Table of contents
TLS
TOC
Collapse the table of content
Expand the table of content

Set-NetAdapterBinding

Last Updated: 3/8/2017

SYNOPSIS

Sets the binding state of a transport or filter on a network adapter.

SYNTAX

ByName (Default)

Set-NetAdapterBinding [-Name] <String[]> [-ComponentID <String[]>] [-DisplayName <String[]>] [-IncludeHidden]
 [-AllBindings] [-Enabled <Boolean>] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>] [-AsJob] [-PassThru]
 [-WhatIf] [-Confirm] [<CommonParameters>]

ByInstanceID

Set-NetAdapterBinding -InterfaceDescription <String[]> [-ComponentID <String[]>] [-DisplayName <String[]>]
 [-IncludeHidden] [-AllBindings] [-Enabled <Boolean>] [-CimSession <CimSession[]>] [-ThrottleLimit <Int32>]
 [-AsJob] [-PassThru] [-WhatIf] [-Confirm] [<CommonParameters>]

InputObject (cdxml)

Set-NetAdapterBinding -InputObject <CimInstance[]> [-Enabled <Boolean>] [-CimSession <CimSession[]>]
 [-ThrottleLimit <Int32>] [-AsJob] [-PassThru] [-WhatIf] [-Confirm] [<CommonParameters>]

DESCRIPTION

The Set-NetAdapterBinding cmdlet sets the binding state of a transport or filter on a network adapter. By default only visible bindings are set unless the AllBindings parameter is specified. If only enabling or disabling bindings, then the Enable-NetAdapterBinding or Disable-NetAdapterBinding cmdlets can be used. If you disable or enable a network adapter binding, the cmdlet can automatically enable or disable other network adapter bindings.

EXAMPLES

Example 1: Enable TCP/IPv4 on the specified network adapter

PS C:\> Set-NetAdapterBinding -Name "MyAdapter" -DisplayName "Internet Protocol Version 4 (TCP/IPv4)" -Enabled $True

This command enables TCP/IPv4 on the network adapter named MyAdapter.

Example 2: Disable TCP/IPv4 on the specified network adapter

PS C:\> Set-NetAdapterBinding -Name "MyAdapter" -DisplayName "Internet Protocol Version 4 (TCP/IPv4)" -Enabled $False

This command disables TCP/IPv4 on the network adapter named MyAdapter.

Example 3: Enable TCP/IPv4 on the specified network adapter using the component ID

PS C:\> Set-NetAdapterBinding -Name "MyAdapter" -ComponentID ms_tcpip -Enabled $True

This command enables TCP/IPv4 on the network adapter named MyAdapter using the component ID.

PARAMETERS

-AllBindings

Indicates that the cmdlet sets filters or transports that are not visible by default.

Type: SwitchParameter
Parameter Sets: ByName, ByInstanceID
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet. For more information about Windows PowerShell® background jobs, see about_Jobs.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type: CimSession[]
Parameter Sets: (All)
Aliases: Session

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ComponentID

Specifies as an array the underlying names of the transport or filter in the following form: ms_xxxx, such as ms_tcpip.

Type: String[]
Parameter Sets: ByName, ByInstanceID
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf

Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

-DisplayName

Specifies an array of transport or filter names shown in the Networking tab under the network adapter properties in Windows Server® 2012 and later.

Type: String[]
Parameter Sets: ByName, ByInstanceID
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Enabled

Indicates whether the transport or filter is enabled or disabled. The acceptable values for this parameter are: $True or $False.

Type: Boolean
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-IncludeHidden

Indicates that the cmdlet includes both visible and hidden network adapters in the operation. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.

Type: SwitchParameter
Parameter Sets: ByName, ByInstanceID
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-InputObject

Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.

Type: CimInstance[]
Parameter Sets: InputObject (cdxml)
Aliases: 

Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False

-InterfaceDescription

Specifies an array of network adapter interface descriptions. For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device.

Type: String[]
Parameter Sets: ByInstanceID
Aliases: ifDesc, InstanceID

Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-Name

Specifies an array of network adapter names.

Type: String[]
Parameter Sets: ByName
Aliases: ifAlias, InterfaceAlias

Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type: Int32
Parameter Sets: (All)
Aliases: 

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi

Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

CommonParameters

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

INPUTS

Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter BindingSettingData[]

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

OUTPUTS

Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter BindingSettingData

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

NOTES

Disable-NetAdapterBinding

Enable-NetAdapterBinding

Get-NetAdapterBinding

© 2017 Microsoft