Set-ADReplicationSite

Se aplica a: Windows 8.1, Windows PowerShell 4.0, Windows Server 2012 R2

Set-ADReplicationSite

Sets the replication properties for an Active Directory site.

Sintaxis

Parameter Set: Identity
Set-ADReplicationSite [-Identity] <ADReplicationSite> [-Add <Hashtable> ] [-AuthType <ADAuthType> {Negotiate | Basic} ] [-AutomaticInterSiteTopologyGenerationEnabled <Boolean> ] [-AutomaticTopologyGenerationEnabled <Boolean> ] [-Clear <String[]> ] [-Credential <PSCredential> ] [-Description <String> ] [-InterSiteTopologyGenerator <ADDirectoryServer> ] [-ManagedBy <ADPrincipal> ] [-PassThru] [-ProtectedFromAccidentalDeletion <Boolean> ] [-RedundantServerTopologyEnabled <Boolean> ] [-Remove <Hashtable> ] [-Replace <Hashtable> ] [-ReplicationSchedule <ActiveDirectorySchedule> ] [-ScheduleHashingEnabled <Boolean> ] [-Server <String> ] [-TopologyCleanupEnabled <Boolean> ] [-TopologyDetectStaleEnabled <Boolean> ] [-TopologyMinimumHopsEnabled <Boolean> ] [-UniversalGroupCachingEnabled <Boolean> ] [-UniversalGroupCachingRefreshSite <ADReplicationSite> ] [-WindowsServer2000BridgeheadSelectionMethodEnabled <Boolean> ] [-WindowsServer2000KCCISTGSelectionBehaviorEnabled <Boolean> ] [-WindowsServer2003KCCBehaviorEnabled <Boolean> ] [-WindowsServer2003KCCIgnoreScheduleEnabled <Boolean> ] [-WindowsServer2003KCCSiteLinkBridgingEnabled <Boolean> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: Instance
Set-ADReplicationSite -Instance <ADReplicationSite> [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Credential <PSCredential> ] [-PassThru] [-Server <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Descripción detallada

The Set-ADReplicationSite cmdlet is used to set the properties for an Active Directory site that is being used for replication. Sites are used in Active Directory to either enable clients to discover network resources (published shares, domain controllers) close to the physical location of a client computer or to reduce network traffic over wide area network (WAN) links. Sites can also be used to optimize replication between domain controllers.

Parámetros

-Add<Hashtable>

Specifies values to add to an object property. Use this parameter to add one or more values to a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can specify multiple values to a property by specifying a comma-separated list of values and more than one property by separating them using a semicolon.. The format for this parameter is:

-Add @{Attribute1LDAPDisplayName=value1, value2, ...; Attribute2LDAPDisplayName=value1, value2, ...; AttributeNLDAPDisplayName=value1, value2, ...}

When you use the Add, Remove, Replace and Clear parameters together, the operations are performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-AuthType<ADAuthType>

Specifies the authentication method to use. Los valores aceptables para este parámetro son los siguientes:

-- Negotiate or 0
-- Basic or 1

The default authentication method is Negotiate.

A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	Microsoft.ActiveDirectory.Management.AuthType.Negotiate
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-AutomaticInterSiteTopologyGenerationEnabled<Boolean>

Indicates whether the cmdlet prevents the Kerberos consistency checker (KCC) that functions as the intersite topology generator (ISTG) from generating connections for intersite replication. Use this option when you want to create manual intersite connections (disable the ISTG) but retain the KCC to generate intrasite connections.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-AutomaticTopologyGenerationEnabled<Boolean>

Indicates whether to enable automatic topology generation. When enabled, prevents the KCC from generating intrasite connections on all servers in the site. Disable this option if you use manual connections and do not want the KCC to build connections automatically.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-Clear<String[]>

Specifies an array of object properties that are cleared in the directory. Use this parameter to clear one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:

-Clear Attribute1LDAPDisplayName, Attribute2LDAPDisplayName

When you use the Add, Remove, Replace, and Clear parameters together, the operations are performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-Credential<PSCredential>

Specifies a user account that has permission to perform this action. The default is the current user.

Type a user name, such as User01 or Domain01\User01, or enter a PSCredential object, such as one generated by the Get-Credential cmdlet. If you type a user name, you will be prompted for a password.

This parameter is not supported by any providers installed with Windows PowerShell.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-Description<String>

Specifies a description of the object. This parameter sets the value of the Description property for the object. The LDAP Display Name (ldapDisplayName) for this property is description.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-Identity<ADReplicationSite>

Specifies an Active Directory object by providing one of the following property values. The identifier in parentheses is the LDAP display name for the attribute. Los valores aceptables para este parámetro son los siguientes:

-- A distinguished name
-- A GUID (objectGUID)

The cmdlet searches the default naming context or partition to find the object. If two or more objects are found, the cmdlet returns a non-terminating error.

This parameter can also get this object through the pipeline or you can set this parameter to an object instance.

Alias	ninguno
¿Requerido?	true
¿Posición?	1
Valor predeterminado	None
¿Aceptar canalización?	True (ByValue)
¿Aceptar caracteres comodín?	false

-Instance<ADReplicationSite>

Specifies an instance of a site object to use as a template for a new site object.

You can use an instance of an existing site object as a template or you can construct a new site object by using the Windows PowerShell command line or by using a script.

Method 1: Use an existing site object as a template for a new object. To retrieve an instance of an existing site object, use a cmdlet such as Get-ADReplicationSite. Then provide this object to the Instance parameter of the New-ADReplicationSite cmdlet to create a new site object. You can override property values of the new object by setting the appropriate parameters.

Method 2: Create a new ADReplicationSite and set the property values by using the Windows PowerShell command line interface. Then pass this object to the Instance parameter of the New-ADReplicationSite cmdlet to create the new Active Directory object.

Note: Specified attributes are not validated, so attempting to set attributes that do not exist or cannot be set will raise an error.

Alias	ninguno
¿Requerido?	true
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-InterSiteTopologyGenerator<ADDirectoryServer>

Specifies the server acting as the inter-site topology generator for this site.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-ManagedBy<ADPrincipal>

Specifies the user or group that manages the object by providing one of the following property values:

-- Distinguished name
-- GUID (objectGUID)
-- Security identifier (objectSid)
-- SAM account name (sAMAccountName)

Note: The identifier in parentheses is the LDAP display name for the property.

This parameter sets the Active Directory attribute with an LDAP display name of managedBy.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-PassThru

Devuelve un objeto que representa el elemento con el que está trabajando. De forma predeterminada, este cmdlet no genera ningún resultado.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-ProtectedFromAccidentalDeletion<Boolean>

Specifies whether to prevent the object from being deleted. When this property is set to $True, you cannot delete the corresponding object without changing the value of the property. Los valores aceptables para este parámetro son los siguientes:

-- $False or 0
-- $True or 1

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-RedundantServerTopologyEnabled<Boolean>

Indicates whether the cmdlet creates redundant connections between sites before a failure takes place. When enabled, disables KCC failover. Requires that automatic detection of failed connections also be disabled (+IS_TOPL_DETECT_STALE_DISABLED).

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-Remove<Hashtable>

Specifies that the cmdlet remove values of an object property. Use this parameter to remove one or more values of a property that cannot be modified using a cmdlet parameter. To remove an object property, you must use the LDAP display name. You can remove more than one property by specifying a semicolon-separated list. The format for this parameter is:

-Remove @{Attribute1LDAPDisplayName=value[]; Attribute2LDAPDisplayName=value[]}

When you use the Add, Remove, Replace, and Clear parameters together, the parameters are applied in the following sequence:

-- Remove
-- Add
-- Replace
-- Clear

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-Replace<Hashtable>

Specifies values for an object property that will replace the current values. Use this parameter to replace one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:

-Replace @{Attribute1LDAPDisplayName=value[], Attribute2LDAPDisplayName=value[]}

When you use the Add, Remove, Replace, and Clear parameters together, the parameters are applied in the following sequence:

-- Remove
-- Add
-- Replace
-- Clear

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-ReplicationSchedule<ActiveDirectorySchedule>

Specifies the default replication schedule for connections within this site (intra-site replication).

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-ScheduleHashingEnabled<Boolean>

Indicates whether the cmdlet spreads replication start times randomly across the entire schedule interval rather than just the first quarter of the interval.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-Server<String>

Specifies the Servicios de dominio de Active Directory (AD DS) instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: Active Directory Lightwight Domain Services (AD LDS), AD DS, or Active Directory snapshot instance.

Specify the AD DS instance in one of the following ways:

Domain name values:

-- Fully qualified domain name
-- NetBIOS name

Directory server values:

-- Fully qualified directory server name
-- NetBIOS name
-- Fully qualified directory server name and port

The default value for this parameter is determined by one of the following methods in the order that they are listed:

-- By using the Server value from objects passed through the pipeline
-- By using the server information associated with the AD DS Windows PowerShell provider drive, when the cmdlet runs in that drive
-- By using the domain of the computer running Windows PowerShell

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-TopologyCleanupEnabled<Boolean>

Indicates whether the cmdlet enables topology cleanup. When enabled, this optional parameter prevents the Kerberos consistency checker (KCC) from removing connection objects that it does not need. Disable this option if you want to take responsibility for removing old redundant connections. Alternatively, to control or augment the topology, you can use manual connections, which the KCC does not delete.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-TopologyDetectStaleEnabled<Boolean>

Indicates whether the cmdlet enables topology detect stale. This parameter option prevents the Kerberos consistency checker (KCC) from excluding servers that are unreachable from the topology; that is, the KCC does use an alternate server to reroute replication. Use this option only if network communication is very unstable and brief outages are expected.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-TopologyMinimumHopsEnabled<Boolean>

Indicates whether the cmdlet enables topology minimium hops. When enabled, this parameter prevents the Kerberos consistency checker (KCC) from generating optimizing connections in the ring topology of intrasite replication. Optimizing connections reduce the replication latency in the site and disabling them is not recommended.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-UniversalGroupCachingEnabled<Boolean>

Indicates whether the cmdlet enables universal group caching. If this parameter is true, it indicates this site caches universal groups, which are those groups cached on global catalog (GC) servers. It can be useful in sites with no GC servers available locally.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-UniversalGroupCachingRefreshSite<ADReplicationSite>

Specifies the name of a site. If universal group caching is enabled, this parameter sets the name of the site from which the cache is pulled.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-WindowsServer2000BridgeheadSelectionMethodEnabled<Boolean>

Indicates whether the cmdlet implements the Windows 2000 Server method of selecting a single bridgehead server per directory partition and transport.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-WindowsServer2000KCCISTGSelectionBehaviorEnabled<Boolean>

Indicates whether the cmdlet implements the Windows 2000 Server method of Intersite Topology Generator (ISTG) selection. By default, it is disabled.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-WindowsServer2003KCCBehaviorEnabled<Boolean>

Indicates whether the cmdlet implements Kerberos consistency checker (KCC) operation that is consistent with Windows Server 2003 forest functional level. This option can be set if all domain controllers in the site are running Windows Server 2003.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-WindowsServer2003KCCIgnoreScheduleEnabled<Boolean>

Indicates whether to ignore schedules. When the forest functional level Windows Server 2003 or Windows Server 2003 interim is in effect, provides KCC control of the ability to ignore schedules (replication occurs at the designated intervals and is always available).

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-WindowsServer2003KCCSiteLinkBridgingEnabled<Boolean>

Indicates whether the cmdlet enables site link bridging. When the forest functional level Windows Server 2003 or Windows Server 2003 interim is in effect, provides Kerberos consistency checker (KCC) control of the ability to enable or disable site link bridging.

Alias	ninguno
¿Requerido?	false
¿Posición?	named
Valor predeterminado	ninguno
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-Confirm

Solicita confirmación antes de ejecutar el cmdlet.

¿Requerido?	false
¿Posición?	named
Valor predeterminado	falso
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

-WhatIf

Muestra lo que sucedería si se ejecutara el cmdlet. El cmdlet no se ejecuta.

¿Requerido?	false
¿Posición?	named
Valor predeterminado	falso
¿Aceptar canalización?	false
¿Aceptar caracteres comodín?	false

<CommonParameters>

Este cmdlet admite los siguientes parámetros comunes: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer y -OutVariable. Para obtener más información, consulte about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Entradas

El tipo de entrada es el tipo de los objetos que se pueden canalizar al cmdlet.

• None or Microsoft.ActiveDirectory.Management.ADReplicationSite

  A site object is received by the Identity parameter.

  A site object that was retrieved by using the Get-ADReplicationSite cmdlet and then modified is received by the Instance parameter.

Salidas

El tipo de resultado es el tipo de objetos que emite el cmdlet.

• None or Microsoft.ActiveDirectory.Management.ADReplicationSite

Ejemplos

Example 1: Set the replication site to prevent connections

The command sets the properties of the site with name NorthAmerica to prevent its intersite topology generator (ISTG) at corp-DC02 from generating connections for intersite replication.

PS C:\> Set-ADReplicationSite -Identity NorthAmerica -InterSiteTopologyGenerator corp-DC02 -AutomaticInterSiteTopologyGenerationEnabled $False

Example 2: Set replication start times for a filtered list of sites

This command returns all the sites in the directory and sets the ScheduleHashingEnabled property to spread replication start times randomly across the entire schedule interval rather than just the first quarter of the interval.

PS C:\> Get-ADReplicationSite -Filter * | % {Set-ADReplicationSite $_ -ScheduleHashingEnabled $True}

Example 3: Set the replication schedule for a site

This example sets the daily replication schedule of the site with name Asia.

PS C:\> $Schedule = New-Object -TypeName System.DirectoryServices.ActiveDirectory.ActiveDirectorySchedule
PS C:\> $Schedule.ResetSchedule()
PS C:\> $Schedule.SetDailySchedule("Twenty","Zero","TwentyTwo","Thirty")
PS C:\> Set-ADReplicationSite -Identity "Asia" -ReplicationSchedule $Schedule

Temas relacionados

Get-ADReplicationSite

New-ADReplicationSite

Remove-ADReplicationSite