Gestion des services et des paramètres réseau à l'aide du fournisseur WMI

Exemple

Pour utiliser un exemple de code fourni, vous devrez sélectionner l'environnement, le modèle et le langage de programmation dans lequel créer votre application. Pour plus d'informations, consultez « Procédure : créer un projet Visual Basic SMO dans Visual Studio .NET » ou « Procédure : créer un projet Visual C# SMO dans Visual Studio .NET » dans la documentation en ligne de SQL Server.

Pour les programmes qui utilisent le fournisseur WMI SQL Server, vous devez inclure l'instruction Imports pour qualifier l'espace de noms WMI. Insérez l'instruction après les autres instructions Imports, avant toute autre déclaration dans l'application, par exemple :

Imports Microsoft.SqlServer.Management.Smo

Imports Microsoft.SqlServer.Management.Common

Imports Microsoft.SqlServer.Management.Smo.Wmi

Arrêt et redémarrage du service Microsoft SQL Server pour l'instance de SQL Server en Visual Basic

Cet exemple de code montre comment arrêter et redémarrer les services en utilisant l'objet SMO ManagedComputer. Ceci fournit une interface au fournisseur WMI pour la gestion de la configuration.

'Declare and create an instance of the ManagedComputer object that represents the WMI Provider services.
Dim mc As ManagedComputer
mc = New ManagedComputer()
'Iterate through each service registered with the WMI Provider.
Dim svc As Service
For Each svc In mc.Services
    Console.WriteLine(svc.Name)
Next
'Reference the Microsoft SQL Server service.
svc = mc.Services("MSSQLSERVER")
'Stop the service if it is running and report on the status continuously until it has stopped.
If svc.ServiceState = ServiceState.Running Then
    svc.Stop()

    Console.WriteLine(String.Format("{0} service state is {1}", svc.Name, svc.ServiceState))
    Do Until String.Format("{0}", svc.ServiceState) = "Stopped"
        Console.WriteLine(String.Format("{0}", svc.ServiceState))
        svc.Refresh()
    Loop
    Console.WriteLine(String.Format("{0} service state is {1}", svc.Name, svc.ServiceState))
    'Start the service and report on the status continuously until it has started.
    svc.Start()
    Do Until String.Format("{0}", svc.ServiceState) = "Running"
        Console.WriteLine(String.Format("{0}", svc.ServiceState))
        svc.Refresh()
    Loop
    Console.WriteLine(String.Format("{0} service state is {1}", svc.Name, svc.ServiceState))

Else
    Console.WriteLine("SQL Server service is not running.")
End If

Activation d'un protocole serveur à l'aide d'une chaîne URN en Visual Basic

L'exemple de code montre comment identifier un protocole serveur à l'aide d'un objet URN, puis activer le protocole.

'This program must run with administrator privileges.
        'Declare the ManagedComputer WMI interface.
        Dim mc As New ManagedComputer()

        'Create a URN object that represents the TCP server protocol.
        Dim u As New Urn("ManagedComputer[@Name='V-ROBMA3']/ServerInstance[@Name='MSSQLSERVER']/ServerProtocol[@Name='Tcp']")

        'Declare the serverProtocol variable and return the ServerProtocol object.
        Dim sp As ServerProtocol
        sp = mc.GetSmoObject(u)

        'Enable the protocol.
        sp.IsEnabled = True

        'propagate back to the service
        sp.Alter()

Activation d'un protocole serveur à l'aide d'une chaîne URN dans PowerShell

L'exemple de code montre comment identifier un protocole serveur à l'aide d'un objet URN, puis activer le protocole.

#This example shows how to identify a server protocol using a URN object, and then enable the protocol
#This program must run with administrator privileges.

#Load the assembly containing the classes used in this example
[reflection.assembly]::LoadWithPartialName("Microsoft.SqlServer.SqlWmiManagement")


#Get a managed computer instance
$mc = New-Object -TypeName Microsoft.SqlServer.Management.Smo.Wmi.ManagedComputer

#Create a URN object that represents the TCP server protocol
#Change 'MyPC' to the name of the your computer 
$urn = New-Object -TypeName Microsoft.SqlServer.Management.Sdk.Sfc.Urn -argumentlist "ManagedComputer[@Name='MyPC']/ServerInstance[@Name='MSSQLSERVER']/ServerProtocol[@Name='Tcp']"

#Get the protocol object
$sp = $mc.GetSmoObject($urn)

#enable the protocol on the object
$sp.IsEnabled = $true

#propagate back to actual service
$sp.Alter()

Démarrage et arrêt d'un service en Visual C#

L'exemple de code indique comment arrêter et démarrer une instance de SQL Server.

{ 
   //Declare and create an instance of the ManagedComputer 
   //object that represents the WMI Provider services. 
   ManagedComputer mc; 
   mc = new ManagedComputer(); 
   //Iterate through each service registered with the WMI Provider. 
  
   foreach (Service svc in mc.Services)
   { 
      Console.WriteLine(svc.Name); 
   } 
//Reference the Microsoft SQL Server service. 
  Service Mysvc = mc.Services["MSSQLSERVER"]; 
//Stop the service if it is running and report on the status
// continuously until it has stopped. 
   if (Mysvc.ServiceState == ServiceState.Running) { 
      Mysvc.Stop(); 
      Console.WriteLine(string.Format("{0} service state is {1}", Mysvc.Name, Mysvc.ServiceState)); 
      while (!(string.Format("{0}", Mysvc.ServiceState) == "Stopped")) { 
         Console.WriteLine(string.Format("{0}", Mysvc.ServiceState)); 
          Mysvc.Refresh(); 
      } 
      Console.WriteLine(string.Format("{0} service state is {1}", Mysvc.Name, Mysvc.ServiceState)); 
//Start the service and report on the status continuously 
//until it has started. 
      Mysvc.Start(); 
      while (!(string.Format("{0}", Mysvc.ServiceState) == "Running")) { 
         Console.WriteLine(string.Format("{0}", Mysvc.ServiceState)); 
         Mysvc.Refresh(); 
      } 
      Console.WriteLine(string.Format("{0} service state is {1}", Mysvc.Name, Mysvc.ServiceState));
      Console.ReadLine();
   } 
   else { 
      Console.WriteLine("SQL Server service is not running.");
      Console.ReadLine();
   } 
}

Démarrage et arrêt d'un service dans PowerShell

L'exemple de code indique comment arrêter et démarrer une instance de SQL Server.

#Load the assembly containing the objects used in this example
[reflection.assembly]::LoadWithPartialName("Microsoft.SqlServer.SqlWmiManagement")

#Get a managed computer instance
$mc = New-Object -TypeName Microsoft.SqlServer.Management.Smo.Wmi.ManagedComputer

#List out all sql server instnces running on this mc
foreach ($Item in $mc.Services){$Item.Name}

#Get the default sql server datbase engine service
$svc = $mc.Services["MSSQLSERVER"]

# for stopping and starting services PowerShell must run as administrator

#Stop this service
$svc.Stop()
$svc.Refresh()
while ($svc.ServiceState -ne "Stopped")
{
$svc.Refresh()
$svc.ServiceState
}
"Service" + $svc.Name + " is now stopped"
"Starting " + $svc.Name
$svc.Start()
$svc.Refresh()
while ($svc.ServiceState -ne "Running")
{
$svc.Refresh()
$svc.ServiceState
}
$svc.ServiceState
"Service" + $svc.Name + "is now started"

Voir aussi

Concepts