Extending volumes in Storage Spaces Direct
Applies To: Windows Server 2016
This topic provides instructions for resizing volumes in Storage Spaces Direct.
Capacity in the storage pool
Before you resize a volume, make sure you have enough capacity in the storage pool to accommodate its new, larger footprint. For example, when resizing a three-way mirror volume from 1 TB to 2 TB, its footprint would grow from 3 TB to 6 TB. For the resize to succeed, you would need at least (6 - 3) = 3 TB of available capacity in the storage pool.
Familiarity with volumes in Storage Spaces
In Storage Spaces Direct, every volume is comprised of several stacked objects: the cluster shared volume (CSV), which is a volume; the partition; the disk, which is a virtual disk; and one or more storage tiers (if applicable). To resize a volume, you will need to resize several of these objects.
To familiarize yourself with them, try running Get- with the corresponding noun in PowerShell.
To follow associations between objects in the stack, pipe one Get- cmdlet into the next.
For example, here's how to get from a virtual disk up to its volume:
Get-VirtualDisk <FriendlyName> | Get-Disk | Get-Partition | Get-Volume
Before you begin, we recommend temporarily suspending all IO to the volume.
Stop your workloads and then run:
Get-ClusterSharedVolume <Name> | Suspend-ClusterResource
Step 1 – Resize the virtual disk
The virtual disk may use storage tiers, or not, depending on how it was created.
To check, run the following cmdlet:
Get-VirtualDisk <FriendlyName> | Get-StorageTier
If the cmdlet returns nothing, the virtual disk doesn't use storage tiers.
No storage tiers
If the virtual disk has no storage tiers, you can resize it directly using the Resize-VirtualDisk cmdlet.
Provide the new size in the -Size parameter.
Get-VirtualDisk <FriendlyName> | Resize-VirtualDisk -Size <Size>
When you resize the VirtualDisk, the Disk follows automatically and is resized too.
With storage tiers
If the virtual disk uses storage tiers, you can resize each tier separately using the Resize-StorageTier cmdlet.
Get the names of the storage tiers by following the associations from the virtual disk.
Get-VirtualDisk <FriendlyName> | Get-StorageTier | Select FriendlyName
Then, for each tier, provide the new size in the -Size parameter.
Get-StorageTier <FriendlyName> | Resize-StorageTier -Size <Size>
If your tiers are different physical media types (such as MediaType = SSD and MediaType = HDD) you need to ensure you have enough capacity of each media type in the storage pool to accommodate the new, larger footprint of each tier.
When you resize the StorageTier(s), the VirtualDisk and Disk follow automatically and are resized too.
Step 2 – Resize the partition
Next, resize the partition using the Resize-Partition cmdlet. The virtual disk is expected to have two partitions: the first is Reserved and should not be modified; the one you need to resize has PartitionNumber = 2 and Type = Basic.
Provide the new size in the -Size parameter. We recommend using the maximum supported size, as shown below.
# Choose virtual disk $VirtualDisk = Get-VirtualDisk <FriendlyName> # Get its partition $Partition = $VirtualDisk | Get-Disk | Get-Partition | Where PartitionNumber -Eq 2 # Resize to its maximum supported size $Partition | Resize-Partition -Size ($Partition | Get-PartitionSupportedSize).SizeMax
When you resize the Partition, the Volume and ClusterSharedVolume follow automatically and are resized too.
You can verify the volume has the new size by running Get-Volume.
Last, don't forget to allow IO to the volume to resume, and then resume your workloads.
Get-ClusterSharedVolume <Name> | Resume-ClusterResource