Add-DnsServerResponseRateLimitingExceptionlist

Mis à jour: mai 2015

Add-DnsServerResponseRateLimitingExceptionlist

Adds an RRL exception list on the DNS server.

Syntaxe

Parameter Set: Add0
Add-DnsServerResponseRateLimitingExceptionlist [[-Name] <String> ] [[-ClientSubnet] <String> ] [[-Fqdn] <String> ] [[-ServerInterfaceIP] <String> ] [[-Condition] <String> {AND | OR} ] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-InformationAction <ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]

Description détaillée

The Add-DnsServerResponseRateLimiting cmdlet adds a Response Rate Limiting (RRL) exception list on the DNS server. The RRL exception list indicates that responses to queries for specified Fully Qualified Domain Names (FQDNs), queries originating from specified client subnets, queries received on specified server interfaces, or any combination of these values, are exempt from RRL.

Paramètres

-CimSession<CimSession[]>

Exécute l'applet de commande dans une session distante ou sur un ordinateur distant. Entrez un nom d'ordinateur ou un objet de session, tels que le résultat d'une applet de commande New-CimSession ou Get-CimSession. La valeur par défaut est la session en cours sur l'ordinateur local.

-ClientSubnet<String>

Specifies the client subnet values for the exception list.

This parameter must have the following format: COMPARATOR, value1, value2,..., COMPARATOR, value 3, value 4,.. where the COMPARATOR can be EQ or NE. There can be only one EQ and one NE in a value.

The values following the EQ operator will be treated as multiple assertions which are logically combined using the OR operator. The values following the NE operator will be treated as multiple assertions which are logically differenced using the AND operator.

Multiple values are combined using the Condition parameter as a logical operator. The same operator is also used for combining EQ and NE expressions within a value.

For example, EQ, America, Asia, NE, Europe specifies that the client subnets of America and Asia are in the exception list, and the client subnet of Europe is not.

For details, see Add-DnsServerClientSubnet.

-ComputerName<String>

Specifies a remote DNS server on which to run the command. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NetBIOS name.

-Condition<String>

Specifies a logical operator for combining multiple values of the ClientSubnet, Fdqn and ServerIp parameters. The values for the parameters are combined using the Condition parameter as a logical operator. The same operator is also used for combining EQ and NE expressions within a value. The default value is AND.

-Fqdn<String>

Specifies FQDN values for the exception list.

The value must have the following format: COMPARATOR, value1, value2,..., COMPARATOR, value 3, value 4,.. where the COMPARATOR can be EQ or NE. There can be only one EQ and one NE in a value.

The values following the EQ operator will be treated as multiple assertions which are logically combined using the OR operator. The values following the NE operator will be treated as multiple assertions which are logically differenced using the AND operator.

Multiple values are combined using the Condition parameter as a logical operator. The same operator is also used for combining EQ and NE expressions within a value.

For example, EQ,*.contoso.com specifies that the contoso.com domain should be added to the exception list.

-InformationAction<ActionPreference>

Specifies how this cmdlet responds to an information event. Les valeurs acceptables pour ce paramètre sont les suivantes : 

-- SilentlyContinue
-- Stop
-- Continue
-- Inquire
-- Ignore
-- Suspend

-InformationVariable<String>

Specifies a variable in which to store an information event message.

-Name<String>

Specifies the name of the RRL exception list.

-PassThru

Renvoie un objet qui représente l'élément sur lequel vous travaillez. Par défaut, cette applet de commande ne génère pas de sortie.

-ServerInterfaceIP<String>

Specifies the server interface on which the DNS server is listening.

The value must have the following format: COMPARATOR, value1, value2,..., COMPARATOR, value 3, value 4,.. where the COMPARATOR can be EQ or NE. There can be only one EQ and one NE in a value.

The values following the EQ operator are treated as multiple assertions which are logically combined using the OR operator. The values following the NE operator are treated as multiple assertions which are logically differenced using the AND operator.

Multiple values are combined using the Condition parameter as a logical operator. The same operator is also used for combining EQ and NE expressions within a value.

For example, EQ,10.0.0.3 specifies that all queries received on a server interface that has the IP address of 10.0.0.3 should be exempt from RRL.

-ThrottleLimit<Int32>

Spécifie le nombre maximal d'opérations simultanées qui peuvent être établies pour exécuter l'applet de commande. Si ce paramètre est omis ou si la valeur 0 est entrée, Windows PowerShell® calcule un seuil de limitation optimal pour l'applet de commande en fonction du nombre d'applets de commande CIM exécutées sur l'ordinateur. Le seuil de limitation s'applique uniquement à l'applet de commande en cours, non pas à la session ou à l'ordinateur.

-Confirm

Vous invite à confirmer l'exécution de l'applet de commande.

-WhatIf

Indique ce qui se produit en cas d'exécution de l'applet de commande. L'applet de commande n'est pas exécutée.

<CommonParameters>

Cette applet de commande prend en charge les paramètres courants : -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer et -OutVariable. Pour plus d'informations, consultez  . about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

<WorkflowParameters>

Entrées

Le type d'entrée correspond au type des objets que vous pouvez adresser à l'applet de commande.

Sorties

Le type de sortie correspond au type des objets que l'applet de commande émet.

• Microsoft.Management.Infrastructure.CimInstance#DnsServerResponseRateLimitingExceptionlist

  L'objet Microsoft.Management.Infrastructure.CimInstance est une classe de wrapper qui affiche les objets WMI (Windows Management Instrumentation). Le chemin après le symbole # fournit l'espace de noms et le nom de classe de l'objet WMI sous-jacent.

Exemples

Example 1: Add a domain to an RRL exception list

This command adds an RRL exception for the domain contoso.com.

PS C:\> Add-DnsServerResponseRateLimitingExceptionlist -Name "SafeList1" -Fqdn "EQ,*.contoso.com"                        

Rubriques connexes

Add-DnsServerClientSubnet

Get-DnsServerResponseRateLimitingExceptionlist

Set-DnsServerResponseRateLimiting

Set-DnsServerResponseRateLimitingExceptionlist