Add-NlbClusterVip
Add-NlbClusterVip
Adds a virtual IP address to a Network Load Balancing (NLB) cluster.
Syntaxe
Parameter Set: NonPipeline
Add-NlbClusterVip [-IP] <IPAddress> -InterfaceName <String> [-HostName <String> ] [-SubnetMask <IPAddress> ] [ <CommonParameters>]
Parameter Set: Pipeline
Add-NlbClusterVip [-IP] <IPAddress> -InputObject <Cluster[]> [-SubnetMask <IPAddress> ] [ <CommonParameters>]
Description détaillée
The Add-NlbClusterVIP cmdlet adds a virtual IP address to a Network Load Balancing (NLB) cluster. The virtual IP address will appear on all hosts in the cluster. This IP address is used to address the cluster as a whole, and it should be the IP address that maps to the full Internet name that you specify for the cluster.
This cmdlet changes the configuration on all cluster nodes. As a result, the NLB cluster will have to restart the convergence process on all nodes to guarantee that configuration changes have been applied on all nodes and that a consistent state is reached. Any additional operations on the NLB cluster should not be initiated until all cluster nodes have completed the convergence process and are back to the converged state.
Paramètres
-HostName<String>
Specifies the name of the cluster host against which this cmdlet is run. If this parameter is omitted or a value of . is entered, then the local cluster is assumed.
Alias |
Host,HN,H |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-IP<IPAddress>
Specifies the IP address of the new cluster to which the virtual IP address is added.
Alias |
none |
Obligatoire ? |
true |
Position ? |
1 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-InputObject<Cluster[]>
Specifies the cluster to which the cluster virtual IP address is added.
Alias |
none |
Obligatoire ? |
true |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByValue, ByPropertyName) |
Accepter les caractères génériques ? |
false |
-InterfaceName<String>
Specifies the interface to which NLB is bound. This is the interface of the cluster against which this cmdlet is run.
Alias |
Interface,IN,I |
Obligatoire ? |
true |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-SubnetMask<IPAddress>
Specifies the subnet mask for the virtual IP address of the new cluster.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
<CommonParameters>
Cette applet de commande prend en charge les paramètres courants : -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer et -OutVariable. Pour plus d’informations, consultez about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Entrées
Le type d’entrée correspond au type des objets que vous pouvez transmettre à l’applet de commande.
- Microsoft.NetworkLoadBalancingClusters.PowerShell.Cluster
Sorties
Le type de sortie est le type des objets émis par l’applet de commande.
- Microsoft.NetworkLoadBalancingClusters.PowerShell.ClusterVip
Exemples
EXAMPLE 1
This example adds an IPv6 IP address to the list of virtual NLB cluster IP addresses on the network interface vlan-3.
PS C:\> Add-NlbClusterVip -IP fe80::94dc:5e59:3626:f1d4 -InterfaceName vlan-3
EXAMPLE 2
This example adds an IPv6 IP address to the list of virtual NLB cluster IP addresses on the local cluster.
PS C:\> Get-NlbCluster | Add-NlbClusterVip -IP fe80::94dc:5e59:3626:f1d4