Security Bulletin

Microsoft Security Bulletin MS06-034 - Important

Vulnerability in Microsoft Internet Information Services using Active Server Pages Could Allow Remote Code Execution (917537)

Published: July 11, 2006 | Updated: July 19, 2006

Version: 1.2

Summary

Who Should Read this Document: Customers who use Microsoft Internet Information Services (IIS)

Impact of Vulnerability: Remote Code Execution

Maximum Severity Rating: Important

Recommendation: Customers should apply the update at the earliest opportunity.

Security Update Replacement: None

Caveats: Microsoft Knowledge Base Article 917537 documents the currently known issues that customers may experience when they install this security update. The article also documents recommended solutions for these issues. For more information, see Microsoft Knowledge Base Article 917537.

Tested Software and Security Update Download Locations:

Affected Software:

  • Microsoft Windows 2000 Service Pack 4 — Download the update
  • Microsoft Windows XP Professional Service Pack 1 and Microsoft Windows XP Professional Service Pack 2 — Download the update
  • Microsoft Windows XP Professional x64 Edition — Download the update
  • Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1 — Download the update
  • Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft Windows Server 2003 with Service Pack 1 for Itanium-based Systems — Download the update
  • Microsoft Windows Server 2003 x64 Edition family — Download the update

Affected Components:

  • Microsoft Internet Information Services (IIS) 6.0
  • Microsoft Internet Information Services (IIS) 5.1
  • Microsoft Internet Information Services (IIS) 5.0

Non-Affected Software:

  • Microsoft Windows XP Home Service Pack 1 and Microsoft Windows XP Home Service Pack 2

The software in this list has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.

Note The security updates for Microsoft Windows Server 2003, Windows Server 2003 Service Pack 1, and Windows Server 2003 x64 Edition also apply to Windows Server 2003 R2.

General Information

Executive Summary

Executive Summary:

This update resolves a newly discovered, privately reported vulnerability. The vulnerability is documented in the "Vulnerability Details" section of this bulletin.

An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

An attacker must have valid logon credentials, but if a server has been purposely configured to allow users, either anonymous or authenticated, to upload web content such as .ASP pages to web sites, the server could be exploited by this vulnerability.

We recommend that customers apply the update at the earliest opportunity.

Severity Ratings and Vulnerability Identifiers:

Vulnerability Identifiers Impact of Vulnerability Microsoft Internet Information Services (IIS) 6.0 on Windows 2003 (all versions) Microsoft Internet Information Services (IIS) 5.1 on Windows XP Professional Service Pack 1, Microsoft Windows XP Professional Service Pack 2 and Windows XP Professional x64 Edition Microsoft Internet Information Services (IIS) 5.0 on Windows 2000 Service Pack 4
Internet Information Services using Malformed Active Server Pages Vulnerability - CVE-2006-0026 Remote Code Execution Moderate Important Important

This assessment is based on the types of systems that are affected by the vulnerability, their typical deployment patterns, and the effect that exploiting the vulnerability would have on them.

Note The security updates for Microsoft Windows Server 2003, Windows Server 2003 Service Pack 1, and Windows Server 2003 x64 Edition also apply to Windows Server 2003 R2.

Note The severity ratings for non-x86 operating system versions map to the x86 operating systems versions as follows:

  • The Microsoft Windows XP Professional x64 Edition severity rating is the same as the Windows XP Service Pack 2 severity rating.
  • The Microsoft Windows Server 2003 for Itanium-based Systems severity rating is the same as the Windows Server 2003 severity rating.
  • The Microsoft Windows Server 2003 with SP1 for Itanium-based Systems severity rating is the same as the Windows Server 2003 Service Pack 1 severity rating.
  • The Microsoft Windows Server 2003 x64 Edition severity rating is the same as the Windows Server 2003 Service Pack 1 severity rating.

What are the known issues that customers may experience when they install this security update?

Microsoft Knowledge Base Article 917537 documents the currently known issues that customers may experience when they install this security update. The article also documents recommended solutions for these issues. For more information, see Microsoft Knowledge Base Article 917537.

Extended security update support for Microsoft Windows NT Workstation 4.0 Service Pack 6a and Windows 2000 Service Pack 2 ended on June 30, 2004. Extended security update support for Microsoft Windows NT Server 4.0 Service Pack 6a ended on December 31, 2004. Extended security update support for Microsoft Windows 2000 Service Pack 3 ended on June 30, 2005. I am still using one of these operating systems, what should I do?

Windows NT Workstation 4.0 Service Pack 6a, Windows NT Server 4.0 Service Pack 6a, Windows 2000 Service Pack 2, and Windows 2000 Service Pack 3 have reached the end of their life cycles. It should be a priority for customers who have these operating system versions to migrate to supported versions to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit the following Microsoft Support Lifecycle Web site. For more information about the extended security update support period for these operating system versions, visit the Microsoft Product Support Services Web site.

Customers who require custom support for these products must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information Web site, select the country, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Windows Operating System Product Support Lifecycle FAQ.

Can I use the Microsoft Baseline Security Analyzer (MBSA) or the Enterprise Update Scan Tool (EST) to determine whether this update is required?

The following table provides the MBSA detection summary for this security update.

Product MBSA 1.2.1 MBSA 2.0
Microsoft Internet Information Services (IIS) 6.0 on Windows 2003 (all versions) Yes Yes
Microsoft Internet Information Services (IIS) 5.1 on Windows XP Professional Service Pack 1, Microsoft Windows XP Professional Service Pack 2 Yes Yes
Internet Information Services (IIS) 5.0 on Windows 2000 Service Pack 4 Yes Yes

For more information about MBSA, visit the MBSA Web site.

For more information about the programs that Microsoft Update and MBSA 2.0 currently do not detect, see Microsoft Knowledge Base Article 895660.

Can I use Systems Management Server (SMS) to determine whether this update is required?

The following table provides the SMS summary for this security update.

Product SMS 2.0 SMS 2003
Microsoft Internet Information Services (IIS) 6.0 on Windows 2003 (all versions) Yes Yes
Microsoft Internet Information Services (IIS) 5.1 on Windows XP Professional Service Pack 1, Microsoft Windows XP Professional Service Pack 2 Yes Yes
Internet Information Services (IIS) 5.0 on Windows 2000 Service Pack 4 Yes Yes

For SMS 2.0, the SMS SUS Feature Pack, which includes the Security Update Inventory Tool, can be used by SMS to detect security updates. SMS SUIT uses the MBSA 1.2.1 engine for detection. For more information about the Security Update Inventory Tool, visit the following Microsoft Web site. For more information about the limitations of the Security Update Inventory Tool, see Microsoft Knowledge Base Article 306460. The SMS SUS Feature Pack also includes the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications.

For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 Inventory Tool for Microsoft Updates, visit the following Microsoft Web site. SMS 2003 can also use the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications.

For more information about SMS, visit the SMS Web site

For information about the EST see the FAQ “What is the Enterprise Update Scan Tool (EST)?” and the following Microsoft Web site

Vulnerability Details

Internet Information Services Using Malformed Active Server Pages Vulnerability - CVE-2006-0026

There is a remote code execution vulnerability in Internet Information Services (IIS). An attacker could exploit the vulnerability by constructing a specially crafted Active Server Pages (ASP) file, potentially allowing remote code execution if the Internet Information Services (IIS) processes the specially crafted file. An attacker who successfully exploited this vulnerability could take complete control of an affected system.

Mitigating Factors for Internet Information Services Using Malformed Active Server Pages ASP Vulnerability - CVE-2006-0026:

  • On IIS 5.0 and IIS 5.1, ASP enabled applications by default run in the 'Pooled Out of Process' application, which means they run in DLLHOST.exe, which is running in the context of the low privilege IWAM_<machinename> account.
  • By default, IIS 5.1 on Windows XP Professional and IIS 6.0 on Windows Server 2003 are not enabled.
  • By default, ASP is not enabled on IIS 6.0. If ASP is enabled, it runs in the context of a W3WP.exe worker process running as the low privilege 'NetworkService' account.
  • An attacker would require valid logon credentials to exploit this vulnerability. However, if a server has been intentionally configured to allow users, either anonymous or authenticated, to upload web content such as .ASP pages to web sites, the server could be attacked successfully by exploiting by this vulnerability.

Workarounds for Internet Information Services Using Malformed Active Server Pages Vulnerability - CVE-2006-0026:

We have not identified any workarounds for this vulnerability.

FAQ Workarounds for Internet Information Services Malformed Active Server Pages Vulnerability - CVE-2006-0026:

What is the scope of the vulnerability?
There is a remote code execution vulnerability in Internet Information Services (IIS) that results from the way that IIS handles Active Server Pages (ASP). An attacker could exploit the vulnerability by constructing a specially crafted Active Server Pages (ASP) file, which could potentially allow remote code execution if the Internet Information Services (IIS) processed the file. An attacker who successfully exploited this vulnerability could take complete control of an affected system.

What causes the vulnerability?
An unchecked buffer in IIS.

What is Active Server Pages (ASP)?
Microsoft Active Server Pages (ASP) is a server-side scripting technology that can be used to create dynamic and interactive Web applications. An ASP page is an HTML page that contains server-side scripts that are processed by the Web server before being sent to the user's browser.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could take complete control of the affected system.

Who could exploit the vulnerability?
An attacker would require valid logon credentials to the server in order to exploit the vulnerability. However if a server had been purposely configured to allow users, either anonymous or authenticated, to upload web content such as .ASP pages to web sites, the server could be attacked by exploit this vulnerability.

How could an attacker exploit the vulnerability?
An attacker could try to exploit the vulnerability by creating a specially crafted ASP file and uploading the file to an affected system. If IIS processed the file it could then cause the affected system to execute code.

What systems are primarily at risk from the vulnerability?
Windows 2000 Service Pack 4 systems running IIS 5.0 are primarily at risk from this vulnerability because IIS is enabled by default. Windows XP Professional and Windows Server 2003 are also at risk if the service is enabled.

Could the vulnerability be exploited over the Internet?
Yes. An attacker could try to exploit this vulnerability over the Internet if they are granted access to write to the server. Firewall best practices and standard default firewall configurations can help protect against attacks that originate from the Internet. Microsoft has provided information about how you can help protect your PC. End users can visit the Protect Your PC Web site. IT professionals can visit the Security Guidance Center Web site.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure. Microsoft had not received any information to indicate that this vulnerability had been publicly disclosed when this security bulletin was originally issued.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

Security Update Information

Affected Software:

For information about the specific security update for your affected software, click the appropriate link:

Windows Server 2003 (all versions)

Prerequisites
This security update requires Windows Server 2003 or Windows Server 2003 Service Pack 1.

Note The security updates for Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1 also apply to Microsoft Windows Server 2003 R2.

Inclusion in Future Service Packs:
The update for this issue will be included in future Service Pack or Update Rollup.

Installation Information

This security update supports the following setup switches.

Switch Description
/help Displays the command-line options.
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed.
/forcerestart Restarts the computer after installation and forces other applications to close at shutdown without saving open files first.
/warnrestart[:x] Displays a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart.
Special Options
/overwriteoem Overwrites OEM files without prompting.
/nobackup Does not back up files needed for uninstallation.
/forceappsclose Forces other programs to close when the computer shuts down.
/log: path Allows the redirection of installation log files.
/integrate:path Integrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path] Extracts files without starting the Setup program.
/ER Enables extended error reporting.
/verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Windows Server 2003:

Windowsserver2003-kb917537-x86-enu /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB917537.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows Server 2003:

Windowsserver2003-kb917537-x86-enu /norestart

For information about how to deploy this security update by using Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.

Restart Requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a reboot will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart your computer, see Microsoft Knowledge Base Article 887012.

This security update supports HotPatching on systems that have an Asp.dll file version of 6.0.3790.1830. If you use HotPatching, you can install security updates on systems that are running Microsoft Windows Server 2003 Service Pack 1, without restarting the servers. For more information about HotPatching and how to deploy a security update by using HotPatching, see Microsoft Knowledge Base Article 897341.

The security update that is available on Windows Update, Microsoft, Update, and Automatic Update make use of Hotpatching and will not require a restart of your server.

Removal Information

To remove this update, use Add or Remove Programs in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB917537$\Spuninst folder.

Switch Description
/help Displays the command-line options.
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed.
/forcerestart Restarts the computer after installation and forces other applications to close at shutdown without saving open files first.
/warnrestart[:x] Displays a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart.
Special Options
/forceappsclose Forces other programs to close when the computer shuts down.
/log:path Allows the redirection of installation log files.

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows Server 2003, Web Edition; Windows Server 2003, Standard Edition; Windows Server 2003, Datacenter Edition; Windows Server 2003, Enterprise Edition; Windows Small Business Server 2003; Windows Server 2003, Web Edition with SP1; Windows Server 2003, Standard Edition with SP1; Windows Server 2003, Enterprise Edition with SP1; Windows Server 2003, Datacenter Edition with SP1; Windows Server 2003 R2, Web Edition; Windows Server 2003 R2, Standard Edition; Windows Server 2003 R2, Datacenter Edition; Windows Server 2003 R2, Enterprise Edition; Windows Small Business Server 2003 R2:

File Name Version Date Time Size Folder
Asp.dll 6.0.3790.520 18-Apr-2006 03:11 341,504 RTMGDR
Asp.dll 6.0.3790.520 18-Apr-2006 03:06 344,576 RTMQFE
Asp.dll 6.0.3790.2684 19-Apr-2006 04:16 418,304 SP1GDR
Asp.hp.dll 6.0.3790.2684 19-Apr-2006 04:16 25,600 SP1GDR
Asp.dll 6.0.3790.2684 18-Apr-2006 03:30 379,392 SP1QFE

Windows Server, 2003 Enterprise Edition for Itanium-based Systems; Windows Server 2003, Datacenter Edition for Itanium-based Systems; Windows Server 2003, Enterprise Edition with SP1 for Itanium-based Systems; and Windows Server 2003, Datacenter Edition with SP1 for Itanium-based Systems:

File Name Version Date Time Size CPU Folder
Asp.dll 6.0.3790.520 19-Apr-2006 04:31 977,920 IA-64 RTMGDR
Asp.dll 6.0.3790.520 19-Apr-2006 04:31 985,088 IA-64 RTMQFE
Asp.dll 6.0.3790.2684 19-Apr-2006 04:34 1,061,888 IA-64 SP1GDR
Wasp.dll 6.0.3790.2684 19-Apr-2006 04:34 418,304 x86 SP1GDR\WOW
Asp.dll 6.0.3790.2684 19-Apr-2006 04:31 1,063,936 IA-64 SP1QFE
Wasp.dll 6.0.3790.2684 19-Apr-2006 04:31 379,392 x86 SP1QFE\WOW

Windows Server 2003, Standard x64 Edition; Windows Server 2003, Enterprise x64 Edition; and Windows Server 2003, Datacenter x64 Edition; Windows Server 2003 R2, Standard x64 Edition; Windows Server 2003 R2, Enterprise x64 Edition; and Windows Server 2003 R2, Datacenter x64 Edition:

File Name Version Date Time Size CPU Folder
Asp.dll 6.0.3790.2684 19-Apr-2006 04:34 610,304 x64 SP1GDR
Wasp.dll 6.0.3790.2684 19-Apr-2006 04:34 418,304 x86 SP1GDR\WOW
Asp.dll 6.0.3790.2684 19-Apr-2006 04:31 611,328 x64 SP1QFE
Wasp.dll 6.0.3790.2684 19-Apr-2006 04:31 379,392 x86 SP1QFE\WOW

Notes When you install these security updates, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer
    To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification
    Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.
      Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table.
      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification
    You may also be able to verify the files that this security update has installed by reviewing the following registry keys.

    Windows Server 2003, Web Edition; Windows Server 2003, Standard Edition; Windows Server 2003, Enterprise Edition; Windows Server 2003, Datacenter Edition; Windows Small Business Server 2003; Windows Server 2003, Web Edition with SP1; Windows Server 2003, Standard Edition with SP1; Windows Server 2003, Enterprise Edition with SP1; Windows Server 2003, Datacenter Edition with SP1; Windows Server 2003, Enterprise Edition for Itanium-based Systems; Windows Server 2003, Datacenter Edition for Itanium-based Systems; Windows Server 2003, Enterprise Edition with SP1 for Itanium-based Systems; Windows Server 2003, Datacenter Edition with SP1 for Itanium-based Systems; Windows Server 2003, Standard x64 Edition; Windows Server 2003, Enterprise x64 Edition; and Windows Server 2003, Datacenter x64 Edition Windows Server 2003 R2, Web Edition; Windows Server 2003 R2, Standard Edition; Windows Server 2003 R2, Datacenter Edition; Windows Server 2003 R2, Enterprise Edition; Windows Small Business Server 2003 R2::

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Server 2003\SP2\KB917537\Filelist

    Note This registry key may not contain a complete list of installed files. Also, this registry key may not be created correctly if an administrator or an OEM integrates or slipstreams the 917537 security update into the Windows installation source files.

Windows XP (all versions)

Prerequisites
This security update requires Microsoft Windows XP Service Pack 1 or a later version. For more information, see Microsoft Knowledge Base Article 322389.

Inclusion in Future Service Packs:
The update for this issue will be included in a future Service Pack or Update Rollup.

Installation Information

This security update supports the following setup switches.

Switch Description
/help Displays the command-line options.
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed.
/forcerestart Restarts the computer after installation and forces other applications to close at shutdown without saving open files first.
/warnrestart[:x] Displays a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart.
Special Options
/overwriteoem Overwrites OEM files without prompting.
/nobackup Does not back up files needed for uninstallation.
/forceappsclose Forces other programs to close when the computer shuts down.
/log:path Allows the redirection of installation log files.
/integrate:path Integrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path] Extracts files without starting the Setup program.
/ER Enables extended error reporting.
/verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Microsoft Windows XP:

Windowsxp-kb917537-x86-enu /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB917537.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows XP:

Windowsxp-kb917537-x86-enu /norestart

For information about how to deploy this security update by using Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.

Restart Requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a reboot will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart your computer, see Microsoft Knowledge Base Article 887012.

Removal Information

To remove this security update, use Add or Remove Programs in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB917537$\Spuninst folder.

Switch Description
/help Displays the command-line options.
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed.
/forcerestart Restarts the computer after installation and forces other applications to close at shutdown without saving open files first.
/warnrestart[:x] Displays a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart.
Special Options
/forceappsclose Forces other programs to close when the computer shuts down.
/log:path Allows the redirection of installation log files.

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows XP Professional Service Pack 1, Windows XP Tablet PC Edition, Windows XP Media Center Edition, Windows XP Professional Service Pack 2, Windows XP Tablet PC Edition 2005, and Windows XP Media Center Edition 2005:

File Name Version Date Time Size Folder
Asp.dll 5.1.2600.1829 18-Apr-2006 04:35 340,992 SP1QFE\IP
Asp.dll 5.1.2600.2889 18-Apr-2006 04:23 369,664 SP2GDR
Asp.dll 5.1.2600.2889 18-Apr-2006 04:24 369,664 SP2QFE

Windows XP Professional x64:

File Name Version Date Time Size CPU Folder
Asp.dll 6.0.3790.2684 19-Apr-2006 04:34 610,304 x64 SP1GDR
Wasp.dll 6.0.3790.2684 19-Apr-2006 04:34 418,304 x86 SP1GDR\WOW
Asp.dll 6.0.3790.2684 19-Apr-2006 04:31 611,328 x64 SP1QFE
Wasp.dll 6.0.3790.2684 19-Apr-2006 04:31 379,392 x86 SP1QFE\WOW

Notes When you install these security updates, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer
    To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification
    Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.
      Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table.
      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification
    You may also be able to verify the files that this security update has installed by reviewing the following registry keys.

    For Windows XP Home Edition Service Pack 1, Windows XP Professional Service Pack 1, Windows XP Tablet PC Edition, Windows XP Media Center Edition, Windows XP Home Edition Service Pack 2, Windows XP Professional Service Pack 2, Windows XP Tablet PC Edition 2005, and Windows XP Media Center Edition 2005:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP\SP3\KB917537\Filelist

    For Windows XP Professional x64 Edition:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP Version 2003\SP2\KB917537\Filelist

    Note These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly if an administrator or an OEM integrates or slipstreams the 917537 security update into the Windows installation source files.

Windows 2000 (all versions)

Prerequisites
For Windows 2000, this security update requires Service Pack 4 (SP4). For Small Business Server 2000, this security update requires Small Business Server 2000 Service Pack 1a (SP1a) or Small Business Server 2000 running with Windows 2000 Server Service Pack 4 (SP4).

The software that is listed has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.

For more information about how to obtain the latest service pack, see Microsoft Knowledge Base Article 260910.

Inclusion in Future Service Packs:
The update for this issue may be included in a future Update Rollup.

Installation Information

This security update supports the following setup switches.

Switch Description
/help Displays the command-line options.
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed.
/forcerestart Restarts the computer after installation and forces other applications to close at shutdown without saving open files first.
/warnrestart[:x] Displays a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart.
Special Options
/overwriteoem Overwrites OEM files without prompting.
/nobackup Does not back up files needed for uninstallation.
/forceappsclose Forces other programs to close when the computer shuts down.
/log:path Allows the redirection of installation log files.
/integrate:path Integrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path] Extracts files without starting the Setup program.
/ER Enables extended error reporting.
/verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site. For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Windows 2000 Service Pack 4:

Windows2000-kb917537-x86-enu /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB917537.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows 2000 Service Pack 4:

Windows2000-kb917537-x86-enu /norestart

For more information about how to deploy this security update with Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.

Restart Requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

To help reduce the chance that a reboot will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart your computer, see Microsoft Knowledge Base Article 887012.

Removal Information

To remove this security update, use Add or Remove Programs in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB917537$\Spuninst folder.

Switch Description
/help Displays the command-line options.
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed.
/forcerestart Restarts the computer after installation and forces other applications to close at shutdown without saving open files first.
/warnrestart[:x] Displays a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart.
Special Options
/forceappsclose Forces other programs to close when the computer shuts down.
/log:path Allows the redirection of installation log files.

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows 2000 Service Pack 4 and Small Business Server 2000:

File Name Version Date Time Size
Asp.dll 5.0.2195.7084 11-Apr-2006 18:05 337,168

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer
    To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification
    Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.
      Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table.
      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification
    You may also be able to verify the files that this security update has installed by reviewing the following registry key:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows 2000\SP5\KB917537\Filelist

    Note This registry key may not contain a complete list of installed files. Also, this registry key may not be created correctly when an administrator or an OEM integrates or slipstreams the 917537 security update into the Windows installation source files.

Other Information

Acknowledgments

Microsoft thanks the following for working with us to help protect customers:

Obtaining Other Security Updates:

Updates for other security issues are available at the following locations:

Support:

  • Customers in the U.S. and Canada can receive technical support from Microsoft Product Support Services at 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates.
  • International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

Security Resources:

Software Update Services:

By using Microsoft Software Update Services (SUS), administrators can quickly and reliably deploy the latest critical updates and security updates to Windows 2000 and Windows Server 2003-based servers, and to desktop systems that are running Windows 2000 Professional or Windows XP Professional.

For more information about how to deploy security updates by using Software Update Services, visit the Software Update Services Web site.

Windows Server Update Services:

By using Windows Server Update Services (WSUS), administrators can quickly and reliably deploy the latest critical updates and security updates for Windows 2000 operating systems and later, Office XP and later, Exchange Server 2003, and SQL Server 2000 onto Windows 2000 and later operating systems.

For more information about how to deploy security updates using Windows Server Update Services, visit the Windows Server Update Services Web site.

Systems Management Server:

Microsoft Systems Management Server (SMS) delivers a highly configurable enterprise solution for managing updates. By using SMS, administrators can identify Windows-based systems that require security updates and can perform controlled deployment of these updates throughout the enterprise with minimal disruption to end users. For more information about how administrators can use SMS 2003 to deploy security updates, visit the SMS 2003 Security Patch Management Web site. SMS 2.0 users can also use Software Updates Service Feature Pack to help deploy security updates. For information about SMS, visit the SMS Web site.

Note SMS uses the Microsoft Baseline Security Analyzer, the Microsoft Office Detection Tool, and the Enterprise Update Scanning Tool to provide broad support for security bulletin update detection and deployment. Some software updates may not be detected by these tools. Administrators can use the inventory capabilities of the SMS in these cases to target updates to specific systems. For more information about this procedure, visit the following Web site. Some security updates require administrative rights following a restart of the system. Administrators can use the Elevated Rights Deployment Tool (available in the SMS 2003 Administration Feature Pack and in the SMS 2.0 Administration Feature Pack) to install these updates.

Disclaimer:

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions:

  • V1.0 (July 11, 2006): Bulletin published.
  • V1.1 (July 12, 2006): Bulletin updated to provide clarity around the “File Information” for Windows XP in the “Security Update Section”.
  • V1.2 (July 19, 2006): Bulletin updated “Caveats” Section.

Built at 2014-04-18T13:49:36Z-07:00