Get-NetAdapterAdvancedProperty

Get-NetAdapterAdvancedProperty

Returns the advanced properties for the network adapter.

Syntax

Parameter Set: ByName
Get-NetAdapterAdvancedProperty [[-Name] <String[]> ] [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: ByInstanceID
Get-NetAdapterAdvancedProperty -InterfaceDescription <String[]> [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: ByInstanceIDDisplayName
Get-NetAdapterAdvancedProperty -DisplayName <String[]> -InterfaceDescription <String[]> [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: ByInstanceIDKeyword
Get-NetAdapterAdvancedProperty -InterfaceDescription <String[]> -RegistryKeyword <String[]> [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: ByNameDisplayName
Get-NetAdapterAdvancedProperty [[-Name] <String[]> ] -DisplayName <String[]> [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: ByNameRegistryKeyword
Get-NetAdapterAdvancedProperty [[-Name] <String[]> ] -RegistryKeyword <String[]> [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Detailed Description

The Get-NetAdapterAdvancedProperty cmdlet gets the advanced properties for the network adapter. By default this cmdlet returns advanced properties that have display name values, meaning that these advanced properties are visible in the Advanced pane of the Adapter Properties in the Windows UI. Advanced properties that do not have display names require that the AllProperties parameter is specified. Individual advanced properties can also be selected either by DisplayName or RegistryKeyword parameters. Both of these parameters support the use of wildcard characters. The advanced properties are normally found in the following location in the registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\xxxxxxxx where xxxx is a four character string representing an integer such as 0007. The standardized keywords have a RegistryKeyword name that begins with an asterisk (*). The valid values for these keywords are available by piping the output into the Format-List cmdlet with the ValidDisplayValues or the ValidRegistryValues specified.

Parameters

-AllProperties

Returns all the advanced properties of the network adapter. If this parameter is not specified, then only advanced properties that have a DisplayName parameter are returned.

-AsJob

-CimSession<CimSession[]>

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

-DisplayName<String[]>

Specifies the advanced property name shown in the Advanced tab under the network adapter properties in Windows Server® 2012 and later.

-IncludeHidden

Specifies both visible and hidden network adapters should be included. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.

-InterfaceDescription<String[]>

Specifies the network adapter interface description. For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device.

-Name<String[]>

Specifies the name of the network adapter.

-RegistryKeyword<String[]>

Contains the name of the registry value to be read, such as one of the registry values found in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0007.

-ThrottleLimit<Int32>

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

<CommonParameters>

This cmdlet supports the common parameters: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, and -OutVariable. For more information, see    about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Inputs

The input type is the type of the objects that you can pipe to the cmdlet.

• None

Outputs

The output type is the type of the objects that the cmdlet emits.

• Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapterAdvancedPropertySettingData

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Examples

EXAMPLE 1

This example gets all of the advanced properties that have a display name from all visible network adapters.

PS C:\> Get-NetAdapterAdvancedProperty -Name *

EXAMPLE 2

This example gets all of the advanced properties from all visible network adapters.

PS C:\> Get-NetAdapterAdvancedProperty -Name * -AllProperties

EXAMPLE 3

This example gets all of the advanced properties from all visible network adapters.

PS C:\> Get-NetAdapterAdvancedProperty -Name * -RegistryKeyword *

EXAMPLE 4

This example gets all of the advanced properties from all network adapters.

PS C:\> Get-NetAdapterAdvancedProperty -Name * -AllProperties -IncludeHidden

EXAMPLE 5

This example gets all of the advanced properties from all network adapters.

PS C:\> Get-NetAdapterAdvancedProperty -Name * -RegistryKeyword * -IncludeHidden

EXAMPLE 6

This example gets all of the unformatted, advanced properties from the network adapter named MyAdapter.

PS C:\> Get-NetAdapterAdvancedProperty -Name MyAdapter | Format-List -Property *

EXAMPLE 7

This example gets the advanced properties for network adapters that have a display name that starts with TCP.

PS C:\> Get-NetAdapterAdvancedProperty -Name * | Where-Object –FilterScript { $_.DisplayName -Like "TCP*" }

EXAMPLE 8

This example gets the advanced properties for network adapters that have a display name that starts with Inter.

PS C:\> Get-NetAdapterAdvancedProperty -Name * | Where-Object -FilterScript { $_.DisplayName -Like "Inter*" }

Related topics

New-NetAdapterAdvancedProperty

Remove-NetAdapterAdvancedProperty

Reset-NetAdapterAdvancedProperty

Set-NetAdapterAdvancedProperty

Format-List

Where-Object