Remove-BgpRouter
Remove-BgpRouter
Removes a BGP router.
構文
Parameter Set: Remove2
Remove-BgpRouter [-AsJob] [-CimSession <CimSession[]> ] [-Force] [-RoutingDomain <String[]> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
詳細説明
The Remove-BgpRouter cmdlet removes BGP router routers. In a multitenant deployment, the cmdlet removes a BGP router for the routing domain or a tenant. In a non-multitenant deployment, the cmdlet removes the BGP router for the local computer. When you remove a BGP router, the BGP router can no longer read and distribute routing information between autonomous systems (AS). In addition, the other routers that added the router as a peer delete all the information learned from the router and reacalculate their routes accordingly.
パラメーター
-AsJob
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。
エイリアス |
Session |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Force
ユーザーの確認を求めずにコマンドを強制的に実行します。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-RoutingDomain<String[]>
Specifies an ID, as a string, for a routing domain. The ID of a routing domain is a unique user-defined alphanumeric string.
エイリアス |
RoutingDomainName |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-ThrottleLimit<Int32>
このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0
を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Confirm
コマンドレットを実行する前に、ユーザーに確認を求めます。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-WhatIf
コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
例
Example 1: Remove BGP routing
This command removes BGP routing from the local router. The command prompts the user for confirmation before removing the BGP Router.
PS C:\> Remove-BgpRouter
Example 2: Remove BGP routing without confirmation
This command removes BGP routing from the local router. The command does not prompt the user for confirmation before removing BGP routing.
PS C:\> Remove-BgpRouter -Force
Example 3: Remove BGP routers for routing domains
This command removes the BGP routers from the routing domains named Rd_001 and Rd_002. The command prompts the user for confirmation before removing the BGP routers.
PS C:\> Remove-BgpRouter -RoutingDomain "Rd_001","Rd_002"
Example 4: Remove BGP routers for a routing domain without confirmation
This command removes the BGP routers from the routing domain named Rd_002. The command does not prompt the user for confirmation before removing the BGP routers.
PS C:\> Remove-BgpRouter -RoutingDomain "Rd_002" -Force