Get-DhcpServerv6FreeIPAddress
Get-DhcpServerv6FreeIPAddress
Gets one or more free, or unassigned, IPv6 addresses from the specified scope.
Sintaxis
Parameter Set: Get0
Get-DhcpServerv6FreeIPAddress [-Prefix] <IPAddress> [[-NumAddress] <UInt32> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-EndAddress <IPAddress> ] [-StartAddress <IPAddress> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Descripción detallada
The Get-DhcpServerv6FreeIPAddress cmdlet gets one or more free IPv6 addresses from the specified scope.
If the NumAddress parameter is specified, then the requested number of free IPv6 addresses are returned. If the NumAddress parameter is not specified, then a single free IPv6 address will be returned. The maximum number of free IPv6 addresses returned is capped at 1024
.
If the StartAddress parameter is specified and the EndAddress parameter is not specified, then the free IPv6 addresses starting from the specified StartAddress parameter value through the ending of the IPv6 address range of the scope are returned.
If the EndAddress parameter is specified and the StartAddress parameter is not specified, then the free IPv6 addresses starting from the beginning of the IPv6 address range of the scope through the specified EndAddress parameter value are returned.
If both of the StartAddress and EndAddress parameters are specified, then the free IPv6 addresses between the specified StartAddress and EndAddress parameter values are returned.
The exclusion address ranges, reservations, active, offered and bad, or declined, leases are excluded while returning free IPv6 addresses.
The IPv6 address ranges associated with a policy will be included while returning free IPv6 addresses.
The IPv6 addresses which are in expired, or doomed, state will be included while returning free IPv6 addresses.
If the requested number of free IPv6 addresses could not be found, then a warning is displayed.
Parámetros
-AsJob
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-CimSession<CimSession[]>
Ejecuta el cmdlet en una sesión remota o en un equipo remoto. Escriba un nombre de equipo o un objeto de sesión, como la salida de un cmdlet New-CimSession o Get-CimSession. El valor predeterminado es la sesión actual en el equipo local.
Alias |
Session |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-ComputerName<String>
Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the Dynamic Host Configuration Protocol (DHCP) server service.
Alias |
Cn |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-EndAddress<IPAddress>
Specifies the ending IPv6 address of the range from which the free IPv6 addresses are to be returned.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-NumAddress<UInt32>
Specifies the number of free IPv6 addresses requested.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
3 |
Valor predeterminado |
1 |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-Prefix<IPAddress>
Specifies the IPv6 subnet prefix of the scope from which one or more free IPv6 addresses are requested.
Alias |
ninguno |
¿Requerido? |
true |
¿Posición? |
2 |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-StartAddress<IPAddress>
Specifies the starting IPv6 address of the range from which the free IPv6 addresses are to be returned.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-ThrottleLimit<Int32>
Especifica el número máximo de operaciones simultáneas que se pueden establecer para ejecutar el cmdlet. Si se omite este parámetro o es especifica un valor de 0
, Windows PowerShell ® calcula un límite óptimo para el cmdlet en función del número de cmdlets de CIM que se estén ejecutando en el equipo. El límite solo se aplica al cmdlet actual, no a la sesión ni al equipo.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
<CommonParameters>
Este cmdlet admite los siguientes parámetros comunes: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer y -OutVariable. Para obtener más información, consulte about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Entradas
El tipo de entrada es el tipo de los objetos que se pueden canalizar al cmdlet.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv6Scope
El objeto
Microsoft.Management.Infrastructure.CimInstance
es una clase contenedora que muestra objetos de Instrumental de administración de Windows (WMI). La ruta de acceso después del signo de número (#
) proporciona el espacio de nombres y el nombre de clase del objeto WMI subyacente.
Salidas
El tipo de resultado es el tipo de objetos que emite el cmdlet.
- System.String[]
Ejemplos
EXAMPLE 1
This example gets a free IPv6 address from the specified scope.
PS C:\> Get-DhcpServerv6FreeIPAddress -ComputerName dhcpserver.contoso.com -Prefix 2001:4898:7020:1020::
EXAMPLE 2
This example gets a list of 10 free IPv6 addresses from the specified scope.
PS C:\> Get-DhcpServerv6FreeIPAddress -ComputerName dhcpserver.contoso.com -Prefix 2001:4898:7020:1020:: -NumAddress 10
EXAMPLE 3
This example gets a free IPv6 address from the specified scope within the IP address range from 2001:4898:7020:1020::10 through 2001:4898:7020:1020::50.
PS C:\> Get-DhcpServerv6FreeIPAddress -ComputerName dhcpserver.contoso.com -Prefix 2001:4898:7020:1020:: -StartAddress 2001:4898:7020:1020::10 -EndAddress 2001:4898:7020:1020::50