Add-DhcpServerInDC
Add-DhcpServerInDC
Adds the computer running the DHCP server service to the list of authorized Dynamic Host Configuration Protocol (DHCP) server services in Active Directory (AD).
Sintaxis
Parameter Set: Add0
Add-DhcpServerInDC [[-DnsName] <String> ] [[-IPAddress] <IPAddress> ] [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Descripción detallada
The Add-DhcpServerInDC cmdlet adds the computer running the DHCP server service to the list of authorized Dynamic Host Configuration Protocol (DHCP) server services in the Active Directory (AD). A DHCP server service running on a domain joined computer needs to be authorized in AD so that it can start leasing IP addresses on the network.
If neither the DnsName nor the IPAddress parameter is specified, the local server will be added in the AD.
If only the DnsName parameter is specified, the specified Domain Name System (DNS) name will be added in AD.
In both these cases, any of the IP addresses of the computer running the DHCP server service being added into the domain controller are added as part of the server object in AD.
If the DnsName and the IPAddress parameter are specified, the object will be added to domain controller with specified values.
In addition to adding the computer running the DHCP server service in DC, this cmdlet also triggers the DHCP server service to perform an authorization check.
The trigger for authorization check will be done even if the addition of computer running the DHCP server service fails with an object already exists error.
The following warning will be displayed if the computer running the DHCP server service is already authorized and the trigger for the server authorization check succeeded:
- The DHCP server is already authorized in Active Directory. The authorization check on the DHCP server has been initiated.
The following warning will be displayed if the computer running the DHCP server service is already authorized, but the trigger for the server authorization check failed:
- The DHCP server is already authorized in Active Directory. Failed to initiate the authorization check on the DHCP server. Error code: %d
The following warning will be displayed if the addition of the computer running the DHCP server service in AD succeeded, but the trigger for the server authorization check failed:
- The DHCP server has been successfully authorized in Active Directory. Failed to initiate the authorization check on the DHCP server. Error code: %d
If the addition of computer running the DHCP server service to AD fails with an error other than object_already_exists_error, then an error is returned and authorization check on the server is not triggered.
Parámetros
-AsJob
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-CimSession<CimSession[]>
Ejecuta el cmdlet en una sesión remota o en un equipo remoto. Escriba un nombre de equipo o un objeto de sesión, como la salida de un cmdlet New-CimSession o Get-CimSession. El valor predeterminado es la sesión actual en el equipo local.
Alias |
Session |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-DnsName<String>
Specifies the DNS name of the computer running the DHCP server service to be added to the list of authorized DHCP server services in AD.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
2 |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-IPAddress<IPAddress>
Specifies the IP address of the computer running the DHCP server service which is added to the list of authorized DHCP server services in AD.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
3 |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
True (ByPropertyName) |
¿Aceptar caracteres comodín? |
false |
-PassThru
Devuelve un objeto que representa el elemento con el que está trabajando. De forma predeterminada, este cmdlet no genera ningún resultado.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-ThrottleLimit<Int32>
Especifica el número máximo de operaciones simultáneas que se pueden establecer para ejecutar el cmdlet. Si se omite este parámetro o es especifica un valor de 0
, Windows PowerShell ® calcula un límite óptimo para el cmdlet en función del número de cmdlets de CIM que se estén ejecutando en el equipo. El límite solo se aplica al cmdlet actual, no a la sesión ni al equipo.
Alias |
ninguno |
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
ninguno |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-Confirm
Solicita confirmación antes de ejecutar el cmdlet.
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
falso |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
-WhatIf
Muestra lo que sucedería si se ejecutara el cmdlet. El cmdlet no se ejecuta.
¿Requerido? |
false |
¿Posición? |
named |
Valor predeterminado |
falso |
¿Aceptar canalización? |
false |
¿Aceptar caracteres comodín? |
false |
<CommonParameters>
Este cmdlet admite los siguientes parámetros comunes: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer y -OutVariable. Para obtener más información, consulte about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Entradas
El tipo de entrada es el tipo de los objetos que se pueden canalizar al cmdlet.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerInDC
El objeto
Microsoft.Management.Infrastructure.CimInstance
es una clase contenedora que muestra objetos de Instrumental de administración de Windows (WMI). La ruta de acceso después del signo de número (#
) proporciona el espacio de nombres y el nombre de clase del objeto WMI subyacente.
Salidas
El tipo de resultado es el tipo de objetos que emite el cmdlet.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerInDC
El objeto
Microsoft.Management.Infrastructure.CimInstance
es una clase contenedora que muestra objetos de Instrumental de administración de Windows (WMI). La ruta de acceso después del signo de número (#
) proporciona el espacio de nombres y el nombre de clase del objeto WMI subyacente.
Ejemplos
EXAMPLE 1
This example adds an object in the AD domain for the DHCP server service running on the computer with the DNS name dhcpserver.contoso.com and the IP address 10.10.10.2, and authorizes the DHCP server service to serve DHCP clients on the network.
PS C:\> Add-DhcpServerInDC -DnsName dhcpserver.contoso.com -IPAddress 10.10.10.2
EXAMPLE 2
This example adds an object in the AD domain for the DHCP server service running on the computer with the DNS name dhcpserver.contoso.com, and authorizes the DHCP server service to serve DHCP clients on the network. The IP address for the DHCP server service object in AD will be obtained by looking up dhcpserver.contoso.com in DNS.
PS C:\> Add-DhcpServerInDC -DnsName dhcpserver.contoso.com
EXAMPLE 3
This example adds an object in the AD domain for the DHCP server service running on the local computer. The IP address for the computer running the DHCP server service in AD will be obtained by looking up the hostname of the local computer in DNS.
PS C:\> Add-DhcpServerInDC