Add-VMNetworkAdapterExtendedAcl
Add-VMNetworkAdapterExtendedAcl
Creates an extended ACL for a virtual network adapter.
構文
Parameter Set: VMName
Add-VMNetworkAdapterExtendedAcl [-VMName] <String[]> [-Action] <VMNetworkAdapterExtendedAclAction> [-Direction] <VMNetworkAdapterExtendedAclDirection> [[-LocalIPAddress] <String> ] [[-RemoteIPAddress] <String> ] [[-LocalPort] <String> ] [[-RemotePort] <String> ] [[-Protocol] <String> ] [-Weight] <Int32> [-ComputerName <String[]> ] [-IdleSessionTimeout <Int32> ] [-IsolationID <Int32> ] [-Passthru] [-Stateful <Boolean> ] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ManagementOS
Add-VMNetworkAdapterExtendedAcl [-Action] <VMNetworkAdapterExtendedAclAction> [-Direction] <VMNetworkAdapterExtendedAclDirection> [[-LocalIPAddress] <String> ] [[-RemoteIPAddress] <String> ] [[-LocalPort] <String> ] [[-RemotePort] <String> ] [[-Protocol] <String> ] [-Weight] <Int32> -ManagementOS [-ComputerName <String[]> ] [-IdleSessionTimeout <Int32> ] [-IsolationID <Int32> ] [-Passthru] [-Stateful <Boolean> ] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ResourceObject
Add-VMNetworkAdapterExtendedAcl [-VMNetworkAdapter] <VMNetworkAdapterBase[]> [-Action] <VMNetworkAdapterExtendedAclAction> [-Direction] <VMNetworkAdapterExtendedAclDirection> [[-LocalIPAddress] <String> ] [[-RemoteIPAddress] <String> ] [[-LocalPort] <String> ] [[-RemotePort] <String> ] [[-Protocol] <String> ] [-Weight] <Int32> [-IdleSessionTimeout <Int32> ] [-IsolationID <Int32> ] [-Passthru] [-Stateful <Boolean> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: VMObject
Add-VMNetworkAdapterExtendedAcl [-VM] <VirtualMachine[]> [-Action] <VMNetworkAdapterExtendedAclAction> [-Direction] <VMNetworkAdapterExtendedAclDirection> [[-LocalIPAddress] <String> ] [[-RemoteIPAddress] <String> ] [[-LocalPort] <String> ] [[-RemotePort] <String> ] [[-Protocol] <String> ] [-Weight] <Int32> [-IdleSessionTimeout <Int32> ] [-IsolationID <Int32> ] [-Passthru] [-Stateful <Boolean> ] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
詳細説明
The Add-VMNetworkAdapterExtendedAcl cmdlet creates an extended access control list (ACL) for a virtual network adapter. The ACL allows or denies access to a virtual machine network adapter for network packets based on source IP address, destination IP address, protocol, source port, and destination port.
パラメーター
-Action<VMNetworkAdapterExtendedAclAction>
Specifies the action for the ACL. このパラメーターに対して使用できる値:
-- Allow
-- Deny
エイリアス |
なし |
必須? |
true |
位置は? |
2 |
既定値 |
None |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-ComputerName<String[]>
Specifies an array of Hyper-V hosts. The cmdlet adds the ACL to the network adapters on the Hyper-V hosts that you specify.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Direction<VMNetworkAdapterExtendedAclDirection>
Specifies the direction of network traffic, from the perspective of the virtual machine, to which the ACL applies. The cmdlet adds an ACL that has the value that you specify. このパラメーターに対して使用できる値:
-- Inbound
-- Outbound
If you run the Get-VMNetworkAdapterExtendedAcl cmdlet, the entry that you create appears in both the inbound ACL and the outbound ACL.
エイリアス |
なし |
必須? |
true |
位置は? |
3 |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-IdleSessionTimeout<Int32>
Specifies a time-out period, in seconds, for idle sessions.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-IsolationID<Int32>
Specifies an ID of a virtual subnet. The cmdlet adds an ACL that applies to traffic on the isolated network that you specify. The subnet uses virtual local area network (VLAN) or Hyper-V Network Virtualization. For more information about isolation IDs, see the Set-VmNetworkAdapterIsolation cmdlet.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-LocalIPAddress<String>
Specifies the local IP address for the ACL. For an inbound packet, the local address is the destination IP address. For an outbound packet, the local address is the source IP address. You can specify a host address or a subnet address, or specify a wildcard, such as 0.0.0.0/0 for all IPv4 addresses, ::/0 for all IPv6 addresses, or ANY for all IPv4 and IPv6 addresses.
エイリアス |
なし |
必須? |
false |
位置は? |
4 |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-LocalPort<String>
Specifies the local port for the ACL. For an inbound TCP or UDP packet, the local port is the destination port. For an outbound packet, the local port is the source port.
エイリアス |
なし |
必須? |
false |
位置は? |
6 |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-ManagementOS
Indicates that the cmdlet operates on the parent or host operating system. If you specify this parameter, this cmdlet creates an ACL that applies to the parent or host operating system.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Passthru
作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Protocol<String>
Specifies the protocol that the ACL applies to. このパラメーターに対して使用できる値:
-- TCP
-- UDP
-- ICMP
-- an integer IP protocol ID
エイリアス |
なし |
必須? |
false |
位置は? |
8 |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-RemoteIPAddress<String>
Specifies the local IP address for the ACL. For an inbound packet, the remote address is the source IP address. For an outbound packet, the remote address is the destination IP address. You can specify a host address or a subnet address, or specify a wildcard, such as 0.0.0.0/0 for all IPv4 addresses, ::/0 for all IPv6 addresses, or ANY for all IPv4 and IPv6 addresses.
エイリアス |
なし |
必須? |
false |
位置は? |
5 |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-RemotePort<String>
Specifies the remote port for the ACL. For an inbound TCP or UDP packet, the remote port is the source port. For an outbound packet, the remote port is the destination port.
エイリアス |
なし |
必須? |
false |
位置は? |
7 |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Stateful<Boolean>
Indicates whether the ACL applies to packets in both directions of the same session. If you specify a value of $True, the ACL applies to a return packet even though that packet has the opposite direction with respect to the ACL.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-VM<VirtualMachine[]>
Specifies an array of virtual machine objects. The cmdlet adds an ACL for the virtual machines that you specify. To obtain a virtual machine object, use the Get-VM cmdlet.
エイリアス |
なし |
必須? |
true |
位置は? |
1 |
既定値 |
なし |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
-VMName<String[]>
Specifies an array of names of virtual machines. The cmdlet adds an ACL for the virtual machines that you specify.
エイリアス |
なし |
必須? |
true |
位置は? |
1 |
既定値 |
なし |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
-VMNetworkAdapter<VMNetworkAdapterBase[]>
Specifies an array VM network adapters as VMNetworkAdapterBase objects. The cmdlet adds an ACL to the adapters that you specify. To obtain a network adapter, use the Get-VMNetworkAdapter cmdlet.
エイリアス |
なし |
必須? |
true |
位置は? |
1 |
既定値 |
なし |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
-VMNetworkAdapterName<String>
Specifies the name of a virtual network adapter. The cmdlet adds an ACL to the adapter that you specify.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Weight<Int32>
Specifies the weight of an ACL entry. Larger weight values apply first, and once an ACL entry applies to a packet, other entries are no longer relevant for that packet.
エイリアス |
なし |
必須? |
true |
位置は? |
9 |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Confirm
コマンドレットを実行する前に、ユーザーに確認を求めます。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-WhatIf
コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
- None
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
- Microsoft.HyperV.PowerShell.VMNetworkAdapterExtendedAclSetting
例
Example 1: Create an ACL for Remote Desktop Protocol
This command creates a stateful inbound ACL that allows a remote device to connect to the virtual machine on port 3389, which is the port for Remote Desktop Protocol.
PS C:\> Add-VMNetworkAdapterExtendedAcl -VMName "TSQA01" -Action Allow -Direction Inbound -LocalPort "3389" -Protocol "TCP" -Weight 10 -Stateful $True
Example 2: Create an ACL to initiate a connection with timeout
This command creates a stateful ACL that allows outbound packets to a remote device by using TCP. If there is no activity for 3600 seconds, the connection times out.
PS C:\> Add-VMNetworkAdapterExtendedAcl -VMName "TSQA03" -Action Allow -Direction Outbound -RemotePort "80" -Protocol "TCP" -Weight 100 -Timeout 3600 -Stateful $True
関連トピック
Get-VMNetworkAdapterExtendedAcl