Set-DfsrConnectionSchedule
Set-DfsrConnectionSchedule
Changes the settings of a connection schedule between members of a replication group.
構文
Parameter Set: ScheduleNameParameterSet
Set-DfsrConnectionSchedule [[-GroupName] <String[]> ] [-SourceComputerName] <String> [-DestinationComputerName] <String> [[-UseUTC] <Boolean> ] [[-ScheduleType] <ConnectionScheduleType> {Always | Never | UseGroupSchedule} ] [[-DomainName] <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: CustomScheduleParameterSet
Set-DfsrConnectionSchedule [[-GroupName] <String[]> ] [-SourceComputerName] <String> [-DestinationComputerName] <String> [[-UseUTC] <Boolean> ] [-Day] <DayOfWeek[]> [-BandwidthDetail] <String> [[-DomainName] <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
詳細説明
The Set-DfsrConnectionSchedule cmdlet changes the schedule and bandwidth throttle of a connection between two members of a replication group.
DFS Replication connections are the logical partnerships between members in a replication group. The DFS Replication service uses the Remote Procedure Call (RPC) protocol to communicate between servers. By default, DFS Replication creates connections with the recommended schedule and bandwidth configuration: full bandwidth, and 24 hours a day, seven days a week availability.
パラメーター
-BandwidthDetail<String>
Specifies a custom schedule value string.
The schedule value defines the settings for each 15-minute interval block with its bandwidth, with 4 blocks to a set, where each set represents 1 hour. There are 24 sets. The time starts at 00:00 and ends at 24:00. The valid settings on a 15-minute block are 0 (zero) through F, using hexadecimal. The following shows the mapping of the valid settings:
0 = No replication
1 = 16 kilobits per second (Kbps)
2 = 64 Kbps
3 = 128 Kbps
4 = 256 Kbps
5 = 512 Kbps.
6 = 1 megabit per second (Mbps)
7 = 2 Mbps
8 = 4 Mbps
9 = 8 Mbps
A = 16 Mbps
B = 32 Mbps
C = 64 Mbps
D = 128 Mbps
E = 256 Mbps
F = Full bandwidth replication
A complete value string must include all 24 sets with 4 blocks to a set, for a total of 96 hexadecimal characters. For example: ffffffffffff0000ffff0000ffff00004444000044440000444400004444000044440000ffff0000ffff0000ffffffff
エイリアス |
なし |
必須? |
true |
位置は? |
6 |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Day<DayOfWeek[]>
Specifies an array of days of the week. You can specify either an enumerated string value or its corresponding integer for this parameter. このパラメーターに対して使用できる値:
-- Sunday (0)
-- Monday (1)
-- Tuesday (2)
-- Wednesday (3)
-- Thursday (4)
-- Friday (5)
-- Saturday (6)
エイリアス |
なし |
必須? |
true |
位置は? |
5 |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-DestinationComputerName<String>
Specifies the name of the receiving computer. A receiving computer is also called an inbound or downstream computer.
エイリアス |
ReceivingMember,RMem |
必須? |
true |
位置は? |
3 |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-DomainName<String>
Specifies the NetBIOS name or fully qualified domain name (FQDN) for the Active Directory Domain Service (AD DS) domain that contains the replication group. If you do not specify this parameter, the cmdlet uses the domain of the current user.
エイリアス |
なし |
必須? |
false |
位置は? |
101 |
既定値 |
[Current Domain] |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-GroupName<String[]>
Specifies an array of names of replication groups. You can use a comma separated list and the wildcard character (*).
エイリアス |
RG,RgName |
必須? |
false |
位置は? |
1 |
既定値 |
なし |
パイプライン入力を許可する |
True (ByValue, ByPropertyName) |
ワイルドカード文字を許可する |
true |
-ScheduleType<ConnectionScheduleType>
Specifies the type of connection schedule. You can specify the inherited replication group schedule, a connection-based closed schedule that allows no replication, or a connection-based full schedule that enables replication for 24 hours a day, seven days a week using full bandwidth. You can specify either an enumerated string value or its corresponding integer for this parameter. このパラメーターに対して使用できる値:
-- UseGroupSchedule (0)
-- Never (1)
-- Always (2)
エイリアス |
なし |
必須? |
false |
位置は? |
5 |
既定値 |
0 |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-SourceComputerName<String>
Specifies the name of the sending computer. A sending computer is also called an outbound or upstream computer.
エイリアス |
SendingMember,SMem |
必須? |
true |
位置は? |
2 |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-UseUTC<Boolean>
Indicates whether the destination computer uses Coordinated Universal Time (UTC) for the schedule. By default, the destination computer interprets the schedule in its own local time.
エイリアス |
なし |
必須? |
false |
位置は? |
4 |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-Confirm
コマンドレットを実行する前に、ユーザーに確認を求めます。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-WhatIf
コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
- Microsoft.DistributedFileSystemReplication.DfsReplicationGroup, string
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
- Microsoft.DistributedFileSystemReplication.DfsrConnectionSchedule
例
Example 1: Configure a full connection schedule
This command configures the connection schedule from the server named SRV01 to the server named SRV02 in the RG24 replication group. The ScheduleType parameter specifies a full schedule that enables replication 24 hours a day, seven days a week that uses full bandwidth.
PS C:\> Set-DfsrConnectionSchedule -GroupName "RG24" -SourceComputerName "SRV01" -DestinationComputerName "SRV02" -ScheduleType Always
Example 2: Set a connection schedule
This command configures the connection schedule from the server named SRV01 to the server named SRV02 in the RG24 replication group. The command specifies that the DFS Replication service prevents all replication from 9 A.M. to 5 P.M. Monday through Friday, and allows replicating in all other intervals at full bandwidth.
PS C:\> Set-DfsrConnectionSchedule -GroupName "RG24" -SourceComputerName "SRV01" -DestinationComputerName "SRV01" -Day Monday,Tuesday,Wednesday,Thursday,Friday - BandwidthDetail "ffffffffffffffffffffffffffffffffffff00000000000000000000000000000000ffffffffffffffffffffffffffff"