Table of contents
TLS
TOC
Collapse the table of content
Expand the table of content

Add-IpamBlock

Last Updated: 2/14/2017

SYNOPSIS

Adds an IP address block to IPAM.

SYNTAX

Add-IpamBlock [-NetworkId] <String> [[-StartIPAddress] <IPAddress>] [[-EndIPAddress] <IPAddress>]
 [-Rir <String>] [-RirReceivedDate <DateTime>] [-Description <String>] [-LastAssignedDate <DateTime>]
 [-Owner <String>] [-PassThru] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [-WhatIf]
 [-Confirm] [<CommonParameters>]

DESCRIPTION

The Add-IpamBlock cmdlet adds an IP address block to IP Address Management (IPAM). Specify the network from which the IP address block is added by using the NetworkID parameter. If the address category of the block you add is public, you must specify the Rir parameter. The Rir parameter is optional for private address blocks.

EXAMPLES

Example 1: Add an IPv4 private address block

PS C:\> Add-IpamBlock -NetworkId "10.0.0.0/8" -Description "IP block for Contoso" -PassThru


Utilization        : Under

NetworkId          : 10.0.0.0/8

StartAddress       : 10.0.0.0

EndAddress         : 10.255.255.255

Rir                :

LastAssignedDate   :

TotalAddresses     : 16777216

AssignedAddresses  : 2440

UtilizedAddresses  : 732

PercentageUtilized : 30

AddressCategory    : Private

Owner              :

Description        : IP block for Contoso

RirReceivedDate    :

PercentageAssigned : 1.454353

This command adds an IPv4 private address block to the IPAM server. The command uses the first address and last address of the network that has the ID 10.0.0.0/8 for the start and end addresses of the block. The command includes the PassThru parameter, so it displays results to the console.

Example 2: Add a public address block

PS C:\> Add-IpamBlock -NetworkId "206.73.118.0/24" -Rir "APNIC" -PassThru


Utilization        : Under

NetworkId          : 206.73.118.0/24

StartAddress       : 206.73.118.0

EndAddress         : 206.73.118.255

Rir                : APNIC

LastAssignedDate   :

TotalAddresses     : 256

AssignedAddresses  : 0

UtilizedAddresses  : 0

PercentageUtilized : 0

AddressCategory    : Public

Owner              :

Description        :

RirReceivedDate    :

PercentageAssigned : 0

This command adds a public address block to the IPAM server. You must specify the Rir parameter if the address category of the block you add is Public.

Example 3: Add an IPv6 address block

PS C:\> Add-IpamBlock -NetworkId 2001:DB8:ff00::/120 -PassThru


Utilization        : Under

NetworkId          : 2001:db8:ff00::/120

StartAddress       : 2001:db8:ff00::

EndAddress         : 2001:db8:ff00::ff

Rir                :

LastAssignedDate   :

TotalAddresses     : 256

AssignedAddresses  : 0

UtilizedAddresses  : 0

PercentageUtilized : 0

AddressCategory    : Global

Owner              :

Description        :

RirReceivedDate    :

PercentageAssigned : 0

This command adds an IPv6 address block to the IPAM server.

PARAMETERS

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.

For more information about Windows PowerShell background jobs, see about_Jobs.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type: CimSession[]
Parameter Sets: (All)
Aliases: Session

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf

Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

-Description

Specifies a description for the address block.

Type: String
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-EndIPAddress

Specifies the end address for the IP address block. If you do not specify this parameter, the cmdlet uses the last IP address of the network that you specify for the NetworkId parameter. If you specify this parameter, you must specify the StartIPAddress parameter.

Type: IPAddress
Parameter Sets: (All)
Aliases: 

Required: False
Position: 3
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-LastAssignedDate

Specifies the last date, as a DateTime object, on which the block was assigned to devices on a network. To obtain a DateTime object, use the Get-Date cmdlet. For more information, type Get-Help Get-Date.

Type: DateTime
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-NetworkId

Specifies an IP network prefix, in Classless InterDomain Routing (CIDR) notation. This is the network from which the IP address block is added to the IPAM server.

Type: String
Parameter Sets: (All)
Aliases: 

Required: True
Position: 1
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-Owner

Specifies the owner of the IP address block.

Type: String
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Rir

Specifies the regional internet registry (RIR) for public addresses. RIR is a built-in custom field in the IPAM server that contains the following built-in values:

  • AFRINIC
  • APNIC
  • ARIN
  • LACNIC
  • RIPE
Type: String
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-RirReceivedDate

Specifies the date, as a DateTime object, when you obtained the public address block from the RIR.

Type: DateTime
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-StartIPAddress

Specifies the start address for the IP address block. If you do not specify this parameter, the cmdlet uses the first address of the network that you specify for the NetworkId parameter. If you specify this parameter, you must specify the EndIPAddress parameter.

Type: IPAddress
Parameter Sets: (All)
Aliases: 

Required: False
Position: 2
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type: Int32
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi

Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

CommonParameters

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

INPUTS

OUTPUTS

NOTES

Get-IpamBlock

Set-IpamBlock

Remove-IpamBlock

© 2017 Microsoft