Get-IpamRange
Get-IpamRange
Gets a set of IP address ranges from an IPAM server.
構文
Parameter Set: ByAF
Get-IpamRange -AddressFamily <AddressFamily[]> [-AddressCategory <AddressCategory[]> ] [-AddressSpace <String[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-ManagedByService <String[]> ] [-NetworkType <VirtualizationType[]> ] [-ServiceInstance <String[]> ] [-ThrottleLimit <Int32> ] [-Unmapped] [ <CommonParameters>]
Parameter Set: ByBlock
Get-IpamRange -MappingToBlock <CimInstance> [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByID
Get-IpamRange -EndIPAddress <IPAddress[]> -StartIPAddress <IPAddress[]> [-AddressSpace <String[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-ManagedByService <String[]> ] [-NetworkType <VirtualizationType[]> ] [-ServiceInstance <String[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: BySubnet
Get-IpamRange -MappingToSubnet <CimInstance> [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
詳細説明
The Get-IpamRange cmdlet gets a set of IP address ranges from IP Address Management (IPAM). Use this cmdlet to get IP address ranges of a particular address family or to get a particular range based on starting and ending IP addresses. The cmdlet includes parameter sets to get all ranges that map to a given IP address block or a subnet.
パラメーター
-AddressCategory<AddressCategory[]>
Specifies an array of address families of IP addresses. このパラメーターに対して使用できる値:
-- IPv4
-- IPv6
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-AddressFamily<AddressFamily[]>
Specifies an array of address families of IP address range objects to get. このパラメーターに対して使用できる値:
-- IPv4
-- IPv6
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-AddressSpace<String[]>
Specifies an array of address spaces of the IP address ranges to query. If you do not specify a value, the cmdlet gets data for all address spaces in IPAM.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-AsJob
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。
エイリアス |
Session |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-EndIPAddress<IPAddress[]>
Specifies an array of IP addresses. For this parameter, the addresses represent the high end of the ranges to get.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-ManagedByService<String[]>
Specifies an array of services that manage the range to get.
エイリアス |
MB |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-MappingToBlock<CimInstance>
Specifies the ranges that map to an address block.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
-MappingToSubnet<CimInstance>
Specifies an IP range that maps to a subnet.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
-NetworkType<VirtualizationType[]>
Specifies an array of network types for the addresses to be retrieved. このパラメーターに対して使用できる値:
-- Provider
-- Customer
-- NonVirtualized
If the value of the parameter is Default, then this parameter can take the value Provider or NonVirtualized. If the value of the parameter is Provider, then the value of this parameter, if specified, must be Provider. Specifying any other value for this parameter will result in an error. Similarly, if the value of the parameter is Customer, then the value of this parameter, if specified, must be Customer. Specifying any other value for this parameter will result in an error.
If you specify a NetworkType but do not specify an AddressSpace, the cmdlet returns all IP address ranges of the given network type.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-ServiceInstance<String[]>
Specifies an array of service instances that manage the address ranges to get.
エイリアス |
SI |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-StartIPAddress<IPAddress[]>
Specifies an array of IP addresses. For this parameter, the addresses represent the high end of the ranges to get.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-ThrottleLimit<Int32>
このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0
を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Unmapped
Indicates that the cmdlet gets the unmapped ranges.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
CimInstance#ROOT/microsoft/ipam/MSFT_IPAM_Range
An array of IP address ranges that are present in IPAM datastore.
例
Example 1: Get all IPv4 address ranges
This command gets all private physical IPv4 address ranges, either provider or non virtualized.
PS C:\> Get-IpamRange -AddressFamily IPv4 -AddressCategory Private -AddressSpace Default
Example 2: Get all IPv4 ranges for a network type
This command gets all private IPv4 ranges of network type provider that belong to any provider address space.
PS C:\> Get-IpamRange -AddressFamily IPv4 -AddressCategory Private -NetworkType Provider
Example 3: Get all IPv4 ranges in the default address space for a provider network type
This command gets all private IPv4 ranges of network type provider that belong to the default address space.
PS C:\> Get-IpamRange -AddressFamily IPv4 -AddressCategory Private -NetworkType Provider -AddressSpace Default
Example 4: Get all IPv4 ranges for a customer network type
This command gets all private IPv4 ranges of network type customer, and stores the result in the variable named $PrivateCustomerRanges.
PS C:\> $PrivateCustomerRanges=Get-IpamRange -AddressFamily IPv4 -AddressCategory Private -NetworkType Customer
Example 5: Get all IPv4 ranges for a network type and address space
This command gets all private IPv4 addresses that are of network type Customer that belong to the Contoso customer address space.
PS C:\> $privateCustomerRanges = Get-IpamRange -AddressFamily IPv4 -AddressCategory Private -NetworkType Customer -AddressSpace Contoso
Example 6: Get all IPv4 ranges between two addresses
This command gets the details of a given IP address range, and stores the result in the variable named $Range.
PS C:\> $Range= Get-IpamRange -StartIPAddress 10.12.1.1 -EndIPAddress 10.12.1.254 -ManagedByService IPAM -ServiceInstance localhost
Example 7: Get all overlapping ranges
This command gets all overlapping ranges from the default address space. Both Provider and NonVirtualized ranges can exist in the default address space. In IPAM, IP ranges are marked overlapping if they belong to same address space and their start and end IP addresses overlap.
PS C:\> Get-IpamRange -AddressFamily IPv4 -AddressCategory Private -AddressSpace Default| where {$Overlapping -eq $True}
Example 8: Get all IPv4 ranges for a subnet
This example gets all IP ranges which map to a given subnet. Since the network type of the subnet here is non-virtualized, the results contain only the physical addresses and the fabric addresses from the default address space that maps to this subnet.
The first command uses the Get-IpamSubnet cmdlet to get a subnet, and stores the result in the variable named $ContosoPhysicalSubnet.
The second command gets the IP address ranges and stores the result in the $AddressMappingToSubnet variable.
PS C:\> $ContosoPhysicalSubnet = Get-IpamSubnet -NetworkId 10.12.0.0/16PS C:\>$AddressMappingToSubnet = Get-IpamRange -MappingToSubnet $ContosoPhysicalSubnet