Set-PcsvDeviceBootConfiguration
Set-PcsvDeviceBootConfiguration
Modifies the boot configuration on the remote hardware device.
Sintaxis
Parameter Set: InputObject (cdxml)
Set-PcsvDeviceBootConfiguration -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-OneTimeBootSource] <String> [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByComputerName
Set-PcsvDeviceBootConfiguration [-TargetAddress] <String> [-Credential] <PSCredential> [-ManagementProtocol] <ManagementProtocol> [[-Port] <UInt16> ] [-AsJob] [-Authentication <Authentication> ] [-CimSession <CimSession[]> ] [-PassThru] [-SkipCACheck] [-SkipCNCheck] [-SkipRevocationCheck] [-ThrottleLimit <Int32> ] [-TimeoutSec <UInt32> ] [-UseSSL] [-OneTimeBootSource] <String> [-Confirm] [-WhatIf] [ <CommonParameters>]
Descripción detallada
The Set-PcsvDeviceBootConfiguration cmdlet modifies the boot configuration for a remote hardware device. To retrieve the current boot configuration for a device, use the Get-PcsvDevice cmdlet.
The StructuredBootString property of the returned instance lists the valid boot sources, and the OneTimeBootSource property indicates whether one of the valid boot sources has already been configured to be the primary boot source for the next time the device undergoes a full restart.
Parámetros
-AsJob
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-Authentication<Authentication>
Specifies an authentication method to use for devices managed by Web Services for Management (WS-Management). Do not use this parameter for devices managed by using Intelligent Platform Management Interface (IPMI). Los valores aceptables para este parámetro son los siguientes:
-- Basic
-- Digest
-- Default
If you specify Default for this parameter and a value of WSMAN for the ManagementProtocol parameter, the cmdlet uses Basic authentication.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-CimSession<CimSession[]>
Ejecuta el cmdlet en una sesión remota o en un equipo remoto. Escriba un nombre de equipo o un objeto de sesión, como la salida de un cmdlet New-CimSession o Get-CimSession. El valor predeterminado es la sesión actual en el equipo local.
Alias |
Session |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-Credential<PSCredential>
Specifies a PSCredential object based on a user name and password. To obtain a PSCredential object, use the Get-Credential cmdlet. For more information, type Get-Help Get-Credential
. This parameter specifies the credential for the remote hardware device.
Alias |
ninguno |
¿Requerido? |
true |
¿Posición? |
3 |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-InputObject<CimInstance[]>
Specifies an array of devices, as MSFT_PCSVDevice objects, to manage. To obtain MSFT_PCSVDevice objects, use the Get-PcsvDevice cmdlet. This parameter specifies the credential for the remote hardware device.
Alias |
ninguno |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByValue) |
¿Aceptar caracteres comodín? |
false |
-ManagementProtocol<ManagementProtocol>
Specifies a management protocol used to communicate with a device. Los valores aceptables para este parámetro son los siguientes:
-- WSMAN
-- IPMI
Refer to your hardware documentation for supported management protocols.
Specify WSMAN for devices that represent information by using Systems Management Architecture for Server Hardware (SMASH), Desktop and mobile Architecture for System Hardware (DASH) or Physical Computer System View profiles.
Alias |
MP |
¿Requerido? |
true |
¿Posición? |
4 |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-OneTimeBootSource<String>
Specifies a one-time boot source, in the format CIM:<identifier>:<index>. For example, you can specify a boot source as CIM:Network:1. The StructuredBootString property of the PcsvDevice instance contains a list of valid boot sources.
Alias |
OT,NextBoot |
¿Requerido? |
true |
¿Posición? |
2002 |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-PassThru
Devuelve un objeto que representa el elemento con el que está trabajando. De forma predeterminada, este cmdlet no genera ningún resultado.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-Port<UInt16>
Specifies a network port on the remote computer to use for the management connection. If you do not specify a port, the cmdlet uses the following default values:
-- IPMI and WSMAN over HTTP. Port 623
-- WSMAN over HTTPS. Port 664.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
5 |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-SkipCACheck
Indicates that the client connects by using HTTPS without validating that a trusted CA signed the server certificate. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.
Do not specify this parameter unless you can establish trust in another way, such as if the remote computer is part of a network that is physically secure and isolated, or if the remote computer is a trusted host in a Windows Remote Management (WinRM) configuration.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-SkipCNCheck
Indicates that the certificate common name of the server does not need to match the hostname of the server. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.
Specify this parameter only for remote operations with WS-Management devices that use the HTTPS protocol. Use this parameter only for trusted computers.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-SkipRevocationCheck
Indicates that the cmdlet skips the revocation check of server certificates. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.
Be sure to specify this parameter only for trusted computers.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-TargetAddress<String>
Specifies the name or IP address of the management port on the remote hardware device. For server hardware, this is typically a dedicated Baseboard Management Controller (BMC) IP address. For other devices, like network switches, this is the IP address of their management port. For desktop and mobile devices, the BMC sometimes shares the same IP address as the computer.
Alias |
CN,ComputerName,IpAddress |
¿Requerido? |
true |
¿Posición? |
2 |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-ThrottleLimit<Int32>
Especifica el número máximo de operaciones simultáneas que se pueden establecer para ejecutar el cmdlet. Si se omite este parámetro o es especifica un valor de 0
, Windows PowerShell ® calcula un límite óptimo para el cmdlet en función del número de cmdlets de CIM que se estén ejecutando en el equipo. El límite solo se aplica al cmdlet actual, no a la sesión ni al equipo.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-TimeoutSec<UInt32>
Specifies how long to wait, in seconds, for a response from the remote hardware device. After this period, the cmdlet abandons the connection attempt.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-UseSSL
Indicates that the cmdlet connects to a remote device by using SSL. WS-Management encrypts all content transmitted over the network. Specify this parameter to use the additional protection of HTTPS instead of HTTP. If you specify this parameter and SSL is not available on the connection port, the command fails.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-Confirm
Solicita confirmación antes de ejecutar el cmdlet.
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
falso |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-WhatIf
Muestra lo que sucedería si se ejecutara el cmdlet. El cmdlet no se ejecuta.
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
falso |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
<CommonParameters>
Este cmdlet admite los siguientes parámetros comunes: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer y -OutVariable. Para obtener más información, consulte about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Entradas
El tipo de entrada es el tipo de los objetos que se pueden canalizar al cmdlet.
Salidas
El tipo de resultado es el tipo de objetos que emite el cmdlet.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/HardwareManagement/MSFT_PCSVDevice
The PCSV device is only returned as output if the PassThru parameter is specified.
Ejemplos
Example 1 Modify the device boot configuration to use PXE boot
This example configures the boot source to use Pre-Boot Execution Environment (PXE) boot the next time the system boots.
The first command uses the Get-Credential cmdlet to get credentials, and stores the credentials in the variable named $MyCred. The cmdlet prompts you for a user name and password. For more information, type Get-Help Get-Credential
.
The second command modifies the device boot configuration for the target computer, by using the OneTimeBootSource parameter to specify the boot configuration.
PS C:\> $MyCred = Get-Credential
PS C:\> Set-PCSVDeviceBootConfiguration -TargetAdress 10.1.12.43 -ManagementProtocol WSMan -Credential $MyCred -UseSSL -OneTimeBootSource "CIM:Network:1"
Example 2: Modify the device boot configuration to use the DVD drive
This example configures the boot source to use the DVD drive for the next time the system boots.
The first command uses the Get-Credential cmdlet to get credentials, and stores the credentials in the variable named $MyCred. The cmdlet prompts you for a user name and password. For more information, type Get-Help Get-Credential
.
The second command uses the Get-PcsvDevice cmdlet to retrieve the configuration for the target computer, and passes the output to the Set-PcsvDeviceBootConfiguration cmdlet by using the pipeline operator.
PS C:\> $MyCred = Get-Credential
PS C:\> Get-PCSVDevice -TargetAddress 10.1.12.43 -ManagementProtocol WSMan -Credential $MyCred -UseSSL | Set-PcsvDeviceBootConfiguration -OneTimeBootSource "CIM:CD/DVD:1"