Share via


Netdom Syntax

Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2

NetDom Syntax

NetDom uses the following general syntaxes:

Art ImageNetDom Operation [Computer] [{/d: | /domain:}Domain] [Options]

Art ImageNetDom help Operation

NetDom add

Adds a workstation or server account to the domain.

Syntax

Art ImageNetDom add Computer {/d: | /domain:}Domain [{/ud: | /userd:}[Domain\]User {/pd: | /passwordd:}{Password|*}] [{/s: | /server:}Server] [/ou:OUPath] [/dc] [/help | /?]

Parameters

  • Computer
    Specifies the name of the computer to be added.
  • {/d: | /domain:} Domain
    Specifies the domain in which to create the account. If this parameter is omitted, then the domain that the current computer belongs to is used.
  • {/ud: | /userd:}[ Domain\] User
    Specifies the user account that makes the connection with the domain that is specified in the /d or /domain parameter. If this parameter is omitted, the current user account is used.
  • {/pd: | /passwordd:}{ Password|*}
    Specifies the password of the user account that is specified in the /ud or /userd parameter. Use the wildcard character (*) to be prompted for the password.
  • {/s: | /server:} Server
    Specifies the name of a domain controller that performs the add.
  • /ou: OUPath
    Specifies the organizational unit (OU) under which to create the account. This must be the full RFC 1779 distinguished name of the OU. If omitted, the account is created under the default OU for machine objects for that domain.
  • /dc
    Specifies that a domain controller's machine account is to be created. This allows the computer accounts for new Windows 2000, Windows Server 2003 domain controllers, and new Windows NT 4.0 backup domain controllers (BDCs) to be pre-created. If installing a new Windows NT 4.0 BDC into an existing Windows 2000 or Windows Server 2003 domain, the computer account must be pre-created. This parameter cannot be used with the /ou parameter.
  • {/help | /?}
    Displays command-line help for the add operation.

Sample Usage

netdom add /d:reskit.ms.com mywksta

netdom add /d:reskit.ms.com mynt4dc /dc

NetDom computername

Manages the primary and alternate names for a computer. This command can safely rename Windows Server 2003 and Windows 2000 domain controllers as well as member servers.

Syntax

Art ImageNetDom computername Computer [usero:User [/passwordo:[Password|*]] [userd:User [/passwordd:[Password|*]] {**/add:**NewAltDNSName | /remove:AltDNSName | /makeprimary:ComputerDNSName | /enumerate[:{ALTERNATENAMES | PRIMARYNAME | ALLNAMES}] | /verify | {/help | /?}}

Parameters

  • Computer
    Specifies the name of the computer to be added.
  • ****/usero:[domain\]UserName
    Specifies the user account to be used for the originating domain.
  • ****/passwordo:[Password | *]
    Specifies the password to be used for the originating domain. If the wildcard character (*) is used, then the user will be prompted for the password.
  • ****/userd:[Domain\]UserName
    Specifies the user account to be used for the destination domain.
  • ****/passwordd:[Password | *]
    Specifies the password to be used for the destination domain. If the wildcard character (*) is used, then the user will be prompted for the password.
  • ****/add:NewAltDNSName
    Specifies that a new alternate name should be created. The name must be a fully qualified domain name (computer name followed by primary DNS suffix, such as comp1.example.com).
  • ****/remove:AltDNSName
    Specifies that an existing alternate name should be deleted. The name must be a fully qualified domain name (computer name followed by primary DNS suffix, such as comp1.example.com).
  • ****/makeprimary:ComputerDNSName
    Specifies that an existing alternate name should be made into the primary name. The name must be a fully qualified domain name (computer name followed by primary DNS suffix, such as comp1.example.com).
  • /enumerate[:{ALTERNATENAMES | PRIMARYNAME | ALLNAMES}]
    Lists the primary and/or any alternate names. The following valid values can be specified:

    Value Description

    ALTERNATENAMES

    Lists the alternate names only.

    PRIMARYNAME

    Lists the primary name only.

    ALLNAMES

    Lists the primary and any alternate names. This is the default.

  • /verify
    Checks if there is a DNS A record and an Service Principal Name (SPN) for each computer name.
  • {/help | /?}
    Displays command-line help for the computername operation.

Sample Usage

netdom computername reskit /enumerate:primaryname

NetDom join

Joins a workstation or member server to a domain. The act of joining a computer to a domain creates an account for the computer on the domain, if it does not already exist.

Syntax

Art ImageNetDom join Computer {/d: | /domain:}Domain [/ou:OUPath] [{/ud: | /userd:}[Domain\]User [{/pd: | /passwordd:}{Password|*}]] [{/uo: | /usero}User [{/po: | /passwordo}{Password|*}] [/reboot[:Delay]] [/help | /?]

Parameters

Note

  • When joining a computer running Windows NT 4.0 or earlier to the domain, the operation is not transacted. This means that a failure during the operation might leave the computer in an undetermined state with respect to the domain to which it was meant to join.
  • Computer
    Specifies the name of the computer to be joined.
  • {/d: | /domain:}Domain
    Specifies the domain to which the account is joined. If this parameter is omitted, then the domain that the current computer belongs to is used.
  • ****/ou:OUPath
    Specifies the organizational unit (OU) under which to create the account. This must be the full RFC 1779 distinguished name of the OU. If omitted, the account is created under the default OU for machine objects for that domain.
  • {/ud: | /userd:}[Domain\]User
    Specifies the user account that makes the connection with the domain specified in the /d or /domain parameter. If this parameter is omitted, the current user account is used.
  • {/pd: | /passwordd:}{Password|*}
    Specifies the password of the user account that is specified in the /ud or /userd parameter. Use the wildcard character (*) to be prompted for the password.
  • {/uo: | /usero**}User**
    Specifies the user account that makes the connection with the computer to be joined. If this parameter is omitted, the current user account is used.
  • {/po: | /passwordo**}{Password|*}**
    Specifies the password of the user account that is specified in the /uo or /usero parameter. Use the wildcard character (*) to be prompted for the password.
  • /reboot[:Delay]
    Specifies that the computer shuts down and automatically reboots after the join has completed. The Delay value is the number of seconds before automatic shutdown occurs. The default Delay value is 20 seconds.
  • {/help | /?}
    Displays command-line usage for the join operation.

Sample Usage

netdom join /d:reskit.ms.com mywksta

NetDom move

Moves a workstation or member server to a new domain. The act of moving a computer to a new domain creates an account for the computer on the domain, if it does not already exist.

Syntax

Art ImageNetDom move Computer {/d: | /domain:}Domain [/ou:OUPath] [{/ud: | /userd}[Domain\]User [{/pd: | /passwordd}{Password|*}] [{/uo: | /usero}[Domain\]User [{/po: | /passwordo}{Password|*}]] [{/uf: | /userf}[Domain\]User [{/pf: | /passwordf}{Password|*}]] [/reboot[:Delay]] [{/help | /?}]

Parameters

Notes

  • When moving a computer running Windows NT 4.0 or earlier to the domain, the operation is not transacted. This means that a failure during the operation might leave the computer in an undetermined state with respect to the domain of its intended move.

  • When moving a computer to a new domain, the old computer account in the previous domain is not deleted. If credentials are supplied for the former domain, the old computer account is disabled.

  • The act of moving a computer to a new domain will create an account for the computer on the domain if it does not already exist.

  • Computer
    Specifies the name of the computer to be moved.
  • {/d: | /domain:}Domain
    Specifies the domain to which the account is moved. If the parameter is omitted, then the domain that the current computer belongs to is used.
  • ****/ou:OUPath
    Specifies the organizational unit (OU) under which to create the account. This must be the full RFC 1779 distinguished name of the OU. If omitted, the account is created under the default OU for machine objects for that domain.
  • {/ud: | /userd**}[Domain\]User**
    Specifies the user account that makes the connection with the domain specified in the /d or /domain parameter. If this parameter is omitted, the current user account is used.
  • {/pd: | /passwordd**}{Password|*}**
    Specifies the password of the user account that is specified in the /ud or /userd parameter. Use an asterisk (*) to be prompted for the password.
  • {/uo: | /usero**}User**
    Specifies the user account to make the connection with the computer to be moved. If this parameter is omitted, the current user account is used.
  • {/po: | /passwordo**}{Password|*}**
    Specifies the password of the user account that is specified in the /uo or /usero parameter. Use the wildcard character (*) to be prompted for the password.
  • {/uf: | /userf**}User**
    Specifies the user account to make the connection with the computer's former domain (of which the computer had been a member prior to the move). This parameter is used to disable the old computer account.
  • {/pf: | /passwordf**}{Password|*}**
    Specifies the password of the user account that is specified in the /uf or /userf parameter. Use the wildcard character (*) to be prompted for the password.
  • /reboot[:Delay]
    Specifies that the computer shuts down and automatically reboots after the move has completed. The Delay value is the number of seconds before automatic shutdown occurs. The default Delay value is 20 seconds.
  • {/help | /?}
    Displays command-line usage for the move operation.

Sample Usage

netdom move /d:newdomain mywksta

NetDom query

Queries the domain for information such as membership and trust.

Syntax

Art ImageNetDom query {/d: |  /domain:}Domain [{/s: | /server:}Server] [{/ud: | /userd:}[Domain\]User {/pd: | /passwordd}{Password|*}] [/verify] [/reset] [/direct] {WORKSTATION|SERVER|DC|OU|PDC|FSMO|TRUST} [{/help | /?}]

Parameters

  • {/d: | /domain:}Domain
    Specifies the domain to query for the information. If this parameter is omitted, then the domain that the current computer belongs to is used.
  • {/s: | /server:}Server
    Specifies the name of a domain controller that performs the query.
  • {/ud: | /userd:}[Domain\]User
    Specifies the user account that makes the connection with the domain in the /d or /domain parameter. If this parameter is omitted, the current user account is used.
  • {/pd: | /passwordd**}{Password|*}**
    Specifies the password of the user account that is specified in the /ud or /userd parameter. Use the wildcard character (*) to be prompted for the password.
  • /verify
    Specifies verification of the secure channel secrets for all enumerated memberships or trusts, and displays them. Unless the user is an enterprise-level administrator, it will not be possible to verify all secure channel secrets.
  • /reset
    Specifies resynchronization ofthe secure channel secrets for all enumerated memberships or trusts which are currently broken. The /reset parameter implies the /verify parameter. Unless the user is an enterprise-level administrator, it might not be possible to reset all enumerated trusts or memberships.
  • /direct
    Indicates that the query for trust relationships returns only direct trust relationships, rather than direct and indirect relationships. This parameter is valid only when Domain is specified with the /d parameter.
  • WORKSTATION|SERVER|DC|OU|PDC|FSMO|TRUST
    Specifies the type of list to generate.

    Object Description

    WORKSTATION

    Queries the domain for the list of workstations.

    SERVER

    Queries the domain for the list of servers.

    DC

    Queries the domain for the list of domain controllers.

    OU

    Queries the domain for the list of OUs under which the specified user can create a machine object.

    PDC

    Queries the domain for the current primary domain controller.

    FSMO

    Queries the domain for the current list of operations master (also know as flexible single master operations or FSMO) owners.

    TRUST

    Queries the domain for the list of its trusts.

  • {/help | /?}
    Displays command-line usage for the query operation.

Sample Usage

netdom query /d:reskit.ms.com DC

NetDom remove

Removes a workstation or server from the domain.

Syntax

Art ImageNetDom remove Computer {/d: | /domain:}Domain [{/ud: | /userd:}[Domain\]User [{/pd: | /passwordd}{Password|*}]] [{/uo: | /usero}User [{/po: |/passwordo}{Password|*}]] [/reboot[:Delay]] [{/help | /?}]

Parameters

  • Computer
    Specifies the name of the computer to be removed.
  • {/d: | /domain:}Domain
    Specifies the domain from which the account is to be removed. If this parameter is omitted, then the domain that the current computer belongs to is used.
  • {/ud: | /userd:}[ Domain\]User
    Specifies the user account that makes the connection with the domain in the /d or /domain parameter. If this parameter is omitted, then the current user account is used.
  • {/pd: | /passwordd**}{Password|*}**
    Specifies the password of the user account that is specified in the /ud or /userd parameter. Use the wildcard character (*) to be prompted for the password.
  • {/uo: | /usero**}User**
    Specifies the user account to make the connection with the computer to be removed. If this parameter is omitted, then the current user account is used.
  • {/po: |/passwordo**}{Password|*}**
    Specifies the password of the user account that is specified in the /uoor /usero parameter. Use the wildcard character (*) to be prompted for the password.
  • /reboot[:Delay]
    Specifies that the computer shuts down and automatically restarts after the remove operation has completed. The Delay value is the number of seconds before automatic shutdown occurs. The default Delay value is 20 seconds.
  • {/help | /?}
    Displays command-line usage for the remove operation.

Sample Usage

netdom remove /d:reskit.ms.com mywksta

NetDom movent4bdc

Renames a Windows NT 4.0 backup domain controller to reflect a domain name change. This can assist in Windows NT 4.0 domain renaming efforts.

Syntax

Art Imagenetdom movent4bdc Computer [{/d: | /domain:}Domain] [/reboot[:Delay]] [{/help | /?}]

Parameters

  • Computer
    Specifies the name of the backup domain controller to rename.
  • {/d: | /domain:}Domain
    Specifies the new name of the domain.
  • /reboot[:Delay]
    Specifies that the computer shuts down and automatically reboots after the rename operation has completed. The Delay value is the number of seconds before automatic shutdown occurs. The default Delay value is 20 seconds.
  • {/help | /?}
    Displays command-line usage for the movent4bdc operation.

Sample Usage

netdom movent4bdc /d:newdomain BDC51

NetDom renamecomputer

Renames a domain computer and its corresponding domain account. Use this command to rename domain workstations and member servers only. To rename domain controllers, use the NetDom computername command.

Syntax

Art ImageNetDom renamecomputer Computer /newname:NewComputerName /userd:[Domain\]UserName [/passwordd:[Password | *]] /usero:[Domain\]UserName [/passwordo:[Password | *]] [/reboot[:Delay]] [{/help | /?}]

Parameters

  • Computer
    Specifies the name of the computer to rename.
  • ****/newname:NewComputerName
    Specifies the new name of the computer.
  • ****/userd:[domain\]UserName
    Specifies the user account to be used for the destination domain.
  • ****/passwordd:[password | *]
    Specifies the password of the user account that is specified in the /ud or /userd parameter. If the wildcard character (*) is used, then the user will be prompted for the password.
  • ****/usero:[domain\]UserName
    Specifies the user account to be used for the originating domain.
  • ****/passwordo:[password| *]
    Specifies the password of the user account that is specified in the /uo or /usero parameter. If the wildcard character (*) is used, then the user will be prompted for the password.
  • /force[:Delay]
    The user will be prompted for confirmation unless the /force parameter is specified.
  • /reboot[:Delay]
    Specifies that the computer shuts down and automatically reboots after the rename operation has completed. The Delay value is the number of seconds before automatic shutdown occurs. The default Delay value is 20 seconds.
  • {/help | /?}
    Displays command-line usage for the renamecomputer operation.

Note

  • Do not use renamecomputer to rename Windows Server 2003 or Windows 2000 domain controllers. Using the renamecomputer operation to rename a domain controller may result in the domain controller no longer functioning as a domain controller on the network. To rename Windows Server 2003 and Windows 2000 servers and domain controllers, use the computername operation.

NetDom reset

Resets the secure connection between a workstation and a domain controller.

Syntax

Art ImageNetDom reset Computer {/d: | /domain:}Domain [{/s: | /server:}Server] [{/uo: | /usero:}User {/po: | /passwordo}{Password|*}] [{/help | /?}]

Parameters

  • Computer
    Specifies the name of the computer for which the connection is to be reset.
  • {/d: | /domain:}Domain
    Specifies the domain with which to establish the secure connection. If this parameter is omitted, then the domain that the current computer belongs to is used.
  • {/s: | /server:}Server
    Specifies the name of the domain controller to use to establish the secure connection.
  • {/uo: | /usero:}User
    Specifies the user account that makes the connection with the computer to be reset. If this parameter is omitted, then the current user account is used.
  • {/po: | /passwordo**}{Password|*}**
    Specifies the password of the user account that is specified in the /uo or /usero parameter. Use the wildcard character (*) to be prompted for the password.
  • {/help | /?}
    Displays command-line usage for the reset operation.

Sample Usage

netdom reset /d:reskit.ms.com redmond

NetDom resetpwd

Resets the machine account password for a Domain Controller.

Syntax

Art ImageNetDom resetpwd {/s: | /server:}Server {/ud: | /userd:}[Domain\]User {/pd: | /passwordd:}{Password|*}] [{/help | /?}]

Parameters

  • {/s: | /server:}Server
    Specifies the name of the domain controller to use for setting the machine account password.
  • {/ud: | /userd:}[Domain\]User
    Specifies the user account that makes the connection with the domain specified in the /s parameter. This must be in Domain\User format. If this parameter is omitted, then the current user account is used.
  • {/pd: | /passwordd:}{Password|*}
    Specifies the password of the user account that is specified in the /ud parameter. Use the wildcard character (*) to be prompted for the password.
  • {/help | /?}
    Displays command-line usage for the resetpwd operation.

NetDom trust

Establishes, verifies, or resets a trust relationship between domains.

Syntax

Art ImageNetDom trust TrustingDomainName {/d: | /domain:TrustedDomainName [{/ud: | /userd:}[Domain\]User [{/pd: | /passwordd:}{Password|*}] [{/uo: | /usero:}User] [{/po: | /passwordo:}{Password|*}] [/verify] [/reset] [/passwordt:NewRealmTrustPassword] [/add [/realm]] [/remove [/force]] [/twoway] [/kerberos] [/transitive[:{YES|NO}]] [/oneside:{TRUSTED | TRUSTING}] [/force] [/quarantine[:{YES | NO}]] [/namesuffixes:TrustName [/togglesuffix:#]] [/EnableSIDHistory] [/ForestTRANsitive] [/SelectiveAUTH][/AddTLN][/AddTLNEX][/RemoveTLN] [/RemoveTLNEX][{/help | /?}]

Parameters

  • TrustingDomainName
    Specifies the name of the trusting domain.
  • {/d: | /domain:}TrustedDomainName
    Specifies the name of the trusted domain. If this parameter is omitted, then the domain that the current computer belongs to is used.
  • {/ud: | /userd:}[Domain\]User]
    Specifies the user account that makes the connection with the domain specified in the /d or /domain parameter. If this parameter is omitted, then the current user account is used.
  • ****/pd:{Password|*}
    Specifies the password of the user account that is specified in the /ud or /userd: parameter. Use the wildcard character (*) to be prompted for the password.
  • {/uo: | /usero:}User
    Specifies the user account that makes the connection with the trusting domain. If this parameter is omitted, then the current user account is used.
  • {/po: | /passwordo:}{ Password|*}
    Specifies the password of the user account that is specified in the /uo or /usero parameter. Use the wildcard character (*) to be prompted for the password.
  • /verify
    Verifies the secure channel secrets upon which a specific trust is based.
  • /reset
    Resets the trust secret between trusted domains or between the domain controller and the workstation.
  • ****/passwordt:NewRealmTrustPassword
    Specifies a new trust password. This parameter is valid only with the /add parameter, and only if one of the domains specified is a non-Windows Kerberos realm. The trust password is set on the Windows domain only, which means that credentials are not needed for the non-Windows domain.
  • /add
    Specifies to create a trust.
  • /realm
    Indicates that the trust is created to a non-Windows Kerberos realm. The /realm parameter is valid only with the /add and /passwordt parameters.
  • /remove
    Specifies to break a trust.
  • /force
    Removes both the trusted domain object and the cross-reference object for the specified domain from the forest. Use this option to clean up decommissioned domains that are no longer in use, and cannot be removed by using the Active Directory Installation wizard. This problem can occur if the domain controller for that domain was disabled or damaged and there were no domain controllers, or if it was not possible to recover the domain controller from backup media. This parameter is valid only when the /remove parameter is specified.
  • /twoway
    Specifies establishment ofa two-way trust relationship rather than a one-way trust relationship.
  • /kerberos
    Specifies exercisingthe Kerberos protocol between a workstation and a target domain. This parameter is valid only when the /verify parameter is specified.
  • /transitive[:{YES|NO}]
    Specifies whether to set a transitive or non-transitive trust. This parameter is valid only for a non-Windows Kerberos realm. Non-Windows Kerberos trusts are created as non-transitive. If no value is specified, then the current transitivity state is displayed.

    Value Description

    YES

    Sets the realm to a transitive trust.

    NO

    Sets the realm to a non-transitive trust.

  • ****/oneside:{TRUSTED| TRUSTING}
    Denotes that the trust object should only be created or removed on one domain.

    Value Description

    TRUSTED

    Indicates that the trust object is created or removed on the trusted domain specified by the /d or /domain parameter).

    TRUSTING

    Indicates that the trust object is to be created or removed on the trusting domain. Valid only with the /add or /REMove parameter. The /passwordt parameter is required when using with the /ADD or /REMove option

  • /quarantine[:{YES | NO}]
    Sets or clears the domain quarantine attribute. If no value is specified then the current quarantine state is displayed.

    Value Description

    YES

    Specifies that only SIDs from the directly trusted domain will be accepted for authorization data returned during authentication. SIDS from any other domains will be removed.

    NO

    Specifies that any SID will be accepted for authorization data returned during authentication. This is the default value.

  • ****/namesuffixes:TrustName
    Lists the routed name suffixes for TrustName on the domain named by TrustingDomainName. The /usero and /passwordo parameters can be used for authentication. The /domain parameter is not required.
  • ****/togglesuffix:#
    Changes the status of a name suffix. Used with the /namesuffixes parameter. The number of the name entry specified by the /namesuffixes parameter must be provided to indicate which name will have its status changed. Names that are in conflict cannot have their status changed until the name in the conflicting trust is disabled. Always precede this command with the /namesuffixes parameter because LSA will not always return the names in the same order.
  • /EnableSIDistory
    Specifying yes allows users who migrate to the trusted forest from any other forest to use SID history to access resources in this forest. Valid only for an outbound forest trust. This should be done only if the trusted forest administrators can be trusted enough to specify SIDs of this forest in the SID history attribute of their users appropriately. Specifying no would disable the ability of the migrated users in the trusted forest to use SID history to access resources in this forest. Specifying /EnableSIDHistory without yes or no will display the current state.
  • /ForestTRANsitive
    Specifying yes marks this trust as forest transitive. Specifying no marks this trust as not forest transitive. Specifying /ForestTRANsitive without yes or no will display the current state of this trust attribute. Valid only for non-Windows real trusts and can only be performed on the root domain for a forest.
  • /SelectiveAUTH
    Specifying no disables selective authentification across this trust. Specifying /SelectiveAUTH without yes or no displays the currrent state of this trust attribute. Specifying yes enables selective authentification across this trust. Valid only on outbound forest and external trusts.
  • /AddTLN
    Adds the specified top level name (DNS name suffix) to the forest trust info for the specified trust. Valid only for a forest transitive non-Windows realm trust and can only be performed on the root domain for a forest. Refer to the /NameSuffixes operation for a list of name suffixes.
  • /AddTLNEX
    Adds the specified top level name exclusion(DNS name suffix) to the forest trust info for the specified trust. Valid only for a forest transitive non-Windows realm trust and can only be performed on the root domain for a forest. Refer to the /NameSuffixes operation for a list of name suffixes.
  • /RemoveTLN
    Removes the specified top level name (DNS name suffix) from the forest trust info from the specified trust. Valid only for a forest transitive non-Windows realm trust and can only be performed on the root domain for a forest. Refer to the /NameSuffixes operation for a list of name suffixes.
  • /RemoveTLNEX
    Removes the specified top level name exclusion (DNS Name Suffix) from the forest trust info from the specified trust. Valid only for a forest transitive non-Windows realm trust and can only be performed on the root domain for a forest. Refer to the /NameSuffixes operation for a list of name suffixes.
  • {/help | /?}
    Displays command-line usage for the trust operation.

Sample Usage

netdom trust /d:masterdom resourcedom

NetDom verify

Verifies the secure connection between a workstation and a domain controller.

Syntax

Art ImageNetDom verify Computer {/d: | /domain:}Domain [{/uo: | usero}User {/po: | /passwordo}{Password|*}] [{/help | /?}]

Parameters

  • Computer
    Specifies the name of the computer whose secure connection is verified.
  • {/d: | /domain:}Domain
    Specifies the domain with which to verify the secure connection. If this parameter is omitted, then the domain that the current computer belongs to is used.
  • {/uo: | usero**}User**
    Specifies the domain with which to verify the secure connection. If this parameter is omitted, then the current user account is used.
  • {/po: | /passwordo**}{Password|*}**
    Specifies the password of the user account that is specified in the /uo or /usero parameter. Use the wildcard character (*) to be prompted for the password.
  • {/help | /?}
    Displays command-line usage for the verify operation.

Sample Usage

netdom verify /d:resourcedom yourwksta

See Also

Concepts

Netdom Overview
Netdom Remarks
Netdom Examples
Spcheck Overview
Nltest Overview
Netdiag Overview
Netcap Overview
Httpcfg Overview
Dnslint Overview
Dnscmd Overview
Dhcploc Overview
Dcdiag Overview
Browstat Overview
Alphabetical List of Tools