Set-RemoteAccessLoadBalancer

Set-RemoteAccessLoadBalancer

Configures load balancing on the Remote Access (RA) server or the cluster server.

Sintaxis

Parameter Set: EnableLoadBalancing
Set-RemoteAccessLoadBalancer [-InternetDedicatedIPAddress] <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-InternalDedicatedIPAddress <String[]> ] [-InternalVirtualIPAddress <String[]> ] [-InternetVirtualIPAddress <String[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-UseThirdPartyLoadBalancer] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: DisableLoadBalancing
Set-RemoteAccessLoadBalancer -Disable [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Force] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ThirdPartyLoadBalancer
Set-RemoteAccessLoadBalancer -ThirdPartyLoadBalancer <String> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Descripción detallada

The Set-RemoteAccessLoadBalancer cmdlet configures load balancing for a Remote Access (RA) deployment.
-- The InternalDedicatedIPAddress and InternalVirtualIPAddress parameters must be specified unless the server is configured with a single network adapter only.
-- If the use of a third-party external load balancer is Enabled, then Windows network load balancing (NLB) is automatically Disabled, otherwise NLB is Enabled.
-- When load balancing is enabled the IP-HTTPS prefix and the IPv6 prefix for VPN must be of length 59 bits. The IP-HTTPS prefix can be configured using the ClientIPv6Prefix parameter in the Set-DAServer cmdlet.
-- All servers in the cluster share the same RA configuration.

Note: If Windows load balancing is used then the Network Load Balancing role (NLB) needs to be installed prior to using this cmdlet.

Parámetros

-AsJob

-CimSession<CimSession[]>

Ejecuta el cmdlet en una sesión remota o en un equipo remoto. Escriba un nombre de equipo o un objeto de sesión, como la salida de un cmdlet New-CimSession o Get-CimSession. El valor predeterminado es la sesión actual en el equipo local.

-ComputerName<String>

Specifies the IPv4 or IPv6 address, or host name, of the server on which the cmdlet runs. If this parameter is specified, then the server is added to the load balanced cluster.

-Disable

Disables load balancing.

-Force

Fuerza que el comando se ejecute sin pedir confirmación al usuario.

-InternalDedicatedIPAddress<String[]>

Specifies one or more IP addresses with subnet masks that will be used as the dedicated IP addresses (DIPs) for load balancing on the internal network adapter.
Specify the IPv4 address and subnet in the format IP_ADDR/SUBNET. For IPv6 specify the prefix length along with the IP address.

-InternalVirtualIPAddress<String[]>

Specifies one or more IP addresses with subnet masks that will be used as the virtual IP addresses (VIPs) for load balancing on the internal network adapter. These are usually the current IP addresses on the internal adapter of the server on which the cmdlet is run.
Specify the IPv4 address and subnet in the format IP_ADDR/SUBNET. For IPv6 specify the prefix length along with the IP address.
If ISATAP is deployed in the internal network, then at least one of the IP addresses specified in this parameter should be present in the ISATAP name entry in DNS.
The NLS should resolve to at least one of the VIPs.

-InternetDedicatedIPAddress<String[]>

Specifies one or more IPv4 or IPv6 addresses with subnet masks that will be used as the DIPs for load balancing on the external network adapter.
Specify the IPv4 address and subnet in the format IP_ADDR/SUBNET. For IPv6 specify the prefix length along with the IP address.

-InternetVirtualIPAddress<String[]>

Specifies one or more IP addresses with subnet masks that will be used as the VIPs for load balancing on the external network adapter and should include the IPsec tunnel endpoint IP addresses on the external adapter.
Specify the IPv4 address and subnet in the format IP_ADDR/SUBNET. For IPv6 specify the prefix length along with the IP address. If ISATAP is deployed in the internal network, then at least one of the IP addresses specified in the parameter should be present in the ISATAP name entry in DNS. If the external adapter VIP addresses are not specified, then by default the IPsec tunnel endpoint IP addresses on the external adapter are used.

-PassThru

Devuelve un objeto que representa el elemento con el que está trabajando. De forma predeterminada, este cmdlet no genera ningún resultado.

-ThirdPartyLoadBalancer<String>

Specifie the enabled state of a third-party external load balancer. Los valores aceptables para este parámetro son los siguientes:
-- Enabled.
-- Disabled.
Note: If external load balancing is Enabled and Teredo has been deployed, then all the external DIPs must be consecutive addresses.

-ThrottleLimit<Int32>

Especifica el número máximo de operaciones simultáneas que se pueden establecer para ejecutar el cmdlet. Si se omite este parámetro o es especifica un valor de 0, Windows PowerShell ® calcula un límite óptimo para el cmdlet en función del número de cmdlets de CIM que se estén ejecutando en el equipo. El límite solo se aplica al cmdlet actual, no a la sesión ni al equipo.

-UseThirdPartyLoadBalancer

Enables use of a third-party external load balancer for cluster traffic.
Note: If external load balancing is enabled and Teredo has been deployed, then all the external DIPs must be consecutive addresses.

-Confirm

Solicita confirmación antes de ejecutar el cmdlet.

-WhatIf

Muestra lo que sucedería si se ejecutara el cmdlet. El cmdlet no se ejecuta.

<CommonParameters>

Este cmdlet admite los siguientes parámetros comunes: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer y -OutVariable. Para obtener más información, consulte about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Entradas

El tipo de entrada es el tipo de los objetos que se pueden canalizar al cmdlet.

• None

Salidas

El tipo de resultado es el tipo de objetos que emite el cmdlet.

• Microsoft.Management.Infrastructure.CimInstance#RemoteAccessLoadBalancer

  El objeto Microsoft.Management.Infrastructure.CimInstance es una clase contenedora que muestra objetos de Instrumental de administración de Windows (WMI). La ruta de acceso después del signo de número (#) proporciona el espacio de nombres y el nombre de clase del objeto WMI subyacente.
  The RemoteAccessLoadBalancer object consists of the following properties:
  The list of nodes in the cluster and the following properties for each node:
  -- IPv4 or IPv6 address or host name of the node.
  -- The load balancing status of each node.
  -- IPv4 address ranges configured on each node for the VPN static pool address assignment.
  -- Status of third party load balancer: Enabled or Disabled.
  -- The list of internet virtual IP addresses.
  -- The list of internal virtual IP addresses.

Ejemplos

EXAMPLE 1

This example sets the NLB settings with Windows load balancer in edge topology. Therefore the Internet address of the existing DA server located at 131.107.0.2 is promoted to be the internet virtual IP address of the load balanced cluster. In this way, clients can still connect to the same external IP that they connected to without bothering about load balancing.

PS C:\> Set-RemoteAccessLoadBalancer -InternetDedicatedIPAddress "131.107.0.20/255.255.255.0" -InternalDedicatedIPAddress @("3ffe::2/64","10.0.0.2/255.255.255.0") -InternetVirtualIPAddress @("131.107.0.5/255.255.255.0","131.107.0.15/255.255.255.0") -InternalVirtualIPAddress @("3ffe::5/64","10.0.0.5/255.255.255.0") -PassThru

EXAMPLE 2

This example sets the NLB settings with Windows load balancer in single network adapter topology. The corporate network is IPv4 and IPv6 enabled and therefore an array containing the IPv4 and IPv6 addresses for internet VIP and DIP is specified. Since the DA server is behind an edge device, the internet VIPs and DIPs contain corporate network addresses.

PS C:\> Set-RemoteAccessLoadBalancer –InternetDedicatedIPAddress @("10.0.0.2/255.255.255.0","3ffe::2/64") –InternetVirtualIPAddress @("10.0.0.5/255.255.255.0", "3ffe::5/64") –PassThru

EXAMPLE 3

This example sets the NLB settings using third party load balancer. The administrator will still have to manually configure the NLB device.

PS C:\> Set-RemoteAccessLoadBalancer -InternetDedicatedIPAddress "131.107.0.20/255.255.255.0" -InternalDedicatedIPAddress @("3ffe::2/64","10.0.0.2/255.255.255.0") -InternetVirtualIPAddress @("131.107.0.5/255.255.255.0","131.107.0.15/255.255.255.0") -InternalVirtualIPAddress @("3ffe::5/64","10.0.0.5/255.255.255.0") -PassThru -UseThirdPartyLoadBalancer

EXAMPLE 4

This example disables the external load balancer for a Windows load balanced cluster. The computer will now use the Windows load balancer to balance the load between servers.

PS C:\> Set-RemoteAccessLoadBalancer -ThirdPartyLoadBalancer Disabled –PassThru

EXAMPLE 5

This example enables the external load balancer for a Windows load balanced cluster. The computer will now use the external load balancer to balance the load between servers.

PS C:\> Set-RemoteAccessLoadBalancer –ThirdPartyLoadBalancer Enabled -PassThru

EXAMPLE 6

This example removes the NLB configuration. DA configuration is also removed from all the servers except the one on which the cmdlet is run.

PS C:\> Set-RemoteAccessLoadBalancer –Disable

Temas relacionados

Add-RemoteAccessLoadBalancerNode

Get-RemoteAccessLoadBalancer

Remove-RemoteAccessLoadBalancerNode

Set-DAServer

Set-RemoteAccessLoadBalancer