Set-ADResourcePropertyList

Windows Server 2012 R2 and Windows 8.1

Actualizado: julio de 2015

Se aplica a: Windows 8.1, Windows PowerShell 4.0, Windows Server 2012 R2

Set-ADResourcePropertyList

Modifies a resource property list in Active Directory.

Sintaxis

Parameter Set: Default
Set-ADResourcePropertyList [-Server <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: Identity
Set-ADResourcePropertyList [-Identity] <ADResourcePropertyList> [-Add <Hashtable> ] [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Clear <String[]> ] [-Credential <PSCredential> ] [-Description <String> ] [-PassThru] [-ProtectedFromAccidentalDeletion <Boolean> ] [-Remove <Hashtable> ] [-Replace <Hashtable> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: Instance
Set-ADResourcePropertyList -Instance <ADResourcePropertyList> [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Credential <PSCredential> ] [-PassThru] [-Confirm] [-WhatIf] [ <CommonParameters>]




Descripción detallada

The Set-ADResourcePropertyList cmdlet can be used to modify a resource property list in Active Directory.

Parámetros

-Add<Hashtable>

Specifies values to add to an object property. Use this parameter to add one or more values to a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the Lightweight Directory Access Protocol (LDAP) display name. You can specify multiple values to a property by specifying a comma-separated list of values and more than one property by separating them using a semicolon. The format for this parameter is:

-Add @{Attribute1LDAPDisplayName=value1, value2, ...; Attribute2LDAPDisplayName=value1, value2, ...; AttributeNLDAPDisplayName=value1, value2, ...}

When you use the Add, Remove, Replace, and Clear parameters together, the operations will be performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear


Alias

ninguno

¿Requerido?

false

¿Posición?

named

Valor predeterminado

ninguno

¿Aceptar canalización?

false

¿Aceptar caracteres comodín?

false

-AuthType<ADAuthType>

Specifies the authentication method to use. Los valores aceptables para este parámetro son los siguientes:

-- Negotiate or 0
-- Basic or 1

The default authentication method is Negotiate.

A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.


Alias

ninguno

¿Requerido?

false

¿Posición?

named

Valor predeterminado

Microsoft.ActiveDirectory.Management.AuthType.Negotiate

¿Aceptar canalización?

false

¿Aceptar caracteres comodín?

false

-Clear<String[]>

Specifies an array of object properties that will be cleared in the directory. Use this parameter to clear one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:

-Clear Attribute1LDAPDisplayName, Attribute2LDAPDisplayName

When you use the Add, Remove, Replace, and Clear parameters together, the operations will be performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear


Alias

ninguno

¿Requerido?

false

¿Posición?

named

Valor predeterminado

ninguno

¿Aceptar canalización?

false

¿Aceptar caracteres comodín?

false

-Credential<PSCredential>

Specifies the user account credentials to use to perform this task. The default credentials are the credentials of the currently logged on user unless the cmdlet is run from an Active Directory module for Windows PowerShell provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the default.

To specify this parameter, you can type a user name, such as User1 or Domain01\User01 or you can specify a PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.

You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can then set the Credential parameter to the PSCredential object.

If the acting credentials do not have directory-level permission to perform the task, Active Directory module for Windows PowerShell returns a terminating error.


Alias

ninguno

¿Requerido?

false

¿Posición?

named

Valor predeterminado

ninguno

¿Aceptar canalización?

false

¿Aceptar caracteres comodín?

false

-Description<String>

Specifies a description of the object. This parameter sets the value of the Description property for the object. The LDAP Display Name (ldapDisplayName) for this property is description.


Alias

ninguno

¿Requerido?

false

¿Posición?

named

Valor predeterminado

ninguno

¿Aceptar canalización?

false

¿Aceptar caracteres comodín?

false

-Identity<ADResourcePropertyList>

Specifies an Active Directory object by providing one of the following property values. The identifier in parentheses is the LDAP display name for the attribute. Los valores aceptables para este parámetro son los siguientes:

-- A distinguished name
-- A GUID (objectGUID)

This parameter can also get this object through the pipeline or you can set this parameter to an object instance.


Alias

ninguno

¿Requerido?

true

¿Posición?

1

Valor predeterminado

ninguno

¿Aceptar canalización?

True (ByValue)

¿Aceptar caracteres comodín?

false

-Instance<ADResourcePropertyList>

Specifies an instance of a resource property list object to use as a template for a new resource property list object.

You can use an instance of an existing resource property list object as a template or you can construct a resource property list object by using the Windows PowerShell command line or by using a script.

Method 1: Use an existing resource property list object as a template for a new object. To retrieve an instance of an existing resource property list object, use a cmdlet such as Get-ADResourcePropertyList. Then provide this object to the Instance parameter of the New-ADResourcePropertyList cmdlet to create a new resource property list object. You can override property values of the new object by setting the appropriate parameters.

Method 2: Create a new ADResourcePropertyList and set the property values by using the Windows PowerShell command line interface. Then pass this object to the Instance parameter of the New-ADResourcePropertyList cmdlet to create the new resource property list object.

Note: Specified attributes are not validated, so attempting to set attributes that do not exist or cannot be set will raise an error.


Alias

ninguno

¿Requerido?

true

¿Posición?

named

Valor predeterminado

ninguno

¿Aceptar canalización?

false

¿Aceptar caracteres comodín?

false

-PassThru

Devuelve un objeto que representa el elemento con el que está trabajando. De forma predeterminada, este cmdlet no genera ningún resultado.


Alias

ninguno

¿Requerido?

false

¿Posición?

named

Valor predeterminado

ninguno

¿Aceptar canalización?

false

¿Aceptar caracteres comodín?

false

-ProtectedFromAccidentalDeletion<Boolean>

Specifies whether to prevent the object from being deleted. When this property is set to true, you cannot delete the corresponding object without changing the value of the property. Los valores aceptables para este parámetro son los siguientes:

-- $False or 0
-- $True or 1


Alias

ninguno

¿Requerido?

false

¿Posición?

named

Valor predeterminado

ninguno

¿Aceptar canalización?

false

¿Aceptar caracteres comodín?

false

-Remove<Hashtable>

Specifies that the cmdlet remove values of an object property. Use this parameter to remove one or more values of a property that cannot be modified using a cmdlet parameter. To remove an object property, you must use the LDAP display name. You can remove more than one property by specifying a semicolon-separated list. The format for this parameter is:

-Remove @{Attribute1LDAPDisplayName=value[]; Attribute2LDAPDisplayName=value[]}

When you use the Add, Remove, Replace, and Clear parameters together, the parameters will be applied in the following sequence:

-- Remove
-- Add
-- Replace
-- Clear


Alias

ninguno

¿Requerido?

false

¿Posición?

named

Valor predeterminado

ninguno

¿Aceptar canalización?

false

¿Aceptar caracteres comodín?

false

-Replace<Hashtable>

Specifies values for an object property that will replace the current values. Use this parameter to replace one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:

-Replace @{Attribute1LDAPDisplayName=value[], Attribute2LDAPDisplayName=value[]}

When you use the Add, Remove, Replace, and Clear parameters together, the operations will be performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear


Alias

ninguno

¿Requerido?

false

¿Posición?

named

Valor predeterminado

ninguno

¿Aceptar canalización?

false

¿Aceptar caracteres comodín?

false

-Server<String>

Specifies the AD DS instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: AD LDS, AD DS, or Active Directory snapshot instance.

Specify the AD DS instance in one of the following ways:

Domain name values:

-- Fully qualified domain name
-- NetBIOS name

Directory server values:

-- Fully qualified directory server name
-- NetBIOS name
-- Fully qualified directory server name and port

The default value for this parameter is determined by one of the following methods in the order that they are listed:

-- By using the Server value from objects passed through the pipeline
-- By using the server information associated with the AD DS Windows PowerShell provider drive, when the cmdlet runs in that drive
-- By using the domain of the computer running Windows PowerShell


Alias

ninguno

¿Requerido?

false

¿Posición?

named

Valor predeterminado

ninguno

¿Aceptar canalización?

false

¿Aceptar caracteres comodín?

false

-Confirm

Solicita confirmación antes de ejecutar el cmdlet.


¿Requerido?

false

¿Posición?

named

Valor predeterminado

falso

¿Aceptar canalización?

false

¿Aceptar caracteres comodín?

false

-WhatIf

Muestra lo que sucedería si se ejecutara el cmdlet. El cmdlet no se ejecuta.


¿Requerido?

false

¿Posición?

named

Valor predeterminado

falso

¿Aceptar canalización?

false

¿Aceptar caracteres comodín?

false

<CommonParameters>

Este cmdlet admite los siguientes parámetros comunes: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer y -OutVariable. Para obtener más información, consulte about_CommonParameters (http://go.microsoft.com/fwlink/p/?LinkID=113216).

Entradas

El tipo de entrada es el tipo de los objetos que se pueden canalizar al cmdlet.

  • None or Microsoft.ActiveDirectory.Management.ADClaimTypeList

Salidas

El tipo de resultado es el tipo de objetos que emite el cmdlet.

  • None or Microsoft.ActiveDirectory.Management.ADClaimTypeList

Notas

  • This cmdlet does not work with an Active Directory snapshot.

  • This cmdlet does not work with a read-only domain controller.

Ejemplos

Example 1: Modify a resource property list

This command sets the resource property list named Corporate Resource Property List with the description For corporate documents.


PS C:\> Set-ADResourcePropertyList -Identity "Corporate Resource Property List" -Description "For corporate documents." 

Example 2: Get a resource property list and modify it

This command gets the resource property list named Corporate Resource Property List and then sets its description.


PS C:\> Get-ADResourcePropertyList -Name "Corporate Resource Property List" | Set-ADResourcePropertyList -Description "For corporate documents." 

Temas relacionados

Adiciones de comunidad

AGREGAR
Mostrar: