Security Bulletin

Microsoft Security Bulletin MS12-012 - Important

Vulnerability in Color Control Panel Could Allow Remote Code Execution (2643719)

Published: February 14, 2012

Version: 1.0

General Information

Executive Summary

This security update resolves one publicly disclosed vulnerability in Microsoft Windows. The vulnerability could allow remote code execution if a user opens a legitimate file (such as an .icm or .icc file) that is located in the same directory as a specially crafted dynamic link library (DLL) file. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

This security update is rated Important for all supported editions of Windows Server 2008 and Windows Server 2008 R2. For more information, see the subsection, Affected and Non-Affected Software, in this section.

The security update addresses the vulnerability by correcting the manner in which the Color Control Panel loads external libraries. For more information about the vulnerability, see the Frequently Asked Questions (FAQ) subsection for the specific vulnerability entry under the next section, Vulnerability Information.

Recommendation. The majority of customers have automatic updating enabled and will not need to take any action because this security update will be downloaded and installed automatically. Customers who have not enabled automatic updating need to check for updates and install this update manually. For information about specific configuration options in automatic updating, see Microsoft Knowledge Base Article 294871.

For administrators and enterprise installations, or end users who want to install this security update manually, Microsoft recommends that customers apply the update at the earliest opportunity using update management software, or by checking for updates using the Microsoft Update service.

See also the section, Detection and Deployment Tools and Guidance, later in this bulletin.

Known Issues. None

Affected and Non-Affected Software

The following software have been tested to determine which versions or editions are affected. Other versions or editions are either past their support life cycle or are not affected. To determine the support life cycle for your software version or edition, visit Microsoft Support Lifecycle.

Affected Software

Operating System Maximum Security Impact Aggregate Severity Rating Bulletins Replaced by this Update
Windows Server 2008 for 32-bit Systems Service Pack 2** Remote Code Execution Important None
Windows Server 2008 for x64-based Systems Service Pack 2** Remote Code Execution Important None
Windows Server 2008 for Itanium-based Systems Service Pack 2 Remote Code Execution Important None
Windows Server 2008 R2 for x64-based Systems and Windows Server 2008 R2 for x64-based Systems Service Pack 1** Remote Code Execution Important None
Windows Server 2008 R2 for Itanium-based Systems and Windows Server 2008 R2 for Itanium-based Systems Service Pack 1 Remote Code Execution Important None

**Server Core installation not affected. The vulnerabilities addressed by this update do not affect supported editions of Windows Server 2008 or Windows Server 2008 R2 as indicated, when installed using the Server Core installation option. For more information on this installation option, see the TechNet articles, Managing a Server Core Installation and Servicing a Server Core Installation. Note that the Server Core installation option does not apply to certain editions of Windows Server 2008 and Windows Server 2008 R2; see Compare Server Core Installation Options.

Non-Affected Software

Operating System
Windows XP Service Pack 3
Windows XP Professional x64 Edition Service Pack 2
Windows Server 2003 Service Pack 2
Windows Server 2003 x64 Edition Service Pack 2
Windows Server 2003 with SP2 for Itanium-based Systems
Windows Vista Service Pack 2
Windows Vista x64 Edition Service Pack 2
Windows 7 for 32-bit Systems and Windows 7 for 32-bit Systems Service Pack 1
Windows 7 for x64-based Systems and Windows 7 for x64-based Systems Service Pack 1

Where are the file information details?
Refer to the reference tables in the Security Update Deployment section for the location of the file information details.

Is this update related to Microsoft Security Advisory 2269637?
Yes, the Color Control Panel Insecure Library Loading Vulnerability (CVE-2010-5082) addressed by this update is related to the class of vulnerabilities, described in Microsoft Security Advisory 2269637, that affects how applications load external libraries. This security update addresses a particular instance of this type of vulnerability.

I am using an older release of the software discussed in this security bulletin. What should I do?
The affected software listed in this bulletin have been tested to determine which releases are affected. Other releases are past their support life cycle. For more information about the product lifecycle, visit the Microsoft Support Lifecycle website.

It should be a priority for customers who have older releases of the software to migrate to supported releases to prevent potential exposure to vulnerabilities. To determine the support lifecycle for your software release, see Select a Product for Lifecycle Information. For more information about service packs for these software releases, see Service Pack Lifecycle Support Policy.

Customers who require custom support for older software must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information website, select the country in the Contact Information list, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Microsoft Support Lifecycle Policy FAQ.

Vulnerability Information

Severity Ratings and Vulnerability Identifiers

The following severity ratings assume the potential maximum impact of the vulnerability. For information regarding the likelihood, within 30 days of this security bulletin's release, of the exploitability of the vulnerability in relation to its severity rating and security impact, please see the Exploitability Index in the February bulletin summary. For more information, see Microsoft Exploitability Index.

Affected Software Color Control Panel Insecure Library Loading Vulnerability - CVE-2010-5082 Aggregate Severity Rating
Windows Server 2008 for 32-bit Systems Service Pack 2** Important \ Remote Code Execution Important
Windows Server 2008 for x64-based Systems Service Pack 2** Important \ Remote Code Execution Important
Windows Server 2008 for Itanium-based Systems Service Pack 2 Important \ Remote Code Execution Important
Windows Server 2008 R2 for x64-based Systems and Windows Server 2008 R2 for x64-based Systems Service Pack 1** Important \ Remote Code Execution Important
Windows Server 2008 R2 for Itanium-based Systems and Windows Server 2008 R2 for Itanium-based Systems Service Pack 1 Important \ Remote Code Execution Important

**Server Core installation not affected. The vulnerabilities addressed by this update do not affect supported editions of Windows Server 2008 or Windows Server 2008 R2 as indicated, when installed using the Server Core installation option. For more information on this installation option, see the TechNet articles, Managing a Server Core Installation and Servicing a Server Core Installation. Note that the Server Core installation option does not apply to certain editions of Windows Server 2008 and Windows Server 2008 R2; see Compare Server Core Installation Options.

Color Control Panel Insecure Library Loading Vulnerability - CVE-2010-5082

A remote code execution vulnerability exists in the way that the Color Control Panel handles the loading of DLL files. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2010-5082.

Mitigating Factors for Color Control Panel Insecure Library Loading Vulnerability - CVE-2010-5082

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • For an attack to be successful, a user must visit an untrusted remote file system location or WebDAV share and open a legitimate file (such as a .icm or .icc file).
  • The file sharing protocol, Server Message Block (SMB), is often disabled on the perimeter firewall. This limits the potential attack vectors for this vulnerability.
  • An attacker who successfully exploited this vulnerability could gain the same user rights as the logged-on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

Workarounds for Color Control Panel Insecure Library Loading Vulnerability - CVE-2010-5082

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:

  • Install Desktop Experience on Windows server 2008 and Windows Server 2008 R2

    Systems with the Desktop Experience feature installed are not affected by this vulnerability.

    For additional information, including instructions on how to install and remove the Desktop Experience, see TechNet article, Desktop Experience Overview.

  • Disable loading of libraries from WebDAV and remote network shares

    Note See Microsoft Knowledge Base Article 2264107 to deploy a workaround tool that allows customers to disable the loading of libraries from remote network or WebDAV shares. This tool can be configured to disallow insecure loading on a per-application or a global system basis.

    Customers who are informed by their vendor of an application being vulnerable can use this tool to help protect against attempts to exploit this issue.

    Note See Microsoft Knowledge Base Article 2264107 to use the automated Microsoft Fix it solution to deploy the registry key to block the loading of libraries for SMB and WebDAV shares. Note that this Fix it solution does require you to install the workaround tool also described in Microsoft Knowledge Base Article 2264107 first. This Fix it solution only deploys the registry key and requires the workaround tool in order to be effective. We recommend that administrators review the KB article closely prior to deploying this Fix it solution.

  • Disable the WebClient service

    Disabling the WebClient service helps protect affected systems from attempts to exploit this vulnerability by blocking the most likely remote attack vector through the Web Distributed Authoring and Versioning (WebDAV) client service. After applying this workaround it is still possible for remote attackers who successfully exploit this vulnerability to cause the system to run programs located on the targeted user's computer or the Local Area Network (LAN), but users will be prompted for confirmation before opening arbitrary programs from the Internet.

    To disable the WebClient Service, follow these steps:

    1. Click Start, click Run, type Services.msc and then click OK.
    2. Right-click WebClient service and select Properties.
    3. Change the Startup type to Disabled. If the service is running, click Stop.
    4. Click OK and exit the management application.

    Impact of workaround. When the WebClient service is disabled, Web Distributed Authoring and Versioning (WebDAV) requests are not transmitted. In addition, any services that explicitly depend on the Web Client service will not start, and an error message will be logged in the System log. For example, WebDAV shares will be inaccessible from the client computer.

    How to undo the workaround.

    To re-enable the WebClient Service, follow these steps:

    1. Click Start, click Run, type Services.msc and then click OK.
    2. Right-click WebClient service and select Properties.
    3. Change the Startup type to Automatic. If the service is not running, click Start.
    4. Click OK and exit the management application.
  • Block TCP ports 139 and 445 at the firewall

    These ports are used to initiate a connection with the affected component. Blocking TCP ports 139 and 445 at the firewall will help protect systems that are behind that firewall from attempts to exploit this vulnerability. Microsoft recommends that you block all unsolicited inbound communication from the Internet to help prevent attacks that may use other ports. For more information about ports, see the TechNet article, TCP and UDP Port Assignments.

    Impact of workaround. Several Windows services use the affected ports. Blocking connectivity to the ports may cause various applications or services to not function. Some of the applications or services that could be impacted are listed below:

    • Applications that use SMB (CIFS)
    • Applications that use mailslots or named pipes (RPC over SMB)
    • Server (File and Print Sharing)
    • Group Policy
    • Net Logon
    • Distributed File System (DFS)
    • Terminal Server Licensing
    • Print Spooler
    • Computer Browser
    • Remote Procedure Call Locator
    • Fax Service
    • Indexing Service
    • Performance Logs and Alerts
    • Systems Management Server
    • License Logging Service

    How to undo the workaround. Unblock TCP ports 139 and 445 at the firewall. For more information about ports, see TCP and UDP Port Assignments.

FAQ for Color Control Panel Insecure Library Loading Vulnerability - CVE-2010-5082

What is the scope of the vulnerability? 
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

What causes the vulnerability? 
The vulnerability is the result of the Color Control Panel improperly restricting the path used when loading external libraries.

What is the Desktop Experience feature in Windows Server 2008? 
There are a number of desktop features, such as the Color Control Panel, that are not installed by default on Windows Server 2008. Instead, you can install them all together by installing the Desktop Experience feature on Windows Server 2008. For more information, see the TechNet article, Desktop Experience Overview.

What might an attacker use the vulnerability to do? 
An attacker who successfully exploited this vulnerability could run arbitrary code as the logged-on user. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. If a user is logged on with administrative user rights, an attacker could take complete control of the affected system. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

How could an attacker exploit the vulnerability? 
An attacker could convince a user to open a legitimate file (such as a .icm or .icc file) that is located in the same network directory as a specially crafted dynamic link library (DLL) file. Then, while opening the legitimate file, the Color Control Panel could attempt to load the DLL file and execute any code it contained.

In an email attack scenario, an attacker could exploit the vulnerability by sending a legitimate file to a user (such as a .icm or .icc file), and convincing the user to place the attachment into a directory containing a specially crafted DLL file and to open the legitimate file. Then, while opening the legitimate file, the Color Control Panel could attempt to load the DLL file and execute any code it contained.

In a network attack scenario, an attacker could place a legitimate file (such as a .icm or .icc file) and a specially crafted DLL file in a network share, a UNC, or WebDAV location and then convince the user to open the file.

What systems are primarily at risk from the vulnerability? 
Servers, where users may be expected to open files from untrusted network locations, are primarily at risk.

What does the update do? 
The update addresses this vulnerability by correcting the manner in which the Color Control Panel loads external libraries.

Is this vulnerability related to Microsoft Security Advisory 2269637? 
Yes, this vulnerability is related to the class of vulnerabilities, described in Microsoft Security Advisory 2269637, that affects how applications load external libraries. This security update addresses a particular instance of this type of vulnerability.

When this security bulletin was issued, had this vulnerability been publicly disclosed? 
Yes. This vulnerability has been publicly disclosed. It has been assigned Common Vulnerability and Exposure number CVE-2010-5082.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited? 
No. Microsoft had seen examples of proof of concept code published publicly but had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.

Update Information

Detection and Deployment Tools and Guidance

Security Central

Manage the software and security updates you need to deploy to the servers, desktop, and mobile systems in your organization. For more information see the TechNet Update Management Center. The Microsoft TechNet Security website provides additional information about security in Microsoft products.

Security updates are available from Microsoft Update and Windows Update. Security updates are also available from the Microsoft Download Center. You can find them most easily by doing a keyword search for "security update."

Finally, security updates can be downloaded from the Microsoft Update Catalog. The Microsoft Update Catalog provides a searchable catalog of content made available through Windows Update and Microsoft Update, including security updates, drivers and service packs. By searching using the security bulletin number (such as, "MS07-036"), you can add all of the applicable updates to your basket (including different languages for an update), and download to the folder of your choosing. For more information about the Microsoft Update Catalog, see the Microsoft Update Catalog FAQ.

Detection and Deployment Guidance

Microsoft provides detection and deployment guidance for security updates. This guidance contains recommendations and information that can help IT professionals understand how to use various tools for detection and deployment of security updates. For more information, see Microsoft Knowledge Base Article 961747.

Microsoft Baseline Security Analyzer

Microsoft Baseline Security Analyzer (MBSA) allows administrators to scan local and remote systems for missing security updates as well as common security misconfigurations. For more information about MBSA, visit Microsoft Baseline Security Analyzer.

The following table provides the MBSA detection summary for this security update.

Software MBSA
Windows Server 2008 for 32-bit Systems Service Pack 2 Yes
Windows Server 2008 for x64-based Systems Service Pack 2 Yes
Windows Server 2008 for Itanium-based Systems Service Pack 2 Yes
Windows Server 2008 R2 for x64-based Systems and Windows Server 2008 R2 for x64-based Systems Service Pack 1 Yes
Windows Server 2008 R2 for Itanium-based Systems and Windows Server 2008 R2 for Itanium-based Systems Service Pack 1 Yes

Note For customers using legacy software not supported by the latest release of MBSA, Microsoft Update, and Windows Server Update Services, please visit Microsoft Baseline Security Analyzer and reference the Legacy Product Support section on how to create comprehensive security update detection with legacy tools.

Windows Server Update Services

Windows Server Update Services (WSUS) enables information technology administrators to deploy the latest Microsoft product updates to computers that are running the Windows operating system. For more information about how to deploy security updates using Windows Server Update Services, see the TechNet article, Windows Server Update Services.

Systems Management Server

The following table provides the SMS detection and deployment summary for this security update.

Software SMS 2003 with ITMU Configuration Manager 2007
Windows Server 2008 for 32-bit Systems Service Pack 2 Yes Yes
Windows Server 2008 for x64-based Systems Service Pack 2 Yes Yes
Windows Server 2008 for Itanium-based Systems Service Pack 2 Yes Yes
Windows Server 2008 R2 for x64-based Systems and Windows Server 2008 R2 for x64-based Systems Service Pack 1 Yes Yes
Windows Server 2008 R2 for Itanium-based Systems and Windows Server 2008 R2 for Itanium-based Systems Service Pack 1 Yes Yes

Note Microsoft discontinued support for SMS 2.0 on April 12, 2011. For SMS 2003, Microsoft also discontinued support for the Security Update Inventory Tool (SUIT) on April 12, 2011. Customers are encouraged to upgrade to System Center Configuration Manager 2007. For customers remaining on SMS 2003 Service Pack 3, the Inventory Tool for Microsoft Updates (ITMU) is also an option.

For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates (ITMU) can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 ITMU, see SMS 2003 Inventory Tool for Microsoft Updates. For more information about SMS scanning tools, see SMS 2003 Software Update Scanning Tools. See also Downloads for Systems Management Server 2003.

System Center Configuration Manager 2007 uses WSUS 3.0 for detection of updates. For more information about Configuration Manager 2007 Software Update Management, visit System Center Configuration Manager 2007.

For more information about SMS, visit the SMS website.

For more detailed information, see Microsoft Knowledge Base Article 910723: Summary list of monthly detection and deployment guidance articles.

Update Compatibility Evaluator and Application Compatibility Toolkit

Updates often write to the same files and registry settings required for your applications to run. This can trigger incompatibilities and increase the time it takes to deploy security updates. You can streamline testing and validating Windows updates against installed applications with the Update Compatibility Evaluator components included with Application Compatibility Toolkit.

The Application Compatibility Toolkit (ACT) contains the necessary tools and documentation to evaluate and mitigate application compatibility issues before deploying Microsoft Windows Vista, a Windows Update, a Microsoft Security Update, or a new version of Windows Internet Explorer in your environment.

Security Update Deployment

Affected Software

For information about the specific security update for your affected software, click the appropriate link:

Windows Server 2008 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service Packs The update for this issue will be included in a future service pack or update rollup
Deployment  
Installing without user intervention For all supported 32-bit editions of Windows Server 2008:\ Windows6.0-KB2643719-x86.msu /quiet
For all supported x64-based editions of Windows Server 2008:\ Windows6.0-KB2643719-x64.msu /quiet
For all supported Itanium-based editions of Windows Server 2008:\ Windows6.0-KB2643719-ia64.msu /quiet
Installing without restarting For all supported 32-bit editions of Windows Server 2008:\ Windows6.0-KB2643719-x86.msu /quiet /norestart
For all supported x64-based editions of Windows Server 2008:\ Windows6.0-KB2643719-x64.msu /quiet /norestart
For all supported Itanium-based editions of Windows Server 2008:\ Windows6.0-KB2643719-ia64.msu /quiet /norestart
Further information See the subsection, Detection and Deployment Tools and Guidance
Restart Requirement  
Restart required? This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.
HotPatching Not applicable.
Removal Information WUSA.exe does not support uninstall of updates. To uninstall an update installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates and select from the list of updates.
File Information See Microsoft Knowledge Base Article 2643719
Registry Key Verification Note A registry key does not exist to validate the presence of this update.

Deployment Information

Installing the Update

When you install this security update, the installer checks whether one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Switch Description
/?, /h, /help Displays help on supported switches.
/quiet Suppresses the display of status or error messages.
/norestart When combined with /quiet, the system will not be restarted after installation even if a restart is required to complete installation.

Note For more information about the wusa.exe installer, see Microsoft Knowledge Base Article 934307.

Verifying That the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start and then enter an update file name in the Start Search box.
    2. When the file appears under Programs, right-click the file name and click Properties.
    3. On the General tab, compare the file size with the file information tables provided in the bulletin KB article.
      Note Depending on the edition of the operating system, or the programs that are installed on your system, some of the files that are listed in the file information table may not be installed.
    4. You can also click the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.
      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
    5. Finally, you can also click the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

Windows Server 2008 R2 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service Packs The update for this issue will be included in a future service pack or update rollup
Deployment  
Installing without user intervention For all supported x64-based editions of Windows Server 2008 R2:\ Windows6.1-KB2643719-x64.msu /quiet
For all supported Itanium-based editions of Windows Server 2008 R2:\ Windows6.1-KB2643719-ia64.msu /quiet
Installing without restarting For all supported x64-based editions of Windows Server 2008 R2:\ Windows6.1-KB2643719-x64.msu /quiet /norestart
For all supported Itanium-based editions of Windows Server 2008 R2:\ Windows6.1-KB2643719-ia64.msu /quiet /norestart
Further information See the subsection, Detection and Deployment Tools and Guidance
Restart Requirement  
Restart required? This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.
HotPatching Not applicable.
Removal Information To uninstall an update installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, and then under Windows Update, click View installed updates and select from the list of updates.
File Information See Microsoft Knowledge Base Article 2643719
Registry Key Verification Note A registry key does not exist to validate the presence of this update.

Deployment Information

Installing the Update

When you install this security update, the installer checks whether one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Switch Description
/?, /h, /help Displays help on supported switches.
/quiet Suppresses the display of status or error messages.
/norestart When combined with /quiet, the system will not be restarted after installation even if a restart is required to complete installation.
/warnrestart:<seconds> When combined with /quiet, the installer will warn the user before initiating restart.
/promptrestart When combined with /quiet, the installer will prompt before initiating restart.
/forcerestart When combined with /quiet, the installer will forcefully close applications and initiate restart.
/log:<file name> Enables logging to specified file.
/extract:<destination> Extracts the package contents to the destination folder.
/uninstall /kb:<KB Number> Uninstalls the security update.

Note For more information about the wusa.exe installer, see "Windows Update Stand-alone Installer" in the TechNet article, Miscellaneous Changes in Windows 7.

Verifying That the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification

    Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start and then enter an update file name in the Start Search box.
    2. When the file appears under Programs, right-click the file name and click Properties.
    3. On the General tab, compare the file size with the file information tables provided in the bulletin KB article.
      Note Depending on the edition of the operating system, or the programs that are installed on your system, some of the files that are listed in the file information table may not be installed.
    4. You can also click the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.
      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
    5. Finally, you can also click the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

Other Information

Microsoft Active Protections Program (MAPP)

To improve security protections for customers, Microsoft provides vulnerability information to major security software providers in advance of each monthly security update release. Security software providers can then use this vulnerability information to provide updated protections to customers via their security software or devices, such as antivirus, network-based intrusion detection systems, or host-based intrusion prevention systems. To determine whether active protections are available from security software providers, please visit the active protections websites provided by program partners, listed in Microsoft Active Protections Program (MAPP) Partners.

Support

  • Customers in the U.S. and Canada can receive technical support from Security Support or 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates. For more information about available support options, see Microsoft Help and Support.
  • International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support website.

Disclaimer

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions

  • V1.0 (February 14, 2012): Bulletin published.

Built at 2014-04-18T13:49:36Z-07:00