New-NetIPsecDospSetting
New-NetIPsecDospSetting
Creates an IPsec DoS protection setting and adds the setting to the target computer.
Sintaxis
Parameter Set: cim:CreateInstance0
New-NetIPsecDospSetting -Name <String> -PrivateInterfaceAliases <WildcardPattern[]> -PublicInterfaceAliases <WildcardPattern[]> [-AsJob] [-CimSession <CimSession[]> ] [-DefBlockExemptDscp <UInt16> ] [-DefBlockExemptRateLimitBytesPerSec <UInt32> ] [-EnabledKeyingModules <DospKeyModules> ] [-FilteringFlags <DospFlags> ] [-IcmpV6Dscp <UInt16> ] [-IcmpV6RateLimitBytesPerSec <UInt32> ] [-IpV6FilterExemptDscp <UInt32> ] [-IpV6FilterExemptRateLimitBytesPerSec <UInt32> ] [-IpV6IPsecAuthDscp <UInt16> ] [-IpV6IPsecAuthRateLimitBytesPerSec <UInt32> ] [-IpV6IPsecUnauthDscp <UInt32> ] [-IpV6IPsecUnauthPerIPRateLimitBytesPerSec <UInt32> ] [-IpV6IPsecUnauthRateLimitBytesPerSec <UInt32> ] [-MaxPerIPRateLimitQueues <UInt32> ] [-MaxStateEntries <UInt32> ] [-PerIPRateLimitQueueIdleTimeoutSeconds <UInt32> ] [-PrivateV6Address <String> ] [-PublicV6Address <String> ] [-StateIdleTimeoutSeconds <UInt32> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Descripción detallada
The New-NetIPsecDospSetting cmdlet creates an IPsec DoS protection setting and adds it to the target computer.
The NetIPsecDospSetting configurations affect only IPv6-based connections that are protected by using Encapsulating Security Payload (ESP), and the IPsec negotiation traffic and ICMPv6 traffic that is required to establish those connections.
Architecturally, the computer on which IPsec Dosp is configured using this cmdlet is located on the network edge and is in the path for any native IPv6 traffic and IPv6 traffic encapsulated inside tunnels such as Teredo, 6to4, and IP-HTTPS. The computer can be the same computer as the Teredo relay, 6to4 gateway or relay, or IP-HTTPS server. In those cases, the IPsec DoS protection feature intercepts the forwarded packets after the packets are extracted from the tunnel. The only exception is that the IPsec DoS protection feature cannot be deployed on an IPsec gateway, because IPsec tunnel traffic bypasses the IPsec DoS protection feature. To protect an IPsec gateway, place the IPsec DoS protection feature on a separate computer that is between the Internet and the IPsec gateway.
By default, no interfaces are assigned to the IPsec DoS protection feature. At least one public interface using the PublicInterfaceAliases parameter and one internal interface using the PrivateInterfaceAliases parameter for the feature must be added to be operational. Those features that are not specified are assigned the default values. By default, AuthIP only is allowed to all internal addresses.
This cmdlet has no effect on existing IPsec connections; it only affects IPsec negotiation traffic that uses IKEv1, IKEv2 or AuthIP. ICMPv6 network traffic is always allowed to enable Teredo and other advanced network scenarios to work.
IPsec-protected traffic that is part of an established connection that uses ESP is always allowed, as long as the connection has not been idle for more than the number of seconds specified with the StateIdleTimeoutSeconds parameter. The DefBlockExemptRateLimitBytesPerSec, IcmpV6RateLimitBytesPerSec, IpV6FilterExemptRateLimitBytesPerSec, IpV6IPsecAuthRateLimitBytesPerSec, IpV6IPsecUnauthPerIPRateLimitBytesPerSec, and IpV6IPsecUnauthRateLimitBytesPerSec parameters limit the rate of inbound traffic of the specified type flowing from the public to the internal interface. You can specify an overall rate for all traffic of a specified type, or you can limit the rate of the specified traffic to a specified IP address.
Note: the following two prerequisite steps must be taken for this cmdlet to succeed.
-- Set-NetIpv4Protocol -CimSession $session -GroupForwardedFragments Enabled$sessionEnabled
-- Set-NetIpv6Protocol -CimSession $session -GroupForwardedFragments Enabled$sessionEnabled
-- New-NetIPsecDospSetting -CimSession $session -Name "Enforce IPsec DoS protection" -PublicInterfaceAliases $publicInterface -PrivateInterfaceAliases $privateInterface$session"Enforce IPsec DoS protection"$publicInterface$privateInterface
Parámetros
-AsJob
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-CimSession<CimSession[]>
Ejecuta el cmdlet en una sesión remota o en un equipo remoto. Escriba un nombre de equipo o un objeto de sesión, como la salida de un cmdlet New-CimSession o Get-CimSession. El valor predeterminado es la sesión actual en el equipo local.
Alias |
Session |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-DefBlockExemptDscp<UInt16>
Specifies the 6-bit value, specified as an integer from 1 to 63, that is placed in the differentiated services code point (DSCP) field of the IPv6 header when the traffic type matches traffic that is by default exempted from the default block behavior such as IPsec authenticated, IPsec unauthenticated, and ICMPv6 traffic. The DSCP value can be used in Quality of Service (QoS) implementations to prioritize network traffic and help ensure that less important network packets do not consume so much bandwidth that they interfere with the successful delivery of more important network packets.
Los valores aceptables para este parámetro son los siguientes: 1 through 63, and Disabled. The default value is Disabled.
-- Disabled: This turns off DSCP marking for traffic that is by default exempted from the default block behavior. This includes IPsec authenticated, IPsec unauthenticated, and ICMPv6 traffic. This parameter is case-sensitive and requires Disabled to be specified using dot-notation.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-DefBlockExemptRateLimitBytesPerSec<UInt32>
Specifies the maximum rate at which IPsec authenticated, IPsec unauthenticated, and ICMPv6 inbound network traffic such as traffic that is by default exempted from the default block behavior is forwarded from the public interface to the internal interface.
Los valores aceptables para este parámetro son los siguientes: 1 through 4,294,967,295 bytes per second.
The default value is 102400.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-EnabledKeyingModules<DospKeyModules>
Specifies the IPsec negotiation protocol, or keying module, to allow. The IPv6 address or subnet to which the specified IPsec negotiation protocol is allowed to be sent with the PrivateV6Address parameter can be optionally specified. By default, only IPsec negotiation traffic that uses AuthIP is allowed to all addresses.
ICMPv6 network traffic is always allowed to enable Teredo and other advanced network scenarios to work. The IPsec-protected traffic that is part of an established connection that uses ESP is always allowed, as long as the connection has not been idle for more than the number of seconds specified with the StateIdleTimeoutSeconds parameter.
Los valores aceptables para este parámetro son los siguientes: None, IkeV1, IkeV2, or AuthIP.
The default value is AuthIP.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-FilteringFlags<DospFlags>
Specifies the action to take on network traffic that matches the Dosp setting address filters the public V6 address and the privateV6 address.
Only one filter can be applied to a specific address or subnet. If a second Dosp setting with the exact same address or subnet parameter is created, then an error is displayed. If an address matches more than one filter, then the most specific match is selected and the corresponding filter is applied. For example, 2006:2006::2 matches a filter with the prefix 2006:2006::2/128 more closely than a filter with the prefix 2006:2006::2/64.
Los valores aceptables para este parámetro son los siguientes:
-- None: IPsec DoS protection feature drops all IPv4 traffic, and all non-IPsec IPv6 traffic (except ICMPv6) that is forwarded between a public interface and an internal interface.
-- DisableDefaultBlock: IPsec DoS protection feature blocks no traffic.
-- FilterBlock: Specifies that network traffic that matches the Dosp setting address filters using the PublicV6Address and PrivateV6Address parameters is blocked even if it is IPsec-protected.
-- FilterExempt: Specifies that IPv6 network traffic that matches the Dosp setting address filters using the PublicV6Address and PrivateV6Address parameters does not have to be IPsec-protected to be allowed through.
The default value is None.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-IcmpV6Dscp<UInt16>
Specifies that ICMPv6 protocol traffic is assigned the given DSCP value.
This parameter specifies the 6-bit value, specified as an integer from 1 to 63, that is placed in the DSCP field of the IPv6 header, when the traffic type matches ICMPv6 protocol traffic. The DSCP value can be used in Quality of Service (QoS) implementations to prioritize network traffic and help ensure that less important network packets do not consume so much bandwidth that the packets interfere with the successful delivery of more important network packets.
Los valores aceptables para este parámetro son los siguientes: 1 through 63, and Disabled.
The default value is Disabled.
-- Disabled: Turns off DSCP marking for ICMPv6 protocol traffic. This parameter is case-sensitive and requires Disabled to be specified using dot-notation.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-IcmpV6RateLimitBytesPerSec<UInt32>
Specifies the maximum rate at which ICMPv6 inbound network traffic is forwarded from the public to the internal interface.
Los valores aceptables para este parámetro son los siguientes: 1 through 4,294,967,295 bytes per second.
The default value is 10240.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-IpV6FilterExemptDscp<UInt32>
Specifies that IPv6 traffic with an IP address that is exempted by using an address filter is assigned the given DSCP value.
To specify that the IPv6 network traffic that matches the Dosp setting address filters using the PublicV6Address and PrivateV6Address parameters does not have to be IPsec-protected to be allowed through set the FilteringFlags parameter to the filter exempt value.
This parameter specifies the 6-bit value, specified as an integer from 1 to 63, that is placed in the DSCP field of the IPv6 header when the traffic type matches the exempted address filter traffic. The DSCP value can be used in Quality of Service (QoS) implementations to prioritize network traffic and help ensure that less important network packets do not consume so much bandwidth that they interfere with the successful delivery of more important network packets.
Los valores aceptables para este parámetro son los siguientes: 1 through 63, and Disabled.
The default value is Disabled.
-- Disabled: Turns off DSCP marking for traffic from the specified address filter, specified with the PrivateV6Address or PublicV6Address parameter. This parameter is case-sensitive and requires Disabled to be specified using dot-notation.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-IpV6FilterExemptRateLimitBytesPerSec<UInt32>
Specifies the maximum rate at which inbound IPv6 network traffic, that is exempted by using an address filter, is forwarded from the public to the internal interface.
To specify that the IPv6 network traffic that matches the Dosp setting address filters using the PublicV6Address and PrivateV6Address parameters does not have to be IPsec-protected to be allowed through set the FilteringFlags parameter to the filter exempt value.
Los valores aceptables para este parámetro son los siguientes: 1 through 4,294,967,295 bytes per second.
The default value is 102400.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-IpV6IPsecAuthDscp<UInt16>
Specifies that authenticated IPv6 IPsec-protected traffic is assigned the given DSCP value.
This parameter specifies the 6-bit value, specified as an integer from 1 to 63, that is placed in the DSCP field of the IPv6 header, when the traffic type matches authenticated IPv6 IPsec-protected traffic. The DSCP value can be used in Quality of Service (QoS) implementations to prioritize network traffic and help ensure that less important network packets do not consume so much bandwidth that they interfere with the successful delivery of more important network packets.
The default value is Disabled.
-- Disabled: Turns off DSCP marking for authenticated IPv6 IPsec-protected traffic. This parameter is case-sensitive and requires Disabled to be specified using dot-notation.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-IpV6IPsecAuthRateLimitBytesPerSec<UInt32>
Specifies the maximum rate at which authenticated IPv6 IPsec-protected inbound traffic is forwarded from the public to the internal interface.
Los valores aceptables para este parámetro son los siguientes: 1 through 4,294,967,295 bytes per second.
The default value is 0, which disables the rate limit for this traffic.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-IpV6IPsecUnauthDscp<UInt32>
Specifies that unauthenticated IPv6 IPsec-protected traffic is assigned the given DSCP value.
This parameter specifies the 6-bit value, specified as an integer from 1 to 63, that is placed in the DSCP field of the IPv6 header when the traffic type matches unauthenticated IPv6 IPsec-protected traffic. The DSCP value can be used in Quality of Service (QoS) implementations to prioritize network traffic and help ensure that less important network packets do not consume so much bandwidth that they interfere with the successful delivery of more important network packets.
Los valores aceptables para este parámetro son los siguientes: 1 through 63, and Disabled.
The default value is Disabled.
-- Disabled: Turns off DSCP marking for unauthenticated IPv6 IPsec-protected traffic. This parameter is case-sensitive and requires Disabled to be specified using dot-notation.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-IpV6IPsecUnauthPerIPRateLimitBytesPerSec<UInt32>
Specifies the maximum rate at which unauthenticated IPv6 IPsec-protected inbound traffic is forwarded from the public to the internal interface.
If a per IP address rate limit is defined, then it is used instead of the global rate limit using the IpV6IPsecUnauthRateLimitBytesPerSec parameter. To rate limit on a per IP address basis, configure the number of per IP queues to support this by using the MaxPerIPRateLimitQueues parameter.
Los valores aceptables para este parámetro son los siguientes: 1 through 4,294,967,295 bytes per second.
The default value is 10240.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-IpV6IPsecUnauthRateLimitBytesPerSec<UInt32>
Specifies the maximum rate at which unauthenticated IPv6 IPsec-protected inbound traffic is forwarded from the public to the internal interface. This rate limit is applied on a per IP address basis, instead of network-wide.
If a per IP address rate limit is defined using the IpV6IPsecUnauthPerIPRateLimitBytesPerSec parameter, then it is used instead of the global rate limit. To rate limit on a per IP address basis, configure the number of per IP queues to support this by using the MaxPerIPRateLimitQueues parameter.
Los valores aceptables para este parámetro son los siguientes: 1 through 4,294,967,295 bytes per second.
The default value is 10240.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-MaxPerIPRateLimitQueues<UInt32>
When using rate limits on unauthenticated traffic, this value specifies the maximum number of queues that can be used to hold traffic while it is delivered at the configured rate.
The per IP address rate limit is defined with the IpV6IPsecUnauthPerIPRateLimitBytesPerSec parameter.
Los valores aceptables para este parámetro son los siguientes: 1 through 4,294,967,295 queues.
The default value is 50000.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-MaxStateEntries<UInt32>
Specifies the maximum number of connections that the IPsec DoS protection feature can track at one time.
Los valores aceptables para este parámetro son los siguientes: 1 through 4,294,967,295 sessions.
The default value is 75000.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-Name<String>
Specifies the unique identifier of the Dosp configuration setting. This parameter is mandatory.
Alias |
ninguno |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-PerIPRateLimitQueueIdleTimeoutSeconds<UInt32>
Specifies, when using rate limits on unauthenticated traffic on a per IP address basis, the timeout in seconds that the connection can be idle before the IPsec DoS protection feature treats the connection as stale and stops tracking the state.
The per IP address rate limit is defined with the IpV6IPsecUnauthPerIPRateLimitBytesPerSec parameter.
Los valores aceptables para este parámetro son los siguientes: 1 through 4,294,967,295 seconds.
The default value is 360, or six minutes.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-PrivateInterfaceAliases<WildcardPattern[]>
Adds the specified interface to the IPsec DoS protection configuration as an internal interface.
At least one public interface using the PublicInterfaceAliases parameter and one internal interface using the PrivateInterfaceAliases parameter for the Dosp setting must be set to be operational.
Alias |
ninguno |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-PrivateV6Address<String>
Specifies the internal IPsec address or subnet that matches the Dosp address filter.
This parameter adds a filter that either blocks or allows via exempting the network traffic that is not IPv6 and IPsec-protected from the specified public address or subnet using the PublicV6Address parameter to the specified internal address or subnet using this parameter. This behavior, referring to blocking or exempting, is specified with the FilteringFlags parameter.
Only one filter can be applied to a specific address or subnet. If a second rule with the exact same address or subnet parameter is created, then an error is displayed. If an address matches more than one filter, then the most specific match is selected and the corresponding filter is applied. For example, 2006:2006::2 matches a filter with the prefix 2006:2006::2/128 more closely than a filter with the prefix 2006:2006::2/64. If both the PublicV6Address parameter and this parameter are specified, then the Dosp rule treats the parameter values as a logical AND operator. Traffic matches the rule if it comes from an address with the specified public prefix and the traffic is destined for an address with the specified internal prefix.
Network traffic of the specified protocol as specified using the EnabledKeyingModules parameter that is sent from an address or subnet not on the list is dropped. To specify a subnet, include the forward slash (/) followed by the number of digits that represent the network identifier.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-PublicInterfaceAliases<WildcardPattern[]>
Adds the specified interface to the IPsec DoS protection configuration as a public interface.
At least one public interface using the PublicInterfaceAliases parameter and one internal interface using the PrivateInterfaceAliases parameter for the Dosp setting must be added to be operational.
Alias |
ninguno |
¿Requerido? |
true |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-PublicV6Address<String>
Specifies the external IPsec address or subnet that matches the Dosp address filter.
This parameter adds a filter that either blocks or allows via exempting the network traffic that is not IPv6 and IPsec-protected from the specified public address or subnet using this parameter to the specified internal address or subnet using the PrivateV6Address parameter. This behavior, referring to blocking or exempting, is specified with the FilteringFlags parameter.
Only one filter can be applied to a specific address or subnet. If a second rule with the exact same address or subnet parameter is created, then an error is displayed. If an address matches more than one filter, then the most specific match is selected and the corresponding filter is applied. For example, 2006:2006::2 matches a filter with the prefix 2006:2006::2/128 more closely than a filter with the prefix 2006:2006::2/64. If both this parameter and thePrivateV6Address parameter are specified, then the Dosp rule treats the parameter values as a logical AND operator. Traffic matches the rule if it comes from an address with the specified public prefix and the traffic is destined for an address with the specified internal prefix.
Network traffic of the specified protocol as specified using the EnabledKeyingModules parameter that is sent from an address or subnet not on the list is dropped. To specify a subnet, include the forward slash (/) followed by the number of digits that represent the network identifier.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-StateIdleTimeoutSeconds<UInt32>
Specifies the number of seconds that an IPsec session can be idle before the IPsec DoS protection feature stops considering it to be a valid IPsec-protected connection that is allowed by the feature. After the specified number of seconds, the IPsec session is considered stale, and traffic that is part of the session is no longer allowed through the feature by default.
Los valores aceptables para este parámetro son los siguientes: 1 through 4,294,967,295 seconds.
The default value is 360, or six minutes.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-ThrottleLimit<Int32>
Especifica el número máximo de operaciones simultáneas que se pueden establecer para ejecutar el cmdlet. Si se omite este parámetro o es especifica un valor de 0, Windows PowerShell ® calcula un límite óptimo para el cmdlet en función del número de cmdlets de CIM que se estén ejecutando en el equipo. El límite solo se aplica al cmdlet actual, no a la sesión ni al equipo.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-Confirm
Solicita confirmación antes de ejecutar el cmdlet.
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
falso |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-WhatIf
Muestra lo que sucedería si se ejecutara el cmdlet. El cmdlet no se ejecuta.
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
falso |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
<CommonParameters>
Este cmdlet admite los siguientes parámetros comunes: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer y -OutVariable. Para obtener más información, consulte about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Entradas
El tipo de entrada es el tipo de los objetos que se pueden canalizar al cmdlet.
- None
Salidas
El tipo de resultado es el tipo de objetos que emite el cmdlet.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\NetIPsecDospSetting[]
El objeto
Microsoft.Management.Infrastructure.CimInstancees una clase contenedora que muestra objetos de Instrumental de administración de Windows (WMI). La ruta de acceso después del signo de número (#) proporciona el espacio de nombres y el nombre de clase del objeto WMI subyacente.
Ejemplos
EXAMPLE 1
This example adds the public and internal network adapters as interfaces of the IPsec DoS protection feature.
PS C:\> New-NetIPsecDospSetting –Name PubNet-CorpNet -PublicInterfaceAliases PubNet –PrivateInterfaceAliases CorpNet
EXAMPLE 2
This example enables IKEv1 negotiation traffic to all IPv6 addresses.
PS C:\> New-NetIPsecDospSetting –Name IKEv1-PubNet-CorpNet –PublicInterfaceAliases PubNet –PrivateInterfaceAliases CorpNet –EnabledKeyingModules IKEv1
EXAMPLE 3
This example enables IKEv1 negotiation traffic to a single IPv6 addresses.
PS C:\> New-NetIPsecDospSetting –Name "IKEv1-PubNet-CorpNet-3ff3:401d:1f00:baa::1" –PublicInterfaceAliases PubNet –PrivateInterfaceAliases CorpNet –EnabledKeyingModules IKEv1 –Privatev6Address 3ff3:401d:1f00:baa::1
EXAMPLE 4
This example blocks all network traffic, even IPsec-protected traffic from the specified public IPv6 subnet.
PS C:\> New-NetIPsecDospSetting –Name "Block-3ffe:401d:1f00::/64-PubNet-CorpNet" –PublicInterfaceAliases PubNet –PrivateInterfaceAliases CorpNet -FilteringFlags FilterBlock –Publicv6Address 3ff3:401d:1f00:baa::1
EXAMPLE 5
This example marks all unauthenticated IPsec traffic with the value of 10.
PS C:\> New-NetIPsecDospSetting –Name PubNet-CorpNet-Unauth10 –PublicInterfaceAliases PubNet –PrivateInterfaceAliases CorpNet -IpV6IPsecUnauthDscp 10
EXAMPLE 6
This example limits all IPsec unauthenticated network traffic to 2048 bytes per second.
PS C:\> New-NetIPsecDospSetting –Name PubNet-CorpNet –PublicInterfaceAliases PubNet –PrivateInterfaceAliases CorpNet -IpV6IPsecUnauthRateLimitBytesPerSec 2048
EXAMPLE 7
This example configures the IPsec DoS protection feature to stop tracking a connection after it is idle for 480 seconds, and to track a maximum of 100,000 connections.
PS C:\> New-NetIPsecDospSetting –Name PubNet-CorpNet –PublicInterfaceAliases PubNet –PrivateInterfaceAliases CorpNet -StateIdleTimeoutSeconds 480 –MaxStateEntries 100000