Security Bulletin

Microsoft Security Bulletin MS08-026 - Critical

Vulnerabilities in Microsoft Word Could Allow Remote Code Execution (951207)

Published: May 13, 2008 | Updated: May 14, 2008

Version: 1.1

General Information

Executive Summary

This security update resolves several privately reported vulnerabilities in Microsoft Word that could allow remote code execution if a user opens a specially crafted Word file. An attacker who successfully exploited these vulnerabilities could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

This security update is rated Critical for supported editions of Microsoft Word 2000 and Microsoft Outlook 2007 and rated Important for supported editions of Microsoft Word 2002; Microsoft Word 2003; Microsoft Word Viewer 2003 and Microsoft Word Viewer 2003 Service Pack 3; Microsoft Word 2007; Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats; and Microsoft Office 2004 for Mac and Microsoft Office 2008 for Mac. For more information, see the subsection, Affected and Non-Affected Software, in this section.

This security update addresses the vulnerability by modifying the way that Microsoft Word handles specially crafted Word files. For more information about the vulnerabilities, see the Frequently Asked Questions (FAQ) subsection for the specific vulnerability entry under the next section, Vulnerability Information.

Note This update includes additional security mitigations against public attacks using Microsoft Word to exploit vulnerabilities in Microsoft Jet Database Engine first described in Microsoft Security Advisory 950627. In addition to installing this update, we recommend that customers install the update provided in Microsoft Security Bulletin MS08-028: Vulnerability in Microsoft Jet Database Engine Could Allow Remote Code Execution (950749) for the most up to date protection against these types of attacks.

Recommendation. Microsoft recommends that customers apply the update immediately.

Known Issues. None

Affected and Non-Affected Software

The following software have been tested to determine which versions or editions are affected. Other versions or editions are either past their support life cycle or are not affected. To determine the support life cycle for your software version or edition, visit Microsoft Support Lifecycle.

Affected Software

Office Suite and Other Software Component Maximum Security Impact Aggregate Severity Rating Bulletins Replaced by this Update
Microsoft Office Suites and Components
Microsoft Office 2000 Service Pack 3 Microsoft Word 2000 Service Pack 3 (KB950250) Remote Code Execution Critical MS08-009
Microsoft Office XP Service Pack 3 Microsoft Word 2002 Service Pack 3 (KB950243) Remote Code Execution Important MS08-009
Microsoft Office 2003 Service Pack 2 Microsoft Word 2003 Service Pack 2 (KB950241) Remote Code Execution Important MS08-009
Microsoft Office 2003 Service Pack 3 Microsoft Word 2003 Service Pack 3 (KB950241) Remote Code Execution Important MS08-009
2007 Microsoft Office System Microsoft Word 2007 (KB950113) Remote Code Execution Important None
Microsoft Outlook 2007 (KB950113) Remote Code Execution Critical None
2007 Microsoft Office System Service Pack 1 Microsoft Word 2007 Service Pack 1 (KB950113) Remote Code Execution Important None
Microsoft Outlook 2007 Service Pack 1 (KB950113) Remote Code Execution Critical None
Other Office Software
Microsoft Word Viewer 2003 (KB950625) Not applicable Remote Code Execution Important MS08-009
Microsoft Word Viewer 2003 Service Pack 3 (KB950625) Not applicable Remote Code Execution Important MS07-024
Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats (KB951808) Not applicable Remote Code Execution Important None
Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats Service Pack 1 (KB951808) Not applicable Remote Code Execution Important None
Microsoft Office for Mac
Microsoft Office 2004 for Mac (KB952332) Not applicable Remote Code Execution Important MS08-014
Microsoft Office 2008 for Mac (KB952331) Not applicable Remote Code Execution Important MS08-014

Non-Affected Software

Office and Other Software
Microsoft Works 8.0
Microsoft Works 8.5
Microsoft Works 9.0
Microsoft Works Suite 2005
Microsoft Works Suite 2006

Why is this update rated Critical for Outlook 2007?
The update for Outlook 2007 is rated Critical because of the e-mail attack vector described in the FAQ section of the Object Parsing Vulnerability - CVE-2008-1091 in this bulletin. Outlook 2007 users should apply the update immediately to protect against attacks that attempt to leverage the preview pane to exploit this vulnerability.

The Office component discussed in this article is part of the Office Suite that I have installed on my system; however, I did not choose to install this specific component. Will I be offered this update?
Yes, if the version of the Office Suite installed on your system shipped with the component discussed in this bulletin, the system will be offered updates for it whether the component is installed or not. The detection logic used to scan for affected systems is designed to check for updates for all components that shipped with the particular Office Suite and offer the updates to a system. Users who choose not to apply an update for a component that is not installed, but is included in the version of the Office Suite, will not increase the security risk of that system. However, users who do choose to install the update will not have a negative impact on the security or performance of a system. For more information on this issue, please see Microsoft Knowledge Base Article 830335.

Where are the file information details?
The file information details can be found in Microsoft Knowledge Base Article 951207.

Why does this update address several reported security vulnerabilities?
This update contains support for several vulnerabilities because the modifications that are required to address these issues are located in related files. Instead of having to install several updates that are almost the same, customers need to install this update only.

Does this update contain any security-related changes to functionality?
Yes. In addition to the changes that are listed in the "Vulnerability Details" section of this bulletin, this update includes logic enhancements to security warnings that mitigate Word as an attack vector used to exploit vulnerabilities in Microsoft Jet Database Engine first described in Microsoft Security Advisory 950627. Prior to this update, Word was vulnerable to attacks when opening a specially crafted Word document containing a malicious Jet database file. After applying this update, Word will prompt a user for confirmation before running SQL commands or queries when opening Word documents. In addition to installing this update, we highly recommend that customers install the update provided in Microsoft Security Bulletin MS08-028: Vulnerabilities in Microsoft Jet Database Engine Could Allow Remote Code Execution (950749) for the most up-to-date protection against these types of attacks.

This is a Microsoft Word update. Why are Microsoft Outlook 2007 and Microsoft Outlook 2007 Service Pack 1 referenced in the Affected Software table?
The files that are updated to address the vulnerabilities documented in this bulletin are core files to Microsoft Word. For Microsoft Word 2007 and Microsoft Word 2007 Service Pack 1, some of these core files are shared with Microsoft Outlook 2007 and Microsoft Outlook 2007 Service Pack 1, and provide functionality, such as editing, to Outlook. Therefore, Outlook 2007 and Outlook 2007 Service Pack 1 need to be updated as well, and Word 2007 and Word 2007 Service Pack 1 and Outlook 2007 and Outlook 2007 Service Pack 1 are serviced by the same package.

Users with only Outlook 2007 or Outlook 2007 Service Pack 1 installed will still need to apply this Word update to their systems. Users with Outlook 2007 or Outlook 2007 Service Pack 1 that also have Word 2007 or Word 2007 Service Pack 1 installed will also need to apply this update but they will only need to install it once. For more information on this issue, please see Microsoft Knowledge Base Article 949370.

I use Microsoft Office 2003 Service Pack 2. Are any additional security features included in this update?
Yes, as part of the servicing model for Microsoft Office 2003, when users of Microsoft Office 2003 Service Pack 2 install this update, their systems will be upgraded to security functionality that was initially released with Microsoft Office 2003 Service Pack 3. All updates released after January 1, 2008 for Microsoft Office 2003 Service Pack 2 will include these security features, which were introduced in Microsoft Office 2003 Service Pack 3. We have thoroughly tested this update, but as with all updates, we recommend that users perform testing appropriate to the environment and configuration of their systems. For more information on this issue, please see Microsoft Knowledge Base Article 951646.

Why is this update rated Critical for Word 2000 but only rated Important for all other affected versions of Word?
Users who are running Word 2002 and later have a built-in feature that will prompt a user to Open, Save, or Cancel before opening a document. This mitigating factor reduces the vulnerability from Critical to Important because the vulnerability requires more than a single user action to complete the exploit.

I am using an older release of the software discussed in this security bulletin. What should I do?
The affected software listed in this bulletin have been tested to determine which releases are affected. Other releases are past their support life cycle. To determine the support life cycle for your software release, visit Microsoft Support Lifecycle.

It should be a priority for customers who have older releases of the software to migrate to supported releases to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit Microsoft Support Lifecycle. For more information about the extended security update support period for these software versions or editions, visit Microsoft Product Support Services.

Customers who require custom support for older releases must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit Microsoft Worldwide Information, select the country, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Windows Operating System Product Support Lifecycle FAQ.

Vulnerability Information

Severity Ratings and Vulnerability Identifiers

Affected Software Object Parsing Vulnerability - CVE-2008-1091 Word Cascading Style Sheet (CSS) Vulnerability - CVE-2008-1434 Aggregate Severity Rating
Microsoft Word 2000 Service Pack 3 Critical\ Remote Code Execution Critical\ Remote Code Execution Critical
Microsoft Word 2002 Service Pack 3 Important\ Remote Code Execution Important\ Remote Code Execution Important
Microsoft Word 2003 Service Pack 2 and Microsoft Word 2003 Service Pack 3 Important\ Remote Code Execution Important\ Remote Code Execution Important
Microsoft Word Viewer 2003 and Microsoft Word Viewer 2003 Service Pack 3 Important\ Remote Code Execution Important\ Remote Code Execution Important
Microsoft Word 2007 and Microsoft Word 2007 Service Pack 1 Important\ Remote Code Execution Important\ Remote Code Execution Important
Microsoft Outlook 2007 and Microsoft Outlook 2007 Service Pack 1 Critical\ Remote Code Execution Important\ Remote Code Execution Critical
Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats and Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats Service Pack 1 Important\ Remote Code Execution Important\ Remote Code Execution Important
Microsoft Office 2004 for Mac Important\ Remote Code Execution Important\ Remote Code Execution Important
Microsoft Office 2008 for Mac Important\ Remote Code Execution Important\ Remote Code Execution Important

Object Parsing Vulnerability - CVE-2008-1091

A remote code execution vulnerability exists in the way that Microsoft Office handles specially crafted Rich Text Format (.rtf) files. The vulnerability could allow remote code execution if a user opens a specially crafted .rtf file with malformed strings in Word or previews a specially crafted .rtf file with malformed strings in rich text e-mail. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2008-1091.

Mitigating Factors for Object Parsing Vulnerability - CVE-2008-1091

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
  • An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
  • Users who have installed and are using the Office Document Open Confirmation Tool for Office 2000 will be prompted with Open, Save, or Cancel before opening a document. The features of the Office Document Open Confirmation Tool are incorporated in Office XP and later editions of Office.

Workarounds for Object Parsing Vulnerability - CVE-2008-1091

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality.

  • Use Microsoft Office File Block policy to prevent the opening of Office 2003 and earlier documents from unknown or untrusted sources and locations.

    The following registry scripts can be used to set the File Block policy.

    Note Modifying the Registry incorrectly can cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that problems resulting from incorrect modification of the Registry can be solved. Modify the Registry at your own risk.

    For Office 2003

    Windows Registry Editor Version 5.00

    [HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Word\Security\FileOpenBlock]

    "RTFFiles"=dword:00000001

    Note In order to use 'FileOpenBlock' with Office 2003, all of the latest Office 2003 security updates as of May 2007 must be applied.

    Impact of Workaround: Users who have configured the File Block policy and have not configured a special “exempt directory” as discussed in Microsoft Knowledge Base Article 922848 will be unable to open Office 2003 files or earlier versions in Office 2003 or 2007 Microsoft Office System.

    How to undo the workaround:

    Windows Registry Editor Version 5.00

    [HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Word\Security\FileOpenBlock]

    "RTFFiles"=dword:00000000

    For Office 2007

    Windows Registry Editor Version 5.00

    [HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\12.0\Word\Security\FileOpenBlock]

    "RTFFiles"=dword:00000001

    Note In order to use 'FileOpenBlock' with Office 2007, all of the latest Office 2007 security updates as of May 2007 must be applied.

    Impact of Workaround: Users who have configured the File Block policy and have not configured a special “exempt directory” as discussed in Microsoft Knowledge Base Article 922848 will be unable to open .rtf files in Office 2003 or 2007 Microsoft Office System.

    How to undo the workaround:

    Windows Registry Editor Version 5.00

    [HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\12.0\Word\Security\FileOpenBlock]

    "RTFFiles"=dword:00000000

  • Read e-mail messages in plain text format to protect against the e-mail attack vector.

  • Do not open or save Microsoft Office files that you receive from untrusted sources or that you receive unexpectedly from trusted sources. This vulnerability could be exploited when a user opens a specially crafted file.

FAQ for Object Parsing Vulnerability - CVE-2008-1091

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

What causes the vulnerability?
The vulnerability is caused by a memory calculation error when processing a malformed string in a specially crafted .rtf file. The error may corrupt system memory in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could take complete control of an affected system. If a user is logged on with administrative user rights, an attacker could take complete control of the affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

How could an attacker exploit the vulnerability?
This vulnerability requires that a user open a specially crafted .rtf file with an affected version of Microsoft Word.

In an e-mail attack scenario, an attacker could exploit the vulnerability by sending a specially crafted RTF e-mail to a system that uses Word as its default editor and previews the e-mail in either Rich Text Format or as HTML.

Note By default, Outlook 2003 does not use Word as its default editor. However, Outlook 2007 does.

In a Web-based attack scenario, an attacker would have to host a Web site that contains a .rtf file that is used to attempt to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted Web site. Instead, an attacker would have to convince them to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes them to the attacker's site.

What systems are primarily at risk from the vulnerability?
Systems where Microsoft Word and or Microsoft Outlook is used are primarily at risk. Servers could be at more risk if administrators allow users to log on to servers and to run programs. However, best practices strongly discourage allowing this.

What does the update do?
The update removes the vulnerability by modifying the way Word calculates the required memory allocation when opening .rtf files.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure. Microsoft had not received any information to indicate that this vulnerability had been publicly disclosed when this security bulletin was originally issued. This security bulletin addresses the privately disclosed vulnerability as well as additional issues discovered through internal investigations.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

Word Cascading Style Sheet (CSS) Vulnerability - CVE-2008-1434

A remote code execution vulnerability exists in the way that Microsoft Word handles specially crafted Word files. The vulnerability could allow remote code execution if a user opens a specially crafted Word file that includes a malformed CSS value. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2008-1434.

Mitigating Factors for Word Cascading Style Sheet (CSS) Vulnerability - CVE-2008-1434

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • The vulnerability cannot be exploited automatically through e-mail. For an attack to be successful, a user must open an attachment that is sent in an e-mail message.
  • In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
  • An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
  • Users who have installed and are using the Office Document Open Confirmation Tool for Office 2000 will be prompted with Open, Save, or Cancel before opening a document. The features of the Office Document Open Confirmation Tool are incorporated in Office XP and later editions of Office.

Workarounds for Word Cascading Style Sheet Vulnerability - CVE-2008-1434

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality.

  • Use Microsoft Office File Block policy to prevent the opening of Office 2003 and earlier documents from unknown or untrusted sources and locations.

    The following registry scripts can be used to set the File Block policy.

    Note Modifying the Registry incorrectly can cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that problems resulting from incorrect modification of the Registry can be solved. Modify the Registry at your own risk.

    For Office 2003

    Windows Registry Editor Version 5.00

    [HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Word\Security\FileOpenBlock]

    "HTMLFiles"=dword:00000001

    Note In order to use 'FileOpenBlock' with Office 2003, all of the latest Office 2003 security updates as of May 2007 must be applied.

    Impact of Workaround: Users who have configured the File Block policy and have not configured a special “exempt directory” as discussed in Microsoft Knowledge Base Article 922848 will be unable to open HTML documents in Word or Outlook.

    How to undo the workaround:

    Windows Registry Editor Version 5.00

    [HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Word\Security\FileOpenBlock]

    "HTMLFiles"=dword:00000000

    For Office 2007

    Windows Registry Editor Version 5.00

    [HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\12.0\Word\Security\FileOpenBlock]

    "HTMLFiles"=dword:00000001

    Note In order to use 'FileOpenBlock' with Office 2007, all of the latest Office 2007 security updates as of May 2007 must be applied.

    Impact of Workaround: Users who have configured the File Block policy and have not configured a special “exempt directory” as discussed in Microsoft Knowledge Base Article 922848 will be unable to open HTML documents in Word 2003 or 2007 Microsoft Office System.

    How to undo the workaround:

    Windows Registry Editor Version 5.00

    [HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\12.0\Word\Security\FileOpenBlock]

    "HTMLFiles"=dword:00000000

  • Do not open or save Microsoft Office files that you receive from untrusted sources or that you receive unexpectedly from trusted sources. This vulnerability could be exploited when a user opens a specially crafted file.

FAQ for Word Cascading Style Sheet Vulnerability - CVE-2008-1434

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

What causes the vulnerability?
The vulnerability is caused by a memory handling error when processing CSS values in a specially crafted Word file. The error may corrupt system memory in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could take complete control of an affected system. If a user is logged on with administrative user rights, an attacker could take complete control of the affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

How could an attacker exploit the vulnerability?
This vulnerability requires that a user open a specially crafted Word file with an affected version of Microsoft Word.

In an e-mail attack scenario, an attacker could exploit the vulnerability by sending a specially-crafted Word file to the user and by convincing the user to open the file.

In a Web-based attack scenario, an attacker would have to host a Web site that contains a Word file that is used to attempt to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted Web site. Instead, an attacker would have to convince them to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes them to the attacker's site.

What systems are primarily at risk from the vulnerability?
Systems where Microsoft Word is used are primarily at risk. Servers could be at more risk if administrators allow users to log on to servers and to run programs. However, best practices strongly discourage allowing this.

What does the update do?
The update removes the vulnerability by modifying the way that Word manages memory in processing CSS values when opening Word files.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure. Microsoft had not received any information to indicate that this vulnerability had been publicly disclosed when this security bulletin was originally issued. This security bulletin addresses the privately disclosed vulnerability as well as additional issues discovered through internal investigations.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

Update Information

Detection and Deployment Tools and Guidance

Manage the software and security updates you need to deploy to the servers, desktop, and mobile systems in your organization. For more information see the TechNet Update Management Center. The Microsoft TechNet Security Web site provides additional information about security in Microsoft products.

Security updates are available from Microsoft Update, Windows Update, and Office Update. Security updates are also available from the Microsoft Download Center. You can find them most easily by doing a keyword search for "security update."

Finally, security updates can be downloaded from the Microsoft Update Catalog. The Microsoft Update Catalog provides a searchable catalog of content made available through Windows Update and Microsoft Update, including security updates, drivers and service packs. By searching using the security bulletin number (such as, “MS07-036”), you can add all of the applicable updates to your basket (including different languages for an update), and download to the folder of your choosing. For more information about the Microsoft Update Catalog, see the Microsoft Update Catalog FAQ.

Detection and Deployment Guidance

Microsoft has provided detection and deployment guidance for this month’s security updates. This guidance will also help IT professionals understand how they can use various tools to help deploy the security update, such as Windows Update, Microsoft Update, Office Update, the Microsoft Baseline Security Analyzer (MBSA), the Office Detection Tool, Microsoft Systems Management Server (SMS), and the Extended Security Update Inventory Tool. For more information, see Microsoft Knowledge Base Article 910723.

Microsoft Baseline Security Analyzer

Microsoft Baseline Security Analyzer (MBSA) allows administrators to scan local and remote systems for missing security updates as well as common security misconfigurations. For more information about MBSA, visit Microsoft Baseline Security Analyzer.

The following table provides the MBSA detection summary for this security update.

Software MBSA 2.1
Microsoft Word 2000 Service Pack 3 No
Microsoft Word 2002 Service Pack 3 Yes
Microsoft Word 2003 Service Pack 2 Yes
Microsoft Word 2003 Service Pack 3 Yes
Microsoft Word Viewer 2003 Yes
Microsoft Word Viewer 2003 Service Pack 3 Yes
Microsoft Word 2007 Yes
Microsoft Word 2007 Service Pack 1 Yes
Microsoft Outlook 2007 Yes
Microsoft Outlook 2007 Service Pack 1 Yes
Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats Yes
Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats Service Pack 1 Yes
Microsoft Office 2004 for Mac No
Microsoft Office 2008 for Mac No

For more information about MBSA 2.1, see MBSA 2.1 Frequently Asked Questions.

Note For customers using legacy software not supported by MBSA 2.1, Microsoft Update, and Windows Server Update Services: please visit Microsoft Baseline Security Analyzer and reference the Legacy Product Support section on how to create comprehensive security update detection with legacy tools.

Windows Server Update Services

By using Windows Server Update Services (WSUS), administrators can deploy the latest critical updates and security updates for Windows 2000 operating systems and later, Office XP and later, Exchange Server 2003, and SQL Server 2000. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site.

Systems Management Server

The following table provides the SMS detection and deployment summary for this security update.

Software SMS 2.0 SMS 2003 with SUSFP SMS 2003 with ITMU SCCM 2007
Microsoft Word 2000 Service Pack 3 Yes Yes No No
Microsoft Word 2002 Service Pack 3 Yes Yes Yes Yes
Microsoft Word 2003 Service Pack 2 Yes Yes Yes Yes
Microsoft Word 2003 Service Pack 3 Yes Yes Yes Yes
Microsoft Word Viewer 2003 Yes Yes Yes Yes
Microsoft Word Viewer 2003 Service Pack 3 Yes Yes Yes Yes
Microsoft Word 2007 No No Yes Yes
Microsoft Word 2007 Service Pack 1 No No Yes Yes
Microsoft Outlook 2007 No No Yes Yes
Microsoft Outlook 2007 Service Pack 1 No No Yes Yes
Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats No No Yes Yes
Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats Service Pack 1 No No Yes Yes
Microsoft Office 2004 for Mac No No No No
Microsoft Office 2008 for Mac No No No No

For SMS 2.0 and SMS 2003, the SMS SUS Feature Pack (SUSFP), which includes the Security Update Inventory Tool (SUIT), can be used by SMS to detect security updates. See also Downloads for Systems Management Server 2.0.

For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates (ITMU) can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 ITMU, see SMS 2003 Inventory Tool for Microsoft Updates. SMS 2003 can also use the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications. For more information about the Office Inventory Tool and other scanning tools, see SMS 2003 Software Update Scanning Tools. See also Downloads for Systems Management Server 2003.

System Center Configuration Manager (SCCM) 2007 uses WSUS 3.0 for detection of updates. For more information about SCCM 2007 Software Update Management, visit System Center Configuration Manager 2007.

For more information about SMS, visit the SMS Web site.

For more detailed information, see Microsoft Knowledge Base Article 910723: Summary list of monthly detection and deployment guidance articles.

Note If you have used an Administrative Installation Point (AIP) for deploying Office 2000, Office XP or Office 2003, you may not be able to deploy the update using SMS if you have updated the AIP from the original baseline. For more information, see the Office Administrative Installation Point heading in this section.

Office Administrative Installation Point

If you installed your application from a server location, the server administrator must update the server location with the administrative update and deploy that update to your system.

Security Update Deployment

Affected Software

For information about the specific security update for your affected software, click the appropriate link:

Word 2000

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service Packs There are no more service packs planned for this software. The update for this issue may be included in a future update rollup.
Deployment
Installing without user intervention office2000-kbB950250 -fullfile-enu/q:a
Installing without restarting office2000-kbB950250 -fullfile-enu /r:n
Update log file Not applicable
Further information For detection and deployment, see the earlier section, Detection and Deployment Tools and Guidance.\ \ For features you can selectively install, see the Office Features for Administrative Installations subsection in this section.
Restart Requirement
Restart required? This update does not require a restart.
Hotpatching Not applicable
Removal Information After you install the update, you cannot remove it. To revert to an installation before the update was installed, you must remove the application, and then install it again from the original media.
File Information See Microsoft Knowledge Base Article 951207
Registry Key Verification Not applicable

Office Features for Administrative Installations

Server administrators who use a Windows Installer Administrative Installation must update the server location. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

The following table contains the list of feature names (case sensitive) that must be reinstalled for the update.

To install all features, you can use REINSTALL=ALL or you can install the following features:

Product Feature
O9PRO, O9STD WORDFiles

Note Administrators working in managed environments can find resources for deploying Office updates in an organization at the Office Admin Update Center. At that site, scroll down and look under the Update Resources section for the software version you are updating. The Windows Installer Documentation also provides more information about the setup switches supported by Windows Installer.

Deployment Information

Installing the Update

You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and Deployment Tools and Guidance subsection.

This security update requires that Windows Installer 2.0 or later be installed on the system. All supported versions of Windows include Windows Installer 2.0 or a later version.

To install the latest version of Windows Installer, visit one of the following Microsoft Web sites:

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches

Switch Description
/q Specifies quiet mode, or suppresses prompts, when files are being extracted.
/q:u Specifies user-quiet mode, which presents some dialog boxes to the user.
/q:a Specifies administrator-quiet mode, which does not present any dialog boxes to the user.
/t:path Specifies the target folder for extracting files.
/c Extracts the files without installing them. If /t:path is not specified, you are prompted for a target folder.
/c:path Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.
/r:n Never restarts the system after installation.
/r:I Prompts the user to restart the system if a restart is required, except when used with /q:a.
/r:a Always restarts the system after installation.
/r:s Restarts the system after installation without prompting the user.
/n:v No version checking - Install the program over any earlier version.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

After you install the update, you cannot remove it. To revert to an installation before the update was installed; you must remove the application, and then install it again from the original media.

Verifying That the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several versions and editions of Microsoft Office, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.
      Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.
      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Word 2002

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service Packs There are no more service packs planned for this software. The update for this issue may be included in a future update rollup.
Deployment
Installing without user intervention officeXP-kb950243-fullfile-enu /q:a
Installing without restarting officeXP-kb950243-fullfile-enu /r:n
Update log file Not applicable
Further information For detection and deployment, see the earlier section, Detection and Deployment Tools and Guidance.\ \ For features you can selectively install, see the Office Features for Administrative Installations subsection in this section.
Restart Requirement
Restart required? This update does not require a restart.
Hotpatching Not applicable
Removal Information Use Add or Remove Programs tool in Control Panel.Note When you remove this update, you may be prompted to insert the Microsoft Office XP CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.
File Information See Microsoft Knowledge Base Article 951207
Registry Key Verification Not applicable

Office Features

The following table contains the list of feature names (case sensitive) that must be reinstalled for the update. To install all features, you can use REINSTALL=ALL or you can install the following features:

Product Feature
PIPC1, PROPLUS, PRO, SBE, STD, STDEDU, WORD WORDFiles

Note Administrators working in managed environments can find complete resources for deploying Office updates in an organization at the Office Admin Update Center. At that site, scroll down and look under the Update Resources section for the software version you are updating. The Windows Installer Documentation also provides more information about the parameters supported by Windows Installer.

Deployment Information

Installing the Update

You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

This security update requires that Windows Installer 2.0 or later be installed on the system. All supported versions of Windows include Windows Installer 2.0 or a later version.

To install the latest version of Windows Installer, visit one of the following Microsoft Web sites:

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches

Switch Description
/q Specifies quiet mode, or suppresses prompts, when files are being extracted.
/q:u Specifies user-quiet mode, which presents some dialog boxes to the user.
/q:a Specifies administrator-quiet mode, which does not present any dialog boxes to the user.
/t:path Specifies the target folder for extracting files.
/c Extracts the files without installing them. If /t:path is not specified, you are prompted for a target folder.
/c:path Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.
/r:n Never restarts the system after installation.
/r:I Prompts the user to restart the system if a restart is required, except when used with /q:a.
/r:a Always restarts the system after installation.
/r:s Restarts the system after installation without prompting the user.
/n:v No version checking - Install the program over any earlier version.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

To remove this security update, use the Add or Remove Programs tool in Control Panel. Note When you remove this update, you may be prompted to insert the Microsoft Office XP CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.

Verifying That the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the “Microsoft Baseline Security Analyzer” heading under the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several versions and editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.
      Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.
      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Word 2003 and Word 2003 Viewer (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service Packs There are no more service packs planned for this software. The update for this issue may be included in a future update rollup.
Deployment
Installing without user intervention For Word 2003:\ office2003-kb950241-fullfile-enu.exe /q:a\ \ For Word Viewer 2003:\ office2003-kb950625-fullfile-enu.exe /q:a
Installing without restarting For Word 2003:\ office2003-kb950241-fullfile-enu.exe /r:n\ \ For Word Viewer 2003:\ office2003-kb950625-fullfile-enu.exe /r:n
Update log file Not applicable
Further information For detection and deployment, see the earlier section, Detection and Deployment Tools and Guidance.\ \ For features you can selectively install, see the Office Features for Administrative Installations subsection in this section.
Restart Requirement
Restart required? This update does not require a restart.
Hotpatching Not applicable
Removal Information Use Add or Remove Programs tool in Control Panel.Note When you remove this update, you may be prompted to insert the Microsoft Office 2003 CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.
File Information See Microsoft Knowledge Base Article 951207
Registry Key Verification Not applicable

Office Features

The following table contains the list of feature names (case sensitive) that must be reinstalled for the update. To install all features, you can use REINSTALL=ALL or you can install the following features:

Product Feature
BASIC11, PERS11, PRO11SB, PROI11, PRO11, STDP11, STD11, WORD11 WORDFiles
Word Viewer 2003 WORDVIEWFiles

Note Administrators working in managed environments can find complete resources for deploying Office updates in an organization at the Office Admin Update Center. At that site, scroll down and look under the Update Resources section for the software version you are updating. The Windows Installer Documentation also provides more information about the parameters supported by Windows Installer.

Deployment Information

Installing the Update

You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

This security update requires that Windows Installer 2.0 or later be installed on the system. All supported versions of Windows include Windows Installer 2.0 or a later version.

To install the latest version of Windows Installer, visit one of the following Microsoft Web sites:

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches

Switch Description
/q Specifies quiet mode, or suppresses prompts, when files are being extracted.
/q:u Specifies user-quiet mode, which presents some dialog boxes to the user.
/q:a Specifies administrator-quiet mode, which does not present any dialog boxes to the user.
/t:path Specifies the target folder for extracting files.
/c Extracts the files without installing them. If /t:path is not specified, you are prompted for a target folder.
/c:path Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.
/r:n Never restarts the system after installation.
/r:I Prompts the user to restart the system if a restart is required, except when used with /q:a.
/r:a Always restarts the system after installation.
/r:s Restarts the system after installation without prompting the user.
/n:v No version checking - Install the program over any earlier version.

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

To remove this security update, use the Add or Remove Programs tool in Control Panel.

Note When you remove this update, you may be prompted to insert the Microsoft Office 2003 CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the “Microsoft Baseline Security Analyzer” heading under the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several versions and editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.
      Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.
      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Word 2007 and Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service Packs There are no more service packs planned for this software. The update for this issue may be included in a future update rollup.
Deployment
Installing without user intervention For Word 2007:\ office2007-kb950113-fullfile-x86-glb /passive\ \ For Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats:\ office2007-kb951808-fullfile-x86-glb /passive
Installing without restarting For Word 2007:\ office2007-kb950113-fullfile-x86-glb /norestart\ \ For Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats:\ office2007-kb951808-fullfile-x86-glb /norestart
Update log file Not applicable
Further information For detection and deployment, see the earlier section, Detection and Deployment Tools and Guidance.\ \ For features you can selectively install, see the Office Features for Administrative Installations subsection in this section.
Restart Requirement
Restart required? This update does not require a restart.
Hotpatching Not applicable
Removal Information Use Add or Remove Programs tool in Control Panel.
File Information See Microsoft Knowledge Base Article 951207
Registry Key Verification Not applicable

Deployment Information

Installing the Update

You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

This security update requires that Windows Installer 2.0 or later be installed on the system. All supported versions of Windows include Windows Installer 2.0 or a later version.

To install the latest version of Windows Installer, visit the following Microsoft Web site:

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Supported Security Update Installation Switches

Switch Description
/? or /help Displays usage dialog.
/passive Specifies passive mode. Requires no user interaction; users see basic progress dialogs but cannot cancel.
/quiet Specifies quiet mode, or suppresses prompts, when files are being extracted.
/norestart Suppresses restarting the system if the update requires a restart.
/forcerestart Automatically restarts the system after applying the update, regardless of whether the update requires the restart.
/extract Extracts the files without installing them. You are prompted for a target folder.
/extract:<path> Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.
/lang:<LCID> Forces the use of a specific language, when the update package supports that language.
/log:<log file> Enables logging, by both Vnox and Installer, during the update installation.

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

To remove this security update, use the Add or Remove Programs tool in Control Panel.

Note When you remove this update, you may be prompted to insert the 2007 Microsoft Office CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the “Microsoft baseline Security Analyzer” heading under the section, Microsoft Detection and Deployment Tools and Guidance.

  • File Version Verification

    Note Because there are several versions and editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.
      Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.
      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Office 2004 for Mac

Deployment Information

Prerequisites

  • Mac OS X version 10.2.8 or later on a G3, Mac OS X-compatible processor or higher.
  • Mac OS X user accounts must have administrator privileges to install this security update.

Installing the Update

Download and install the appropriate language version of the Microsoft Office 2004 for Mac 11.4.2 Update from the Microsoft Download Center.

  • Quit any applications that are running, including virus-protection applications, all Microsoft Office applications, Microsoft Messenger for Mac, and Office Notifications, because they might interfere with installation.
  • Open the Microsoft Office 2004 for Mac 11.4.2 Update volume on your desktop. This step might have been performed for you.
  • To start the update process, in the Microsoft Office 2004 for Mac 11.4.2 Update volume window, double-click the Microsoft Office 2004 for Mac 11.4.2 Update application, and follow the instructions on the screen.
  • If the installation finishes successfully, you can remove the update installer from your hard disk. To verify that the installation finished successfully, see the following “Verifying Update Installation” heading. To remove the update installer, first drag the Microsoft Office 2004 for Mac 11.4.2 Update volume to the Trash, and then drag the file that you downloaded to the Trash.

Verifying Update Installation

To verify that a security update is installed on an affected system, follow these steps:

  1. In the Finder, navigate to the Application Folder (Microsoft Office 2004: Office).
  2. Select the file, Microsoft Component Plugin.
  3. On the File menu, click Get Info or Show Info.

If the Version number is 11.4.2, the update has been successfully installed.

Restart Requirement

This update does not require you to restart your computer.

Removing the Update

This security update cannot be uninstalled.

Additional Information

If you have technical questions or problems downloading or using this update, visit Microsoft for Mac Supportto learn about the support options that are available to you.

Office 2008 for Mac

Deployment Information

Prerequisites

  • Mac OS X version 10.4.9 or later on an Intel, PowerPC G5, or PowerPC G4 (500 MHz or faster) processor.
  • Mac OS X user accounts must have administrator privileges to install this security update.

Installing the Update

Download and install the appropriate language version of the Microsoft Office 2008 for Mac Service Pack 1 from the Microsoft Download Center.

  • Quit any applications that are running, including virus-protection applications, all Microsoft Office applications, Microsoft Messenger for Mac, and Office Notifications, because they might interfere with installation.
  • Open the Microsoft Office 2008 for Mac Service Pack 1 volume on your desktop. This step might have been performed for you.
  • To start the update process, in the Microsoft Office 2008 for Mac Service Pack 1 volume window, double-click the Microsoft Office 2008 for Mac Service Pack 1, and follow the instructions on the screen.
  • If the installation finishes successfully, you can remove the update installer from your hard disk. To verify that the installation finished successfully, see the following “Verifying Update Installation” heading. To remove the update installer, first drag the Microsoft Office 2008 for Mac Service Pack 1 volume to the Trash, and then drag the file that you downloaded to the Trash.

Verifying Update Installation

To verify that a security update is installed on an affected system, follow these steps:

  1. In the Finder, navigate to the Application Folder (Microsoft Office 2008: Office).
  2. Select the file, Microsoft Component Plugin.
  3. On the File menu, click Get Info or Show Info.

If the Version number is 12.1.0, the update has been successfully installed.

Restart Requirement

This update does not require you to restart your computer.

Removing the Update

This security update cannot be uninstalled.

Additional Information

If you have technical questions or problems downloading or using this update, visit Microsoft for Mac Supportto learn about the support options that are available to you.

Other Information

Acknowledgments

Microsoft thanks the following for working with us to help protect customers:

  • Jun Mao, working with iDefense Labs, for reporting the Word Cascading Style Sheet (CSS) Vulnerability - CVE-2008-1434.
  • wushi of team509, working with Zero Day Initiative, for reporting the Object Parsing Vulnerability - CVE-2008-1091.

Support

  • Customers in the U.S. and Canada can receive technical support from Microsoft Product Support Services at 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates.
  • International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

Disclaimer

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions

  • V1.0 (May 13, 2008): Bulletin published.
  • V1.1 (May 14, 2008): Updated the Deployment Information sections for Office 2004 for Mac and Office 2008 for Mac to link to the Microsoft Download Center. Also added entry to Update FAQ to clarify why the update for Outlook 2007 is rated Critical.

Built at 2014-04-18T13:49:36Z-07:00