Add-NlbClusterVip

Windows Server 2012 R2 and Windows 8.1

Add-NlbClusterVip

Adds a virtual IP address to a Network Load Balancing (NLB) cluster.

Syntaxe

Parameter Set: NonPipeline
Add-NlbClusterVip [-IP] <IPAddress> -InterfaceName <String> [-HostName <String> ] [-SubnetMask <IPAddress> ] [ <CommonParameters>]

Parameter Set: Pipeline
Add-NlbClusterVip [-IP] <IPAddress> -InputObject <Cluster[]> [-SubnetMask <IPAddress> ] [ <CommonParameters>]




Description détaillée

The Add-NlbClusterVIP cmdlet adds a virtual IP address to a Network Load Balancing (NLB) cluster. The virtual IP address will appear on all hosts in the cluster. This IP address is used to address the cluster as a whole, and it should be the IP address that maps to the full Internet name that you specify for the cluster.

This cmdlet changes the configuration on all cluster nodes. As a result, the NLB cluster will have to restart the convergence process on all nodes to guarantee that configuration changes have been applied on all nodes and that a consistent state is reached. Any additional operations on the NLB cluster should not be initiated until all cluster nodes have completed the convergence process and are back to the converged state.

Paramètres

-HostName<String>

Specifies the name of the cluster host against which this cmdlet is run. If this parameter is omitted or a value of . is entered, then the local cluster is assumed.


Alias

Host,HN,H

Obligatoire ?

false

Position ?

named

Valeur par défaut

none

Accepter l’entrée de pipeline ?

false

Accepter les caractères génériques ?

false

-IP<IPAddress>

Specifies the IP address of the new cluster to which the virtual IP address is added.


Alias

none

Obligatoire ?

true

Position ?

1

Valeur par défaut

none

Accepter l’entrée de pipeline ?

false

Accepter les caractères génériques ?

false

-InputObject<Cluster[]>

Specifies the cluster to which the cluster virtual IP address is added.


Alias

none

Obligatoire ?

true

Position ?

named

Valeur par défaut

none

Accepter l’entrée de pipeline ?

True (ByValue, ByPropertyName)

Accepter les caractères génériques ?

false

-InterfaceName<String>

Specifies the interface to which NLB is bound. This is the interface of the cluster against which this cmdlet is run.


Alias

Interface,IN,I

Obligatoire ?

true

Position ?

named

Valeur par défaut

none

Accepter l’entrée de pipeline ?

false

Accepter les caractères génériques ?

false

-SubnetMask<IPAddress>

Specifies the subnet mask for the virtual IP address of the new cluster.


Alias

none

Obligatoire ?

false

Position ?

named

Valeur par défaut

none

Accepter l’entrée de pipeline ?

false

Accepter les caractères génériques ?

false

<CommonParameters>

Cette applet de commande prend en charge les paramètres courants : -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer et -OutVariable. Pour plus d’informations, consultez about_CommonParameters (http://go.microsoft.com/fwlink/p/?LinkID=113216).

Entrées

Le type d’entrée correspond au type des objets que vous pouvez transmettre à l’applet de commande.

  • Microsoft.NetworkLoadBalancingClusters.PowerShell.Cluster

Sorties

Le type de sortie est le type des objets émis par l’applet de commande.

  • Microsoft.NetworkLoadBalancingClusters.PowerShell.ClusterVip

Exemples

EXAMPLE 1

This example adds an IPv6 IP address to the list of virtual NLB cluster IP addresses on the network interface vlan-3.


PS C:\> Add-NlbClusterVip -IP fe80::94dc:5e59:3626:f1d4 -InterfaceName vlan-3

EXAMPLE 2

This example adds an IPv6 IP address to the list of virtual NLB cluster IP addresses on the local cluster.


PS C:\> Get-NlbCluster | Add-NlbClusterVip -IP fe80::94dc:5e59:3626:f1d4

Rubriques connexes

Ajouts de la communauté

AJOUTER
Afficher: