Approve-WdsClient

Approve-WdsClient

Approves clients.

構文

Parameter Set: MultipleMachine
Approve-WdsClient [-AsJob] [-BootImagePath <String> ] [-BootProgram <String> ] [-CimSession <CimSession[]> ] [-JoinDomain <Boolean> ] [-OU <String> ] [-ReferralServer <String> ] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

Parameter Set: MultipleMachineUserAndJoinRights
Approve-WdsClient -JoinRights <JoinRights> -User <String> [-AsJob] [-BootImagePath <String> ] [-BootProgram <String> ] [-CimSession <CimSession[]> ] [-JoinDomain <Boolean> ] [-OU <String> ] [-ReferralServer <String> ] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

Parameter Set: SingleMachine
Approve-WdsClient -RequestId <UInt32> [-AsJob] [-BootImagePath <String> ] [-BootProgram <String> ] [-CimSession <CimSession[]> ] [-DeviceName <String> ] [-JoinDomain <Boolean> ] [-OU <String> ] [-ReferralServer <String> ] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

Parameter Set: SingleMachineUserAndJoinRights
Approve-WdsClient -JoinRights <JoinRights> -RequestId <UInt32> -User <String> [-AsJob] [-BootImagePath <String> ] [-BootProgram <String> ] [-CimSession <CimSession[]> ] [-DeviceName <String> ] [-JoinDomain <Boolean> ] [-OU <String> ] [-ReferralServer <String> ] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

詳細説明

The Approve-WdsClient cmdlet approves clients that need administrative approval. Unknown clients require approval before the server that runs Windows Deployment Services boots the client in the Pre-Boot Execution Environment (PXE). You can specify a single device to approve by using a request ID. The server that runs Windows Deployment Services allocates a request ID to a device. If you do not specify a client to approve, the cmdlet approves all pending clients.

At the time you approve an unknown client, you can also modify settings for the client. Use the New-WdsClient and Set-WdsClient cmdlets to create and modify pre-staged clients.

パラメーター

-AsJob

-BootImagePath<String>

Specifies a path to the boot image. This is a relative path from the RemoteInstall share to the boot image file for the computer.

-BootProgram<String>

Specifies the relative path from the RemoteInstall share to the network boot program for the computer.

-CimSession<CimSession[]>

リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。

-DeviceName<String>

Specifies the name of the computer associated with the pre-staged client. This is a sAMAccountName value.

-JoinDomain<Boolean>

Indicates whether to join the computer to a domain as the account specified by the User parameter.

-JoinRights<JoinRights>

Specifies the rights to assign to the account. このパラメーターに対して使用できる値:

-- Full. Assigns full access rights, which includes the right to join the computer to the domain at any time.
-- JoinOnly. Requires the administrator to reset the computer account before the user can join the computer to the domain.

-OU<String>

Specifies the distinguished name of an OU. The cmdlet creates the computer account object in this location. If you do not specify this parameter, Windows Deployment Services creates the account in the default computer container in the domain of the server that runs Windows Deployment Services.

-ReferralServer<String>

Specifies the name of a server. If you specify a referral server, the computer connects to this Windows Deployment Services server to download the network boot program and boot image by using Trivial File Transfer Protocol (TFTP).

-RequestId<UInt32>

Specifies the request ID that the server that runs Windows Deployment Services allocates to a device in the Pending Device database. If you do not specify this parameter, the cmdlet approves all all clients in the Pending Device database.

-ThrottleLimit<Int32>

このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0 を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。

-User<String>

Specifies a user, in the format DOMAIN\User or User@Domain. If you specify a value of $True for the JoinDomain parameter, the cmdlet assigns the user the right to join the computer to the domain specified by the Domain parameter. To join the client computer to the specified domain without granting any user rights, specify a value of $True for the JoinDomain parameter, but do not specify a user.

-WdsClientUnattend<String>

Specifies an answer file as a relative path from the RemoteInstall share. This file contains information for the Windows Deployment Services client user interface screens, such as entering credentials, choosing an install image, and configuring the disk.

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

• Microsoft.Management.Infrastructure.CimInstance#MSFT_WdsClient

例

Example 1: Approve all pre-staged clients and modify settings

This command approves all pending pre-staged clients. The command also specifies a boot image, boot program, and referral server. The PXE boot process refers to the answer file specified by the WdsClientUnattend parameter.

The JoinDomain parameter has a value of $True, so these computers join a domain. The command specifies an OU for the computers.

PS C:\> Approve-WdsClient -BootImagePath "boot\x86\images\Contosox86boot.wim" -BootProgram "boot\x86\PxeBoot.com" -JoinDomain $True -OU "OU=Unit21,CN=TSQAMain,DC=Contoso,DC=com" -ReferralServer "WindowsDS01" -WdsClientUnattend "WindowsDSClientUnattend\Unattend.xml"

Example 2: Approve all pre-staged clients and specify a user

This command approves all pending pre-staged clients. The command also specifies a boot image and boot program.

The JoinDomain parameter has a value of $True, so these computers join a domain. The command specifies the user TSQADOMAIN\PattiFuller and specifies an OU for the computers.

PS C:\> Approve-WdsClient -JoinRights JoinOnly -User "TSQADOMAIN\PattiFuller" -BootImagePath "boot\x86\images\Contosox86boot.wim" -BootProgram "boot\x86\PxeBoot.com" -JoinDomain $True -OU "OU=Unit21,CN=TSQAMain,DC=Contoso,DC=com"

Example 3: Approve a pre-staged client

This command approves a pre-staged client that has a request ID of seven, and assigns the device name TSQA004.

PS C:\> Approve-WdsClient -RequestId 7 -DeviceName "TSQA004"

Example 4: Approve a pre-staged client and modify settings

This command approves a pre-staged client that has a request ID of 22 and assigns the device name TSQA009. The command also specifies a boot image and boot program.

The JoinDomain parameter has a value of $True, so this computer joins a domain. The command specifies the user ITAdmin01@TSQADomain.Contoso.com and specifies an OU for the computer. The user has full join rights.

PS C:\> Approve-WdsClient -JoinRights Full -RequestId 22 -User "ITAdmin01@TSQADomain.Contoso.com" -BootImagePath "boot\x86\images\Contosox86boot.wim" -BootProgram "boot\x86\PxeBoot.com" -DeviceName "TSQA009" -JoinDomain $True -OU "OU=Unit21,CN=TSQAMain,DC=Contoso,DC=com"

関連トピック

Deny-WdsClient

Get-WdsClient

New-WdsClient

Remove-WdsClient

Set-WdsClient