Add-VmNetworkAdapterRoutingDomainMapping

Add-VmNetworkAdapterRoutingDomainMapping

Adds a routing domain and virtual subnets to a virtual network adapter.

構文

Parameter Set: VMName
Add-VmNetworkAdapterRoutingDomainMapping [-VMName] <String[]> [-RoutingDomainID] <String> [-RoutingDomainName] <String> [[-IsolationID] <Int32[]> ] [[-IsolationName] <String[]> ] [-ComputerName <String[]> ] [-Passthru] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ManagementOS
Add-VmNetworkAdapterRoutingDomainMapping [-RoutingDomainID] <String> [-RoutingDomainName] <String> [[-IsolationID] <Int32[]> ] [[-IsolationName] <String[]> ] -ManagementOS [-ComputerName <String[]> ] [-Passthru] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ResourceObject
Add-VmNetworkAdapterRoutingDomainMapping [-VMNetworkAdapter] <VMNetworkAdapterBase[]> [-RoutingDomainID] <String> [-RoutingDomainName] <String> [[-IsolationID] <Int32[]> ] [[-IsolationName] <String[]> ] [-Passthru] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: VMObject
Add-VmNetworkAdapterRoutingDomainMapping [-VM] <VirtualMachine[]> [-RoutingDomainID] <String> [-RoutingDomainName] <String> [[-IsolationID] <Int32[]> ] [[-IsolationName] <String[]> ] [-Passthru] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

詳細説明

The Add-VmNetworkAdapterRoutingDomainMapping cmdlet adds a routing domain and virtual subnets to a virtual network adapter. The cmdlet adds the information about the routing domain and virtual subnets to connected multitenant virtual machines.

パラメーター

-ComputerName<String[]>

Specifies an array of Hyper-V hosts. The cmdlet adds the routing domain and virtual subnet to a virtual network adapter on the Hyper-V hosts that you specify.

-IsolationID<Int32[]>

Specifies an array of IDs of virtual subnets. The cmdlet adds the virtual subnets that you specify to the virtual network adapter. You can isolate a virtual machine adapter by using virtual local area network (VLAN), Hyper-V Network Virtualization, or a third party virtualization solution. For more information about isolation IDs, see the Set-VmNetworkAdapterIsolation cmdlet.

-IsolationName<String[]>

Specifies an array of names of virtual subnets. The cmdlet adds the virtual subnets that you specify to the virtual network adapter. The subnet uses VLAN or Hyper-V Network Virtualization.

-ManagementOS

Indicates that the cmdlet operates on the parent or host operating system.

-Passthru

作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。

-RoutingDomainID<String>

Specifies the ID of a routing domain. The ID of a routing domain is a system-assigned GUID. The cmdlet adds the routing domain that you specify to the virtual network adapter.

-RoutingDomainName<String>

Specifies the name of a routing domain. The cmdlet adds the routing domain that you specify to the virtual network adapter.

-VM<VirtualMachine[]>

Specifies an array of virtual machine objects. The cmdlet adds the routing domain to the network interfaces that belong to the virtual machines that you specify. To obtain a virtual machine object, use the Get-VM cmdlet.

-VMName<String[]>

Specifies an array of friendly names of virtual machines. The cmdlet adds the routing domain to the network interfaces that belong to the virtual machines that you specify.

-VMNetworkAdapter<VMNetworkAdapterBase[]>

Specifies an array of virtual network adapter as VMNetworkAdapterBase objects. The cmdlet adds the routing domain on the adapters that you specify. To obtain a network adapter, use the Get-VMNetworkAdapter cmdlet.

-VMNetworkAdapterName<String>

Specifies the name of a virtual network adapter. The cmdlet adds the routing domain on adapter that you specify.

-Confirm

コマンドレットを実行する前に、ユーザーに確認を求めます。

-WhatIf

コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

例

Example 1: Add a tenant and virtual subnet to a multitenant virtual network

This command adds a tenant that has the specified routing domain to the virtual network adapter named Internal NIC that belongs to the multitenant virtual machine named Gateway01. The command also adds the virtual subnet that has the ID 6000 to the virtual network adapter.

PS C:\> Add-VMNetworkAdapterRoutingDomainMapping -VMName "Gateway01" -VMNetworkAdapterName "Internal NIC" –RoutingDomainID "{5a07361e-6a54-49fc-9210-bfbf14a5c56f}" RoutingDomainName "Contoso" -IsolationID 6000 -IsolationName "ContosoGatewayVsid"

関連トピック

Get-VMNetworkAdapterRoutingDomainMapping

Set-VmNetworkAdapterRoutingDomainMapping

Remove-VMNetworkAdapterRoutingDomainMapping

Get-VM