Table of contents
TLS
TOC
Collapse the table of content
Expand the table of content

Set-DhcpServerv4Scope

Last Updated: 2/14/2017

SYNOPSIS

Sets the properties of an existing IPv4 scope on the DHCP server service.

SYNTAX

WithoutRange (Default)

Set-DhcpServerv4Scope [-ActivatePolicies <Boolean>] [-PassThru] [-Type <String>] [-ScopeId] <IPAddress>
 [-Description <String>] [-LeaseDuration <TimeSpan>] [-Name <String>] [-NapEnable <Boolean>]
 [-NapProfile <String>] [-Delay <UInt16>] [-State <String>] [-SuperscopeName <String>] [-ComputerName <String>]
 [-MaxBootpClients <UInt32>] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [-WhatIf]
 [-Confirm] [<CommonParameters>]

WithRange

Set-DhcpServerv4Scope [-ActivatePolicies <Boolean>] [-PassThru] [-Type <String>] [-ScopeId] <IPAddress>
 [-Description <String>] [-LeaseDuration <TimeSpan>] [-Name <String>] [-NapEnable <Boolean>]
 [-NapProfile <String>] [-Delay <UInt16>] [-State <String>] [-SuperscopeName <String>] [-ComputerName <String>]
 [-MaxBootpClients <UInt32>] -StartRange <IPAddress> -EndRange <IPAddress> [-CimSession <CimSession[]>]
 [-ThrottleLimit <Int32>] [-AsJob] [-WhatIf] [-Confirm] [<CommonParameters>]

DESCRIPTION

The Set-DhcpServerv4Scope cmdlet sets the properties of an existing IPv4 scope on the Dynamic Host Configuration Protocol (DHCP) server service.

EXAMPLES

Example 1: Set values for a scope

PS C:\> Set-DhcpServerv4Scope -ComputerName "dhcpserver.contoso.com" -ScopeId 10.10.10.0 -Name "Ext Lab Net VLAN100" -State Active -LeaseDuration 4.00:00:00

This example sets the name of the specified DHCPv4 scope to Ext Lab Net VLAN100, activates the scope, and sets the lease duration to 4 days.

PARAMETERS

-ActivatePolicies

Specifies the enabled state for the policy enforcement on the scope.

Type: Boolean
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet. For more information about Windows PowerShell® background jobs, see about_Jobs.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type: CimSession[]
Parameter Sets: (All)
Aliases: Session

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ComputerName

Specifies the DNS name, or IPv4 or IPv6 address, of the target computer that runs the DHCP server service.

Type: String
Parameter Sets: (All)
Aliases: Cn

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf

Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

-Delay

Specifies the time, in milliseconds, by which the DHCP server service should delay sending a response to the clients. This parameter should be used on the secondary DHCP server service in a split scope configuration.

Type: UInt16
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-Description

Specifies the description to set for the scope.

Type: String
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-EndRange

Specifies the ending address of the IPv4 range to set for the scope. If a new IPv4 range is being set, then the previously set IPv4 range of the scope is discarded.

Type: IPAddress
Parameter Sets: WithRange
Aliases: 

Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-LeaseDuration

Specifies the duration of the IPv4 address lease to give for the clients of the scope.

Type: TimeSpan
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-MaxBootpClients

Specifies the maximum number of Bootp clients permitted to get an IP address lease from the scope. This parameter can only be used if the Type parameter value is Both.

Type: UInt32
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-Name

Specifies the name for the scope.

Type: String
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-NapEnable

Specifies the enabled state for network access protection (NAP) for the scope.

Type: Boolean
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-NapProfile

Specifies the name of the NAP profile for clients in the scope. The NAP profile refers to the Microsoft Service Class which is a condition used in network policies on the network policy server (NPS). This parameter can only be used if the NapEnable parameter value is $True.

Type: String
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ScopeId

Specifies the scope identifier (ID), in IPv4 address format, for which the properties are set.

Type: IPAddress
Parameter Sets: (All)
Aliases: 

Required: True
Position: 1
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-StartRange

Specifies the starting address of the IPv4 range to set for the scope. If a new IP range is being set, the previously set IP range of the scope is discarded.

Type: IPAddress
Parameter Sets: WithRange
Aliases: 

Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-State

Specifies the state of the scope. The acceptable values for this parameter are: Active and InActive.

Type: String
Parameter Sets: (All)
Aliases: 
Accepted values: Active, InActive

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-SuperscopeName

Specifies the name of the superscope to which this scope is added.

Type: String
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type: Int32
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Type

Specifies the type of the scope. The acceptable values for this parameter are: DHCP, BootP, and Both. The type of the scope determines if the DHCP server service responds to only DHCP client requests, only BootP client requests, or Both types of clients.

Type: String
Parameter Sets: (All)
Aliases: 
Accepted values: Dhcp, Bootp, Both

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi

Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

CommonParameters

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

INPUTS

Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv4Scope

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

OUTPUTS

Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv4Scope

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

NOTES

Add-DhcpServerv4Scope

Get-DhcpServerv4Scope

Get-DhcpServerv4ScopeStatistics

Remove-DhcpServerv4Scope

© 2017 Microsoft