STEP 9 Configure EDGE1

Applies to: Windows Server 2022, Windows Server 2019, Windows Server 2016

The following procedures are performed on the EDGE1 server:

  1. Configure the DNS servers on EDGE1. It is necessary to configure the DNS server from the corp2.corp.contoso.com domain on EDGE1.

  2. Configure routing between subnets. Configure routing on EDGE1 to enable communication between the Corpnet and 2-Corpnet subnets.

Configure the DNS servers on EDGE1

  1. In the Server Manager console, click Local Server, and then in the Properties area, next to Corpnet, click the link.

  2. In the Network Connections window, right-click Corpnet, and then click Properties.

  3. Click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.

  4. In Alternate DNS server, type 10.2.0.1. and then click OK.

  5. Click Internet Protocol Version 6 (TCP/IPv6), and then click Properties.

  6. In Alternate DNS server, type 2001:db8:2::1 and then click OK.

  7. On the Corpnet Properties dialog box, click Close.

  8. Close the Network Connections window.

Configure routing between subnets

  1. On the Start screen, typecmd.exe, right-click cmd, click Advanced, and then click Run as administrator. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Yes.

  2. In the Command Prompt window, enter the following commands. After entering each command, press ENTER.

    netsh interface IPv4 add route 10.2.0.0/24 Corpnet 10.0.0.254
    netsh interface IPv6 add route 2001:db8:2::/64 Corpnet 2001:db8:1::fe
    
  3. Close the Command Prompt window.