Edit Edge Settings Expander for Lync Server 2010

 

Última modificación del tema:2012-11-14

You edit the settings for the Servidor perimetral or Grupo de servidores perimetrales by configuring the following properties:

General

  • Internal pool FQDN : The internal pool fully qualified domain name is the identity of the Servidor perimetral or Grupo de servidores perimetrales as defined in the domain name system (DNS) host (A or AAAA for IPv6) record.

  • Select Enable federation for this Edge pool (port 5061) if you want to enable the Servidor perimetral or Grupo de servidores perimetrales for federation with other session initiation protocol partners.

    importantImportante:
    You can only define one Servidor perimetral or Grupo de servidores perimetrales actively for federation. The configuration shown in the associated screen shot indicates that another Servidor perimetral or Grupo de servidores perimetrales is already configured for federation. The external DNS SRV record for federation (_sipfederationtls._tcp.<external domain name>) will point to the Servidor perimetral or Grupo de servidores perimetrales for federation.
  • The Internal Configuration Replication Port (HTTPS) , by default at TCP port 4443, is the port that the local (that is, local to the Servidores perimetrales) copy of the Almacén de administración central is replicated over. The local copy of the Almacén de administración central is in the RTCLOCAL database in the SQL Server on each computer. The replication is one-way, initiated from the Servidor de administración central (or, the Servidor front-end or Grupo de servidores front-end that holds the Servidor de administración central role) to the Servidores perimetrales and is an internal interface port.

Next hop selection

  • Select for the list your Next hop pool . You define either a Director, Grupo de directores, Servidor front-end or Grupo de servidores front-end to assume this role. The next hop pool is the server or server pool that will accept inbound SIP messages from the Servidor perimetral or Grupo de servidores perimetrales internal interface and send outbound SIP to the Edge internal interface.

    noteNota:
    The Director is an optional role and if you decide not to deploy Directores, the Servidores front-end (single computer or pool) will assume the Director role.

External settings

This section of the properties allows you to edit properties for the external settings of the Servidor perimetral or Grupo de servidores perimetrales. The following properties are available to edit:

  • Select the Enable separate FQDN and IP address for web conferencing and A/V check box if you want to assign distinct IP addresses and fully qualified domain names to each Servidor perimetral service.

    noteNota:
    If you choose to not select the check box, you must use separate ports for each Edge service. Each Edge service will share the FQDN defined for the Servidor perimetral de acceso, and will therefore use the same IP address. Each Edge service must be uniquely identified by either a distinct IP address and same port, or the same IP address and unique port values.
  • Select A/V Edge service is NAT enabled if you want to configure the Servicio perimetral A/V to use a private address or other address that will be hidden behind a network address translation (NAT) device.

  • To edit the Access Edge service , you define the Pool FQDN for the Servidor perimetral de acceso as defined in DNS by host (A, and AAAA if IPv6 is used) records and a port value

  • To edit the Web Conferencing Edge service , you define a Pool FQDN for the Servicio perimetral de conferencia web as defined in DNS by host (A, and AAAA if IPv6 is used) records and a port value

  • To edit the A/V Edge service , you define a Pool FQDN for the Servicio perimetral A/V as defined in DNS by host (A, and AAAA if IPv6 is used) records and a port value

    importantImportante:
    If you have selected the Enable separate FQDN and IP address for web conferencing and A/V check box, only the Servidor perimetral de acceso Pool FQDN will be available for editing. Assign distinct ports for each of the three Edge services.

OK Accepts and commits changes to the dialog.

Cancel Discards changes and closes the dialog.

Help Displays this help screen.

 
Mostrar: