Set-DhcpServerv6OptionValue

Sets an IPv6 option value at the server, scope, or reservation level.

Syntax

Set-DhcpServerv6OptionValue
   [-PassThru]
   [-Force]
   [[-Prefix] <IPAddress>]
   [-UserClass <String>]
   [-ComputerName <String>]
   [-ReservedIP <IPAddress>]
   [-Value] <String[]>
   [-OptionId] <UInt32>
   [-VendorClass <String>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-DhcpServerv6OptionValue
   [-PassThru]
   [-Force]
   [[-Prefix] <IPAddress>]
   [-UserClass <String>]
   [-DnsServer <IPAddress[]>]
   [-DomainSearchList <String[]>]
   [-InfoRefreshTime <UInt32>]
   [-ComputerName <String>]
   [-ReservedIP <IPAddress>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Set-DhcpServerv6OptionValue cmdlet sets an IPv6 option value at the server, scope, or reservation level. The definition for the option must already exist on the Dynamic Host Configuration Protocol (DHCP) server service. If you specify the ReservedIP parameter, the option values are set at the reservation level. If you specify only the Prefix parameter, the option values are set at the scope level. If you specify neither the Prefix nor ReservedIP parameter, the option values are set at the server level. The Prefix and ReservedIP parameters cannot both be specified.

If you specify the VendorClass parameter, this cmdlet sets the option value for the specified vendor class. If you specify the UserClass parameter, this cmdlet sets the option value for the specified user class.

Examples

Example 1: Set server level option values

PS C:\> Set-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -DnsServer 2001:4898:7020:1020::2 -DomainSearchList "contoso.com"

This example sets the DHCPv6 server level option values for DNS server and domain search list options.

Example 2: Set option values for a scope

PS C:\> Set-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -Prefix 2001:4898:7020:1020:: -DnsServer 2001:4898:7020:1020::2 -DomainSearchList "contoso.com"

This example sets the DHCPv6 option values for DNS server and domain search list options on the scope 2001:4898:7020:1020::.

Example 3: Set service-wide option value for DNS server

PS C:\> Set-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -OptionId 23 -Value "2001:4898:7020:1020::2"

This example sets server-wide DHCPv6 option value for option ID 23, or the DNS server.

Example 4: Set option value for DNS server for a scope

PS C:\> Set-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -Prefix 2001:4898:7020:1020:: -OptionId 23 -Value "2001:4898:7020:1020::2"

This example sets the DHCPv6 option value for option ID 23, or the DNS server, for the specified DHCPv6 scope.

Example 5: Set option value for DNS server for a reservation

PS C:\> Set-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -ReservedIP 2001:4898:7020:1020::5 -OptionId 23 -Value "2001:4898:7020:1020::2"

This example sets the DHCPv6 option value for option ID 23, or the DNS server, for the specified reservation.

Example 6: Set a vendor class specific option value

PS C:\> Set-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -Prefix 2001:4898:7020:1020:: -VendorClass "MSUCClient" -OptionId 5 -Value "6874747073"

This example sets the vendor class specific DHCPv6 option value configured on the specified scope for the specified vendor class named MSUCClient.

Example 7: Set a user class specific option value for DNS server

PS C:\> Set-DhcpServerv6OptionValue -ComputerName "dhcpserver.contoso.com" -Prefix 2001:4898:7020:1020:: -UserClass "LabComputer" -OptionId 23 -Value "2001:4898:7020:1020::20"

This example sets the user class specific DHCPv6 option value for option ID 23, or the DNS server, on the specified scope for the specified user class.

Parameters

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet. For more information about Windows PowerShell® background jobs, see about_Jobs.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ComputerName

Specifies the DNS name, or IPv4 or IPv6 address, of the target computer that runs the DHCP server service.

Type:String
Aliases:Cn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DnsServer

Specifies one or more values for the DNS server option.

Type:IPAddress[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-DomainSearchList

Specifies one or more values for the domain search list option.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Force

Specifies that the DNS server validation is skipped. This parameter is applicable only if the DNSServer parameter or option ID 23 is specified.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-InfoRefreshTime

Specifies the value for the information refresh option. This parameter value specifies an upper bound for how long a client waits before refreshing information retrieved from DHCPv6 server. This parameter is used with stateless DHCPv6 as there are no addresses or other entities with lifetimes that can tell the client when to contact the DHCPv6 server to refresh its configuration.

Type:UInt32
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-OptionId

Specifies the numeric identifier (ID) of the option for which a value is set.

Type:UInt32
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Prefix

Specifies the IPv6 subnet prefix of the scope on which the option value is set.

Type:IPAddress
Position:3
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-ReservedIP

Specifies the IPv6 address of the reservation for which the option value is set.

Type:IPAddress
Aliases:IPAddress
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-UserClass

Specifies the option value for the specified user class.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Value

Specifies the value to set for the option.

Type:String[]
Position:2
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-VendorClass

Specifies the option value for the specified vendor class.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Outputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.