT Pros

Security Update Deployment

Affected Software

For information about the specific security update for your affected software, click the appropriate link:

Windows XP (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file names For Windows XP Service Pack 3:\ WindowsXP-KB2829361-x86-enu.exe
For Windows XP Professional x64 Edition Service Pack 2:\ WindowsServer2003.WindowsXP-KB2829361-x64-enu.exe
Installation switches See Microsoft Knowledge Base Article 262841
Update log file KB2829361.log
Restart requirement Yes, you must restart your system after you apply this security update.
Removal information Use Add or Remove Programs item in Control Panel or the Spuninst.exe utility located in the %Windir%$NTUninstallKB2829361$\Spuninst folder
File information See Microsoft Knowledge Base Article 2829361
Registry key verification For all supported 32-bit editions of Windows XP:\ HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP\SP4\KB2829361\Filelist
For all supported x64-based editions of Windows XP:\ HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP Version 2003\SP3\KB2829361\Filelist

Note The update for supported versions of Windows XP Professional x64 Edition also applies to supported versions of Windows Server 2003 x64 Edition.

Windows Server 2003 (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file names For all supported 32-bit editions of Windows Server 2003:\ WindowsServer2003-KB2829361-x86-enu.exe
For all supported x64-based editions of Windows Server 2003:\ WindowsServer2003.WindowsXP-KB2829361-x64-enu.exe
For all supported Itanium-based editions of Windows Server 2003:WindowsServer2003-KB2829361-ia64-enu.exe
Installation switches See Microsoft Knowledge Base Article 262841
Update log file KB2829361.log
Restart requirement Yes, you must restart your system after you apply this security update.
Removal information Use Add or Remove Programs item in Control Panel or the Spuninst.exe utility located in the %Windir%$NTUninstallKB2829361$\Spuninst folder
File information See Microsoft Knowledge Base Article 2829361
Registry key verification HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Server 2003\SP3\KB2829361\Filelist

Note The update for supported versions of Windows Server 2003 x64 Edition also applies to supported versions of Windows XP Professional x64 Edition.

Windows Vista (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file names For all supported 32-bit editions of Windows Vista:\ Windows6.0-KB2830290-x86.msu\ Windows6.0-KB2829361-x86.msu
For all supported x64-based editions of Windows Vista:\ Windows6.0-KB2830290-x64.msu\ Windows6.0-KB2829361-x64.msu
Installation switches See Microsoft Knowledge Base Article 934307
Restart requirement Yes, you must restart your system after you apply this security update.
Removal information WUSA.exe does not support uninstall of updates. To uninstall an update installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates and select from the list of updates.
File information See Microsoft Knowledge Base Article 2830290\ See Microsoft Knowledge Base Article 2829361
Registry key verification Note A registry key does not exist to validate the presence of this update.

Windows Server 2008 (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file names For all supported 32-bit editions of Windows Server 2008:\ Windows6.0-KB2830290-x86.msu\ Windows6.0-KB2829361-x86.msu
For all supported x64-based editions of Windows Server 2008:\ Windows6.0-KB2830290-x64.msu\ Windows6.0-KB2829361-x64.msu
For all supported Itanium-based editions of Windows Server 2008:\ Windows6.0-KB2830290-ia64.msu\ Windows6.0-KB2829361-ia64.msu
Installation switches See Microsoft Knowledge Base Article 934307
Restart requirement Yes, you must restart your system after you apply this security update.
Removal information WUSA.exe does not support uninstall of updates. To uninstall an update installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates and select from the list of updates.
File information See Microsoft Knowledge Base Article 2830290\ See Microsoft Knowledge Base Article 2829361
Registry key verification Note A registry key does not exist to validate the presence of this update.

Windows 7 (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file name For all supported 32-bit editions of Windows 7:\ Windows6.1-KB2830290-x86.msu\ Windows6.1-KB2829361-x86.msu
For all supported x64-based editions of Windows 7:\ Windows6.1-KB2830290-x64.msu\ Windows6.1-KB2829361-x64.msu
Installation switches See Microsoft Knowledge Base Article 934307
Restart requirement Yes, you must restart your system after you apply this security update.
Removal information To uninstall an update installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, and then under Windows Update, click View installed updates and select from the list of updates.
File information See Microsoft Knowledge Base Article 2830290\ See Microsoft Knowledge Base Article 2829361
Registry key verification Note A registry key does not exist to validate the presence of this update.

Windows Server 2008 R2 (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file name For all supported x64-based editions of Windows Server 2008 R2:\ Windows6.1-KB2830290-x64.msu\ Windows6.1-KB2829361-x64.msu
For all supported Itanium-based editions of Windows Server 2008 R2:\ Windows6.1-KB2830290-ia64.msu\ Windows6.1-KB2829361-ia64.msu
Installation switches See Microsoft Knowledge Base Article 934307
Restart requirement Yes, you must restart your system after you apply this security update.
Removal information To uninstall an update installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, and then under Windows Update, click View installed updates and select from the list of updates.
File information See Microsoft Knowledge Base Article 2830290\ See Microsoft Knowledge Base Article 2829361
Registry key verification Note A registry key does not exist to validate the presence of this update.

Windows 8 (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file name For all supported 32-bit editions of Windows 8:\ Windows8-RT-KB2830290-x86.msu\ Windows8-RT-KB2829361-x86.msu
For all supported 64-bit editions of Windows 8:\ Windows8-RT-KB2830290-x64.msu\ Windows8-RT-KB2829361-x64.msu
Installation switches See Microsoft Knowledge Base Article 934307
Restart requirement Yes, you must restart your system after you apply this security update.
Removal information To uninstall an update installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, click Windows Update, and then under See also, click Installed updates and select from the list of updates.
File information See Microsoft Knowledge Base Article 2830290\ See Microsoft Knowledge Base Article 2829361
Registry key verification Note A registry key does not exist to validate the presence of this update.

Windows Server 2012 (all editions)

Reference Table

The following table contains the security update information for this software.

Security update file name For all supported editions of Windows Server 2012:\ Windows8-RT-KB2830290-x64.msu\ Windows8-RT-KB2829361-x64.msu
Installation switches See Microsoft Knowledge Base Article 934307
Restart requirement Yes, you must restart your system after you apply this security update.
Removal information To uninstall an update installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, click Windows Update, and then under See also, click Installed updates and select from the list of updates.
File information See Microsoft Knowledge Base Article 2830290\ See Microsoft Knowledge Base Article 2829361
Registry key verification Note A registry key does not exist to validate the presence of this update.

Windows RT (all editions)

The following table contains the security update information for this software.

Deployment This update is available via Windows Update only.
Restart Requirement Yes, you must restart your system after you apply this security update.
Removal Information Click Control Panel, click System and Security, click Windows Update, and then under See also, click Installed updates and select from the list of updates.
File Information See Microsoft Knowledge Base Article 2830290\ See Microsoft Knowledge Base Article 2829361

Other Information

Acknowledgments

Microsoft thanks the following for working with us to help protect customers:

Microsoft Active Protections Program (MAPP)

To improve security protections for customers, Microsoft provides vulnerability information to major security software providers in advance of each monthly security update release. Security software providers can then use this vulnerability information to provide updated protections to customers via their security software or devices, such as antivirus, network-based intrusion detection systems, or host-based intrusion prevention systems. To determine whether active protections are available from security software providers, please go to the active protections websites provided by program partners, listed in Microsoft Active Protections Program (MAPP) Partners.

Support

How to obtain help and support for this security update

Disclaimer

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions

  • V1.0 (May 14, 2013): Bulletin published.
  • V1.1 (December 16, 2013): Revised bulletin to announce a detection change to correct an offering issue for Windows RT (2829361) and Windows RT (2830290). This is a detection change only. There were no changes to the update files. Customers who have successfully installed the update do not need to take any action.

Built at 2014-04-18T13:49:36Z-07:00