New-Cluster

New-Cluster

Creates a new failover cluster.

Sintaxis

Parameter Set: Default
New-Cluster [-Name] <String> [-AdministrativeAccessPoint <AdminAccessPoint> {ActiveDirectoryAndDns | Dns | None} ] [-Force] [-IgnoreNetwork <StringCollection> ] [-Node <StringCollection> ] [-NoStorage] [-StaticAddress <StringCollection> ] [ <CommonParameters>]

Descripción detallada

The New-Cluster cmdlet creates a new failover cluster. Before creating a cluster, the hardware (servers, networks, and storage) must be connected, and the validation tests must be run.

Use Test-Cluster to run the validation tests. The tests will confirm that the hardware and settings are compatible with failover clustering. There are multiple types of tests, including Inventory, System Configuration, Network, Storage, and other types of tests.

Note: Este cmdlet no se puede ejecutar de forma remota sin la autenticación del proveedor de servicio de seguridad de credenciales (CredSSP) en el equipo servidor.

Parámetros

-AdministrativeAccessPoint<AdminAccessPoint>

Specifies the type of administrative access point that the cmdlet creates for the cluster. Los valores aceptables para este parámetro son los siguientes:

-- ActiveDirectoryAndDns. The cmdlet creates an administrative access point for the cluster. The administrative access point is registered in DNS and enabled in Servicios de dominio de Active Directory.
-- Dns. The cmdlet creates an administrative access point for the cluster. The administrative access point is registered in DNS but is not enabled in Servicios de dominio de Active Directory.
-- None. The cmdlet does not create an administrative access point for the cluster. Some clustered roles and functionality might not be available for a cluster that does not have an administrative access point. Also, you cannot use Failover Cluster Manager to manage a cluster that does not have an administrative access point.

-Force

Fuerza que el comando se ejecute sin pedir confirmación al usuario.

-IgnoreNetwork<StringCollection>

Specifies one or more networks to ignore when running the cmdlet. Networks with DHCP enabled are always included, but other networks need a static address to be specified using the StaticAddress parameter or should be explicitly ignored with this IgnoreNetwork parameter.

-Name<String>

Specifies the name of the cluster to create.

-NoStorage

Specifies that shared storage is ignored during the cluster creation. The cluster created at the end of the operation will not have shared storage. Shared storage can later be added by piping the ClusterDiskInfo object from the Get-ClusterAvailableDisk cmdlet into the Add-ClusterDisk cmdlet.

-Node<StringCollection>

Specifies a comma-separated list of cluster node names, or server names, on which to create the cluster. If this parameter is not specified, then a one node cluster is created on the local physical computer.

-StaticAddress<StringCollection>

Specifies one or more static addresses to use when running the cmdlet. Networks with DHCP enabled are always included, but other networks need a static address to be specified using the StaticAddress parameter or should be explicitly ignored with this IgnoreNetwork parameter.

<CommonParameters>

Este cmdlet admite los siguientes parámetros comunes: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer y -OutVariable. Para obtener más información, consulte about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Entradas

El tipo de entrada es el tipo de los objetos que se pueden canalizar al cmdlet.

• None

Salidas

El tipo de resultado es el tipo de objetos que emite el cmdlet.

• Microsoft.FailoverClusters.PowerShell.Cluster

Ejemplos

EXAMPLE 1

This example creates a four-node cluster named cluster1, using default settings for IP addressing.

PS C:\> New-Cluster -Name cluster1 -Node node1,node2,node3,node4

EXAMPLE 2

This example creates a two-node cluster named cluster1. The cluster will not have any clustered storage, or disk resources. Storage can be added using the Get-ClusterAvailableDisk cmdlet with the Add-ClusterDisk cmdlet.

PS C:\> New-Cluster -Name cluster1 -Node node1,node2 -NoStorage

EXAMPLE 3

This example creates a four-node cluster named cluster1 that uses the static IP address 2.0.0.123.

PS C:\> New-Cluster -Name cluster1 -Node node1,node2,node3,node4 -StaticAddress 2.0.0.123

EXAMPLE 4

This example creates a four-node cluster named cluster1 that uses the static IP addresses 2.0.0.123 and 3.0.0.123.

PS C:\> New-Cluster -Name cluster1 -Node node1,node2,node3,node4 -StaticAddress 2.0.0.123,3.0.0.123

EXAMPLE 5

This example creates a four-node cluster named cluster1. The cluster uses default settings for IP addressing, and does not use the network 2.0.0.0/8.

PS C:\> New-Cluster -Name cluster1 -Node node1,node2,node3,node4 -IgnoreNetwork 2.0.0.0/8

EXAMPLE 6

This example creates a four-node cluster named cluster1. The cluster uses the static IP address 2.0.0.123, and does not use the network 3.0.0.0/8.

PS C:\> New-Cluster -Name cluster1 -Node node1,node2,node3,node4 -StaticAddress 2.0.0.123 -IgnoreNetwork 3.0.0.0/8

Temas relacionados

Add-ClusterNode

Get-Cluster

Remove-Cluster

Start-Cluster

Stop-Cluster

Test-Cluster