New-NetQosPolicy
New-NetQosPolicy
Creates a new network Quality of Service (QoS) policy.
Sintaxis
Parameter Set: ByIP5Tuple
New-NetQosPolicy [-Name] <String> [-AppPathNameMatchCondition <String> ] [-AsJob] [-CimSession <CimSession[]> ] [-DSCPAction <SByte> ] [-IPDstPortEndMatchCondition <UInt16> ] [-IPDstPortMatchCondition <UInt16> ] [-IPDstPortStartMatchCondition <UInt16> ] [-IPDstPrefixMatchCondition <String> ] [-IPProtocolMatchCondition <Protocol> ] [-IPSrcPortEndMatchCondition <UInt16> ] [-IPSrcPortMatchCondition <UInt16> ] [-IPSrcPortStartMatchCondition <UInt16> ] [-IPSrcPrefixMatchCondition <String> ] [-MinBandwidthWeightAction <Byte> ] [-NetworkProfile <NetworkProfile> ] [-PolicyStore <String> ] [-Precedence <UInt32> ] [-PriorityValue8021Action <SByte> ] [-ThrottleLimit <Int32> ] [-ThrottleRateActionBitsPerSecond <UInt64> ] [-UserMatchCondition <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByCluster
New-NetQosPolicy [-Name] <String> -Cluster [-AsJob] [-CimSession <CimSession[]> ] [-DSCPAction <SByte> ] [-MinBandwidthWeightAction <Byte> ] [-NetworkProfile <NetworkProfile> ] [-PolicyStore <String> ] [-Precedence <UInt32> ] [-PriorityValue8021Action <SByte> ] [-ThrottleLimit <Int32> ] [-ThrottleRateActionBitsPerSecond <UInt64> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByDefault
New-NetQosPolicy [-Name] <String> -Default [-AsJob] [-CimSession <CimSession[]> ] [-DSCPAction <SByte> ] [-MinBandwidthWeightAction <Byte> ] [-NetworkProfile <NetworkProfile> ] [-PolicyStore <String> ] [-Precedence <UInt32> ] [-PriorityValue8021Action <SByte> ] [-ThrottleLimit <Int32> ] [-ThrottleRateActionBitsPerSecond <UInt64> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByFCOE
New-NetQosPolicy [-Name] <String> -FCOE -PriorityValue8021Action <SByte> [-AsJob] [-CimSession <CimSession[]> ] [-NetworkProfile <NetworkProfile> ] [-PolicyStore <String> ] [-Precedence <UInt32> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByIPWellKnownPort
New-NetQosPolicy [-Name] <String> -IPPortMatchCondition <UInt16> [-AppPathNameMatchCondition <String> ] [-AsJob] [-CimSession <CimSession[]> ] [-DSCPAction <SByte> ] [-IPProtocolMatchCondition <Protocol> ] [-MinBandwidthWeightAction <Byte> ] [-NetworkProfile <NetworkProfile> ] [-PolicyStore <String> ] [-Precedence <UInt32> ] [-PriorityValue8021Action <SByte> ] [-ThrottleLimit <Int32> ] [-ThrottleRateActionBitsPerSecond <UInt64> ] [-UserMatchCondition <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByISCSI
New-NetQosPolicy [-Name] <String> -iSCSI [-AsJob] [-CimSession <CimSession[]> ] [-DSCPAction <SByte> ] [-MinBandwidthWeightAction <Byte> ] [-NetworkProfile <NetworkProfile> ] [-PolicyStore <String> ] [-Precedence <UInt32> ] [-PriorityValue8021Action <SByte> ] [-ThrottleLimit <Int32> ] [-ThrottleRateActionBitsPerSecond <UInt64> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByLiveMigration
New-NetQosPolicy [-Name] <String> -LiveMigration [-AsJob] [-CimSession <CimSession[]> ] [-DSCPAction <SByte> ] [-MinBandwidthWeightAction <Byte> ] [-NetworkProfile <NetworkProfile> ] [-PolicyStore <String> ] [-Precedence <UInt32> ] [-PriorityValue8021Action <SByte> ] [-ThrottleLimit <Int32> ] [-ThrottleRateActionBitsPerSecond <UInt64> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByNetworkDirectPort
New-NetQosPolicy [-Name] <String> -NetDirectPortMatchCondition <UInt16> -PriorityValue8021Action <SByte> [-AsJob] [-CimSession <CimSession[]> ] [-NetworkProfile <NetworkProfile> ] [-PolicyStore <String> ] [-Precedence <UInt32> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByNFS
New-NetQosPolicy [-Name] <String> -NFS [-AsJob] [-CimSession <CimSession[]> ] [-DSCPAction <SByte> ] [-MinBandwidthWeightAction <Byte> ] [-NetworkProfile <NetworkProfile> ] [-PolicyStore <String> ] [-Precedence <UInt32> ] [-PriorityValue8021Action <SByte> ] [-ThrottleLimit <Int32> ] [-ThrottleRateActionBitsPerSecond <UInt64> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: BySMB
New-NetQosPolicy [-Name] <String> -SMB [-AsJob] [-CimSession <CimSession[]> ] [-DSCPAction <SByte> ] [-MinBandwidthWeightAction <Byte> ] [-NetworkProfile <NetworkProfile> ] [-PolicyStore <String> ] [-Precedence <UInt32> ] [-PriorityValue8021Action <SByte> ] [-ThrottleLimit <Int32> ] [-ThrottleRateActionBitsPerSecond <UInt64> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByURI
New-NetQosPolicy [-Name] <String> -URIMatchCondition <String> [-AsJob] [-CimSession <CimSession[]> ] [-DSCPAction <SByte> ] [-IPDstPrefixMatchCondition <String> ] [-NetworkProfile <NetworkProfile> ] [-PolicyStore <String> ] [-Precedence <UInt32> ] [-ThrottleLimit <Int32> ] [-ThrottleRateActionBitsPerSecond <UInt64> ] [-URIRecursiveMatchCondition <Boolean> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Descripción detallada
The New-NetQosPolicy cmdlet creates a new network Quality of Service (QoS) policy. A QoS policy consists of two main parts: match conditions also known as filters, and actions. Match conditions such as the name by which an application is run in Windows Server® 2012 and later or a TCP port number decide to what traffic the policy is relating. Parameters such as DSCPAction and ThrottleRateAction determine how the policy is to handle the matched traffic. Besides match conditions and actions, there are also some general parameters such as NetworkProfile and Precedence that the users can customize for a QoS policy.
A list of well-known match conditions, or filters, in the form of parameters is provided: FCoE, Cluster (3343),LiveMigration (6600), iSCSI (3260), NFS (2049), and SMB (445). Each of them matches a well-known TCP port specified in the brackets. The only exception is FCoE, which matches EtherType 0x8906. These filters must be used alone for filtering purpose. In other words, they cannot be mixed with other match condition parameters.
QoS policies can be stored in multiple locations. Users can choose a location by specifying the PolicyStore parameter. If the PolicyStore parameter is not specified, then the new policy is added to local computer (localhost). If a policy is stored in ActiveStore, then the policy will not persist after reboot.
Parámetros
-AppPathNameMatchCondition<String>
Specifies the name by which an application is run, such as application.exe or %ProgramFiles%\application.exeapplication.
Alias |
AppPathName,ApplicationName,app |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-AsJob
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-CimSession<CimSession[]>
Ejecuta el cmdlet en una sesión remota o en un equipo remoto. Escriba un nombre de equipo o un objeto de sesión, como la salida de un cmdlet New-CimSession o Get-CimSession. El valor predeterminado es la sesión actual en el equipo local.
Alias |
Session |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-Cluster
Specifies Microsoft’s cluster service, which uses the default SQL server TCP/UDP port 3343.
Alias |
ninguno |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-Default
Specifies a wildcard filter that can be used to capture all traffic that is not matched by any other filter. One use case is that a user can create a QoS policy for a specific application using the AppPathNameMatchCondition parameter and create another QoS policy for all other applications using this parameter. Another use case is that a user can create several QoS policies, each of which specifies a minimum bandwidth action for the filtered traffic, and create one additional policy using this parameter to assign a minimum bandwidth action for all other traffic.
Alias |
ninguno |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-DSCPAction<SByte>
Specifies the differentiated services code point (DSCP) value. Los valores aceptables para este parámetro son los siguientes: 0 through 63.
Alias |
DSCPValue,DSCP |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-FCOE
Specifies the Fibre Channel over Ethernet (FCoE), which uses a dedicated EtherType 0x8914. If this parameter is specified, then the Windows Server® 2012 and later will instruct the network adapters in the computer that support FCoE to match the FCoE packets and apply the action specified in the policy.
Alias |
ninguno |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-IPDstPortEndMatchCondition<UInt16>
Specifies the last port in a range of destination ports to be used to match the network traffic. This parameter must be used in conjunction with the IPDstPortStartMatchCondition parameter. The value of this parameter also must be larger than the value of the IPDstPortStartMatchCondition parameter.
Alias |
IPDstPortEnd |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-IPDstPortMatchCondition<UInt16>
Specifies the exact destination port to be used to match the network traffic. The filter of a QoS policy can be based on either a single port or a range of ports. To specify a single destination port, use this parameter. To specify a range of destination ports, use both the IPDstPortStartMatchCondition and the IPDstPortEndMatchCondition parameters.
Alias |
IPDstPort,DestinationPort,dp,dstport,destport |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-IPDstPortStartMatchCondition<UInt16>
Specifies the first port in a range of destination ports to be used to match the network traffic. This parameter must be used in conjunction with the IPDstPortEndMatchCondition parameter. The value of this parameter also must be smaller than the value of the IPDstPortEndMatchCondition parameter.
Alias |
IPDstPortStart |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-IPDstPrefixMatchCondition<String>
Specifies the destination IP address, optionally with a network prefix, such as 1.2.3.4, 3ffe:ffff::1, 192.168.1.0/24, or fe80::1234/48.
Alias |
IPDstPrefix,DestinationAddress,da,dst,dstaddr,dstip,dest,destaddr,destip |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-IPPortMatchCondition<UInt16>
Specifies the port to be used to match the network traffic, it can be either source port or destination port. If either the source port or the destination port in a packet matches the value of this parameter, then the QoS policy will apply to the packet. Usually this is a well-known port that a client uses to communicate with a server. With this parameter specified, the same QoS policy can be configured on both the clients and the servers and apply to the traffic in both directions. For example, specifying the IPPortMatchCondition parameter value of 80 matches HTTP traffic sent by both HTTP clients and HTTP servers.
Alias |
IPPort,port |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-IPProtocolMatchCondition<Protocol>
Specifies the IP protocol to be used to match the network traffic. Los valores aceptables para este parámetro son los siguientes: TCP, UDP, or Both. If this parameter is unspecified, then Both is the default condition. The QoS policy will apply to both TCP and UDP traffic.
Alias |
IPProtocol,Protocol |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
Both |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-IPSrcPortEndMatchCondition<UInt16>
Specifies the last port in a range of source ports to be used to match the network traffic. This parameter must be used in conjunction with the IPSrcPortStartMatchCondition parameter. The value of this parameter also must be larger than the value of the IPSrcPortStartMatchCondition parameter.
Alias |
IPSrcPortEnd |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-IPSrcPortMatchCondition<UInt16>
Specifies the exact source port to be used to match the network traffic. The filter of a QoS policy can be based on either a single port or a range of ports. To specify a single source port, use this parameter. To specify a range of source ports, use both the IPSrcPortStartMatchCondition and the IPSrcPortEndMatchCondition parameters.
Alias |
IPSrcPort,SourcePort,sp,srcport |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-IPSrcPortStartMatchCondition<UInt16>
Specifies the first port in a range of source ports to be used to match the network traffic. This parameter must be used in conjunction with the IPSrcPortEndMatchCondition parameter. the value of this parameter also must be smaller than the value of the IPSrcPortEndMatchCondition parameter.
Alias |
IPSrcPortStart |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-IPSrcPrefixMatchCondition<String>
Specifies the source IP address, optionally with a network prefix, such as 1.2.3.4, 3ffe:ffff::1, 192.168.1.0/24, or fe80::1234/48.
Alias |
IPSrcPrefix,SourceAddress,sa,src,srcaddr,srcip |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-iSCSI
Specifies the internet small computer system interface (iSCSI), which uses the dedicated TCP port 3260.
Alias |
ninguno |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-LiveMigration
Specifies the Microsoft live migration, which uses the well-known TCP port 6600.
Alias |
ninguno |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-MinBandwidthWeightAction<Byte>
Specifies a numerical value for minimum bandwidth that a flow should get relatively. The actual bandwidth a flow gets will depend on the weights assigned to other flows in the computer. Los valores aceptables para este parámetro son los siguientes: 1 through 100.
Alias |
MinBandwidthWeight,minbww,weight |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-Name<String>
Specifies the QoS policy name. This name must be unique for a QoS policy.
Alias |
ninguno |
¿Requerido? |
true |
¿Posición? |
1 |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-NetDirectPortMatchCondition<UInt16>
Specifies the network direct port to be used to match the network traffic. Network Direct uses an independent port space from the TCP or UDP port space. Windows Server 2012 and later will send a Network Direct policy to a network adapter only if the network adapter supports Network Direct.
Alias |
NetDirectPort,ndport,networkdirectport |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-NetworkProfile<NetworkProfile>
Specifies the profile, or connection type, of a network, such as Domain. Los valores aceptables para este parámetro son los siguientes: Domain, Public, Private, or All. If this parameter is not specified, then the QoS policy will be effective when a computer is connected on any type of connection.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
All |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-NFS
Specifies the network file system, which uses the dedicated TCP port 2049.
Alias |
ninguno |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-PolicyStore<String>
Specifies the location of the policy that is stored. Los valores aceptables para este parámetro son los siguientes:
- ActiveStore
- COMPUTERNAME
- GPO:COMPUTERNAME
- GPO:DOMAIN\GPONAME
- LDAP://LDAP-URL
If a policy is stored in ActiveStore, then the policy will not persist after reboot.
Alias |
store |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-Precedence<UInt32>
Specifies the priority of a QoS policy. A higher priority policy will trump a lower priority policy in case the policies are conflicting. Los valores aceptables para este parámetro son los siguientes: 0 through 255. 255 represents the highest priority and 0 represents the lowest. If not specified, then the default value is 127.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
127 |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-PriorityValue8021Action<SByte>
Specifies the IEEE 802.1p value. Los valores aceptables para este parámetro son los siguientes: 0 through 7.
Alias |
PriorityValue,PriorityValue8021,pri,dot1p |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-SMB
Specifies the server message block, which uses the dedicated TCP port 445.
Alias |
ninguno |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-ThrottleLimit<Int32>
Especifica el número máximo de operaciones simultáneas que se pueden establecer para ejecutar el cmdlet. Si se omite este parámetro o es especifica un valor de 0, Windows PowerShell ® calcula un límite óptimo para el cmdlet en función del número de cmdlets de CIM que se estén ejecutando en el equipo. El límite solo se aplica al cmdlet actual, no a la sesión ni al equipo.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-ThrottleRateActionBitsPerSecond<UInt64>
Specifies a throttle rate in bits per second to set the maximum bandwidth that can be consumed.
Alias |
ThrottleRateAction,ThrottleRate,Throttle,maxbw |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-URIMatchCondition<String>
Specifies the URI to match. Only a HTTP URL is currently supported, such as http://myhost, https://*/training, http://myhost:8080/training, or https://myhost:*/training. The QoS policy will only apply to the traffic sent from HTTP server applications to HTTP clients in response to the requests from the client for the specified URI.
Alias |
URI,url |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-URIRecursiveMatchCondition<Boolean>
Specifies that all subdirectories and files following the URI specified in the URIMatchCondition parameter are to be included. This parameter can be specified only if the URIMatchCondition parameter is specified.
Alias |
URIRecursive,urlrecursive,recursive |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-UserMatchCondition<String>
Specifies the user or group name in Active Directory, such as contoso\User1. This parameter is usually specified with another filtering parameter such as the AppPathNameMatchCondtion cmdlet.
Alias |
User,sid |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-Confirm
Solicita confirmación antes de ejecutar el cmdlet.
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
falso |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-WhatIf
Muestra lo que sucedería si se ejecutara el cmdlet. El cmdlet no se ejecuta.
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
falso |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
<CommonParameters>
Este cmdlet admite los siguientes parámetros comunes: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer y -OutVariable. Para obtener más información, consulte about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Entradas
El tipo de entrada es el tipo de los objetos que se pueden canalizar al cmdlet.
- None
Salidas
El tipo de resultado es el tipo de objetos que emite el cmdlet.
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetQosPolicySettingData
El objeto
Microsoft.Management.Infrastructure.CimInstancees una clase contenedora que muestra objetos de Instrumental de administración de Windows (WMI). La ruta de acceso después del signo de número (#) proporciona el espacio de nombres y el nombre de clase del objeto WMI subyacente.
The MSFT_NetQosPolicySettingData object contains a QoS policy.
Ejemplos
EXAMPLE 1
This example creates a QoS policy named SMB Policy, that classifies SMB traffic and tags it with 802.1p priority value of 3. The SMB parameter is a built-in filter that matches TCP port 445, which is reserved for SMB.
PS C:\> New-NetQosPolicy –Name "SMB Policy" -SMB -PriorityValue8021Action 3
EXAMPLE 2
This example creates a QoS policy named FTP, that matches an application path at ftp.exe and throttles the traffic at 1,000,000 bytes per second. This policy is ActiveStore, meaning that it is not persistent after reboot of the computer.
An alias for the ThrottleRateActionBytesPerSecond parameter is MaxBw.
PS C:\> New-NetQosPolicy –Name "FTP" -AppPathNameMatchCondition ftp.exe -ThrottleRateActionBytesPerSecond 1MB -PolicyStore ActiveStore
EXAMPLE 3
This example creates a QoS policy named Backup, that matches traffic sent to 10.1.1.176/28 subnet and tags it with DSCP value of 40. This policy is effective only on traffic sent on a domain-joined network adapter.
PS C:\> New-NetQosPolicy –Name "Backup" -IPDstPrefixMatchCondition 10.1.1.176/28 -NetworkProfile Domain -DSCPAction 40
EXAMPLE 4
This example creates a QoS policy that matches TCP traffic sent to port 80 and rate-limits it at 10,000,000 bytes per second.
PS C:\> New-NetQosPolicy –Name "HTTP" -IPPort 80 -IPProtocol TCP -ThrottleRateActionBytesPerSecond 10MB
EXAMPLE 5
This example creates a QoS policy named Wildcard, that catches all the traffic that does not match a specific QoS policy and assigns a minimum bandwidth weight of 30 to such traffic.
PS C:\> New-NetQosPolicy –Name "Wildcard" -Default -MinBandwidthWeightAction 30
EXAMPLE 6
This example creates a QoS policy named IIS, that matches return traffic from an HTTP server application with the specified URI and rate limit the return traffic at 500,000 bytes per second.
PS C:\> New-NetQosPolicy –Name "IIS" -URIMatchCondition "http://training" -ThrottleRateActionBytesPerSecond 500KB