Add-NlbClusterVip
Add-NlbClusterVip
Adds a virtual IP address to a Network Load Balancing (NLB) cluster.
Sintaxis
Parameter Set: NonPipeline
Add-NlbClusterVip [-IP] <IPAddress> -InterfaceName <String> [-HostName <String> ] [-SubnetMask <IPAddress> ] [ <CommonParameters>]
Parameter Set: Pipeline
Add-NlbClusterVip [-IP] <IPAddress> -InputObject <Cluster[]> [-SubnetMask <IPAddress> ] [ <CommonParameters>]
Descripción detallada
The Add-NlbClusterVIP cmdlet adds a virtual IP address to a Network Load Balancing (NLB) cluster. The virtual IP address will appear on all hosts in the cluster. This IP address is used to address the cluster as a whole, and it should be the IP address that maps to the full Internet name that you specify for the cluster.
This cmdlet changes the configuration on all cluster nodes. As a result, the NLB cluster will have to restart the convergence process on all nodes to guarantee that configuration changes have been applied on all nodes and that a consistent state is reached. Any additional operations on the NLB cluster should not be initiated until all cluster nodes have completed the convergence process and are back to the converged state.
Parámetros
-HostName<String>
Specifies the name of the cluster host against which this cmdlet is run. If this parameter is omitted or a value of . is entered, then the local cluster is assumed.
Alias |
Host,HN,H |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-IP<IPAddress>
Specifies the IP address of the new cluster to which the virtual IP address is added.
Alias |
ninguno |
¿Requerido? |
true |
¿Posición? |
1 |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-InputObject<Cluster[]>
Specifies the cluster to which the cluster virtual IP address is added.
Alias |
ninguno |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByValue, ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-InterfaceName<String>
Specifies the interface to which NLB is bound. This is the interface of the cluster against which this cmdlet is run.
Alias |
Interface,IN,I |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-SubnetMask<IPAddress>
Specifies the subnet mask for the virtual IP address of the new cluster.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
<CommonParameters>
Este cmdlet admite los siguientes parámetros comunes: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer y -OutVariable. Para obtener más información, consulte about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Entradas
El tipo de entrada es el tipo de los objetos que se pueden canalizar al cmdlet.
- Microsoft.NetworkLoadBalancingClusters.PowerShell.Cluster
Salidas
El tipo de resultado es el tipo de objetos que emite el cmdlet.
- Microsoft.NetworkLoadBalancingClusters.PowerShell.ClusterVip
Ejemplos
EXAMPLE 1
This example adds an IPv6 IP address to the list of virtual NLB cluster IP addresses on the network interface vlan-3.
PS C:\> Add-NlbClusterVip -IP fe80::94dc:5e59:3626:f1d4 -InterfaceName vlan-3
EXAMPLE 2
This example adds an IPv6 IP address to the list of virtual NLB cluster IP addresses on the local cluster.
PS C:\> Get-NlbCluster | Add-NlbClusterVip -IP fe80::94dc:5e59:3626:f1d4