Add Edge Server IP Options

 

Última modificación del tema:2012-10-17

Microsoft Lync Server 2013 allows you to configure IPv4 and IPv6 addresses for each interface for the Servidor perimetral and Grupo de servidores perimetrales. To do this, you do the following:

  • Enable IPv4 on internal interface : Select the check box if you want to apply an IPv4 address to the Servidor perimetral or Grupo de servidores perimetrales internal interface

  • Enable IPv6 on internal interface : Select the check box if you want to apply an IPv6 address to the Servidor perimetral or Grupo de servidores perimetrales internal interface

  • Enable IPv4 on external interface : Select the check box if you want to apply an IPv4 address to the Servidor perimetral or Grupo de servidores perimetrales external interface

  • Enable IPv6 on external interface : Select the check box if you want to apply an IPv6 address to the Servidor perimetral or Grupo de servidores perimetrales external interface

You can also configure the Servidor perimetral or Grupo de servidores perimetrales to use a network address translation address for the external IP addresses. You do this by selecting the check box The external IP address of this Edge pool is translated by NAT .

NAT support. Network address translation (NAT) is not supported when you are using hardware load balancing, so do not select the NAT option if you are deploying an Edge Server pool with hardware load balancing.

 
Mostrar: