Update-NetIPsecRule

Update-NetIPsecRule

Updates an IPsec rule by adding or removing a set of IP addresses.

Sintaxis

Parameter Set: InputObject (cdxml)
Update-NetIPsecRule -Action <ChangeAction> -EndpointType <EndpointType> -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-IPv4Addresses <String[]> ] [-IPv6Addresses <String[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: Query (cdxml)
Update-NetIPsecRule -Action <ChangeAction> -EndpointType <EndpointType> -IPsecRuleName <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-IPv4Addresses <String[]> ] [-IPv6Addresses <String[]> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Descripción detallada

The Update-NetIPsecRule cmdlet adds or deletes IP addresses for an IPsec rule.

This cmdlet can get an IPsec rule to be updated using parameter values including IPsecRuleName (default), DisplayName, rule properties, or by associated NetFirewall filters or NetIPsec objects. The resultant queried IP addresses of the rule are updated with an Add or Delete as specified by the Action parameter.

If the Get-DAPolicyChange cmdlet is run, then the Windows PowerShell® script (.ps1) that is generated contains instances of this cmdlet. If the Windows PowerShell script (.ps1) is run, then the IPsec rules are updated in the appropriate policy stores. See the Get-DAPolicyChange cmdlet for more information.

Parámetros

-Action<ChangeAction>

Specifies that the specified addresses should be added or deleted for an IPsec rule. Los valores aceptables para este parámetro son los siguientes: Add or Delete.

-AsJob

-CimSession<CimSession[]>

Ejecuta el cmdlet en una sesión remota o en un equipo remoto. Escriba un nombre de equipo o un objeto de sesión, como la salida de un cmdlet New-CimSession o Get-CimSession. El valor predeterminado es la sesión actual en el equipo local.

-EndpointType<EndpointType>

Specifies that the local or remote endpoint should be modified by adding or removing IP addresses. Los valores aceptables para este parámetro son los siguientes: Endpoint1 or Endpoint2. Endpoint1 or Endpoint2 corresponds to the local address or remote address for the IPsec rule.

-GPOSession<String>

Specifies the network GPO from which to retrieve the rules to be updated.
This parameter is used in the same way as the PolicyStore parameter. When modifying GPOs in Windows PowerShell®, each change to a GPO requires the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back. This reduces the load on the DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO Session, use the Save-NetGPO cmdlet.

-InputObject<CimInstance[]>

Especifica la entrada para este cmdlet. Puede usar este parámetro o puede canalizar la entrada a este cmdlet.

-IPsecRuleName<String[]>

Specifies that only matching IPsec rules of the indicated name are updated. Wildcard characters are accepted.
This parameter acts just like a file name, in that only one rule with a given name may exist in a policy store at a time. During group policy processing and policy merge, rules that have the same name but come from multiple stores being merged, will overwrite one another so that only one exists. This overwriting behavior is desirable if the rules serve the same purpose. For instance, all of the firewall rules have specific names, so if an administrator can copy these rules to a GPO, and the rules will override the local versions on a local computer. GPOs can have precedence. So if an administrator has a different or more specific rule with the same name in a higher-precedence GPO, then it overrides other rules that exist.
The default value is a randomly assigned value.
When the defaults for main mode encryption need to overridden, specify the customized parameters and set this parameter, making it the new default setting for encryption.

-IPv4Addresses<String[]>

Specifies the list of IPv4 addresses that are updated with this cmdlet. The list contains IPv4 addresses that are being added or removed from an IPsec rule.

-IPv6Addresses<String[]>

Specifies the list of IPv6 addresses that are updated with this cmdlet. The list contains IPv6 addresses that are being added or removed from an IPsec rule.

-PassThru

Devuelve un objeto que representa el elemento con el que está trabajando. De forma predeterminada, este cmdlet no genera ningún resultado.

-PolicyStore<String>

Specifies the policy store from which to retrieve the rules to be updated.
A policy store is a container for firewall and IPsec policy.
Los valores aceptables para este parámetro son los siguientes:
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from GPOs, and has been created manually or programmatically (during application installation) on the computer. Rules created in this store are attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the PersistentStore, the static Windows service hardening (WSH), and the configurable WSH).
---- GPOs are also policy stores. Computer GPOs can be specified as follows.
------ –PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ –PolicyStore domain.fqdn.com\GPO_Friendly_Namedomain.fqdn.comGPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetIPsecRule cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy store at creation time with the Copy-NetIPsecRule cmdlet or with the New-NetIPsecRule cmdlet.

-ThrottleLimit<Int32>

Especifica el número máximo de operaciones simultáneas que se pueden establecer para ejecutar el cmdlet. Si se omite este parámetro o es especifica un valor de 0, Windows PowerShell ® calcula un límite óptimo para el cmdlet en función del número de cmdlets de CIM que se estén ejecutando en el equipo. El límite solo se aplica al cmdlet actual, no a la sesión ni al equipo.

-Confirm

Solicita confirmación antes de ejecutar el cmdlet.

-WhatIf

Muestra lo que sucedería si se ejecutara el cmdlet. El cmdlet no se ejecuta.

<CommonParameters>

Este cmdlet admite los siguientes parámetros comunes: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer y -OutVariable. Para obtener más información, consulte about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Entradas

El tipo de entrada es el tipo de los objetos que se pueden canalizar al cmdlet.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetConSecRule[]

  El objeto Microsoft.Management.Infrastructure.CimInstance es una clase contenedora que muestra objetos de Instrumental de administración de Windows (WMI). La ruta de acceso después del signo de número (#) proporciona el espacio de nombres y el nombre de clase del objeto WMI subyacente.

Salidas

El tipo de resultado es el tipo de objetos que emite el cmdlet.

• None

Ejemplos

EXAMPLE 1

This example adds a list of IP addresses to an IPsec rule in a specific GPO.

PS C:\> $IPv4list = 2.1.1.1,2.1.1.2

PS C:\> $IPv6list = fefe:fefe::1,fefe:fefe::2

PS C:\> Update-NetIPsecRule –IPsecRuleName "IPsec Rule" –Action Add -IPv4addresses $IPv4list –IPv6addresses $IPv6list –EndpointType Endpoint2 –PolicyStore domain.contoso.com/sample_gpo

Temas relacionados

Get-NetFirewallAddressFilter

Get-NetFirewallInterfaceFilter

Get-NetFirewallInterfaceTypeFilter

Get-NetFirewallPortFilter

Get-NetFirewallProfile

Get-NetIPsecPhase1AuthSet

Get-NetIPsecPhase2AuthSet

Get-NetIPsecQuickModeCryptoSet

New-NetIPsecQuickModeCryptoSet

New-NetIPsecRule

Open-NetGPO

Save-NetGPO

Set-NetIPsecRule

Get-DAPolicyChange

New-GPO