New-SCPhysicalComputerConfig
New-SCPhysicalComputerConfig
Creates a computer configuration object.
構文
Parameter Set: SkipBMCPowerControl
New-SCPhysicalComputerConfig -ComputerName <String> -PhysicalComputerNetworkAdapterConfig <PhysicalComputerNetworkAdapterConfig[]> -PhysicalComputerProfile <PhysicalComputerProfile> -SkipBmcPowerControl -SMBiosGuid <Guid> [-BootDiskVolume <String> ] [-BypassADMachineAccountCheck] [-Description <String> ] [-JobVariable <String> ] [-PROTipID <Guid]> ] [-RunAsynchronously] [-VMHostGroup <HostGroup> ] [-VMMServer <ServerConnection> ] [ <CommonParameters>]
Parameter Set: UseBMCPowerControl
New-SCPhysicalComputerConfig -BMCAddress <String> -BMCProtocol <OutOfBandManagementType> {None | IPMI | SMASH | Custom} -BMCRunAsAccount <RunAsAccount> -ComputerName <String> -PhysicalComputerNetworkAdapterConfig <PhysicalComputerNetworkAdapterConfig[]> -PhysicalComputerProfile <PhysicalComputerProfile> -SMBiosGuid <Guid> [-BMCCustomConfigurationProvider <ConfigurationProvider> ] [-BMCPort <Int32> ] [-BootDiskVolume <String> ] [-BypassADMachineAccountCheck] [-Description <String> ] [-JobVariable <String> ] [-PROTipID <Guid]> ] [-RunAsynchronously] [-VMHostGroup <HostGroup> ] [-VMMServer <ServerConnection> ] [ <CommonParameters>]
詳細説明
The New-SCPhysicalComputerConfig cmdlet creates a computer configuration object that is used during the operating system customization process.
パラメーター
-BMCAddress<String>
Specifies, or updates, the out-of-band baseboard management controller (BMC) address for a specific physical machine. This might be an IP address, the fully qualified domain name (FQDN), or the DNS prefix (which is usually the same name as the NetBIOS name).
Typically, the BMC address and its connection to the network are separate from the IP address associated with a standard network adapter. Alternatively, some computers do use a standard network adapter to provide a single address for the BMC and for the network adapter. However, the BMC address has a unique port and is thus uniquely identifiable on the network.
Example IPv4 format: -BMCAddress "10.0.0.21"
Example Ipv6 format: -BMCAddress "2001:4898:2a:3:657b:9c7a:e1f0:6829"
Example FQDN format: -BMCAddress "Computer01.Contoso.com"
Example NetBIOS format: -BMCAddress "Computer01"
NOTE: By default, VMM uses an IP address or FQDN for the BMC address. However, it is also possible to create a Windows PowerShell module that enables you to specify other types of addresses as the BMC address.
エイリアス |
none |
必須? |
true |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-BMCCustomConfigurationProvider<ConfigurationProvider>
Specifies, or updates, a configuration provider object for a baseboard management controller (BMC). A configuration provider is a plug-in to VMM that translates VMM PowerShell commands to API calls that are specific to a type of baseboard management controller. This parameter should be used with the BMCProtocol parameter value of Custom.
エイリアス |
none |
必須? |
false |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-BMCPort<Int32>
Specifies, or updates, the out-of-band baseboard management controller (BMC) port for a specific physical machine. A BMC port is also known as a service processor port. Example default ports are 623 for IPMI and 443 for SMASH over WS-Man.
Example format: -BMCPort 80
エイリアス |
none |
必須? |
false |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-BMCProtocol<OutOfBandManagementType>
Specifies, or updates, the protocol that VMM uses to communicate with the out-of-band baseboard management controller (BMC). Valid values are:
-- IPMI
-- SMASH
-- Custom
A BMC, also known as a service processor or management controller, is a specialized controller on the motherboard of a server that acts an interface between the hardware and system management software. If the motherboard of a physical machine includes a BMC, when the machine is plugged in, whether it is powered off or powered on, and whether or not an operating system is installed, information about system hardware and the state of that system hardware health is available.
Example format: -BMCProtocol "Custom"
NOTE: The Custom protocol requires you to use the BMCCustomConfigurationProvider parameter.
エイリアス |
none |
必須? |
true |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-BMCRunAsAccount<RunAsAccount>
Specifies the Run As account to use with the baseboard management controller (BMC) device.
エイリアス |
none |
必須? |
true |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-BootDiskVolume<String>
Specifies a physical hard disk object for a physical machine.
エイリアス |
none |
必須? |
false |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-BypassADMachineAccountCheck
Indicates that New-SCVMhost will reuse a computer account that already exists in Active Directory. By default, New-SCVMHost checks Active Directory for an existing account with the specified name to prevent overwriting computer accounts.
エイリアス |
none |
必須? |
false |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-ComputerName<String>
Specifies the name of a computer that VMM can uniquely identify on your network. Valid formats are:
-- FQDN
-- IPv4 or IPv6 address
-- NetBIOS name
NOTE: See the examples for a specific cmdlet to determine how that cmdlet specifies the computer name.
エイリアス |
none |
必須? |
true |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Description<String>
States a description for the specified object.
エイリアス |
none |
必須? |
false |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-JobVariable<String>
Specifies that job progress is tracked and stored in the variable named by this parameter.
エイリアス |
none |
必須? |
false |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-PhysicalComputerNetworkAdapterConfig<PhysicalComputerNetworkAdapterConfig[]>
Specifies a physical computer network adapter configuration object or objects.
エイリアス |
none |
必須? |
true |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-PhysicalComputerProfile<PhysicalComputerProfile>
Specifies a profile that is used to deploy an operating system to a computer.
エイリアス |
none |
必須? |
true |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-PROTipID<Guid]>
Specifies the ID of the PRO tip that triggered this action. This allows for auditing of PRO tips.
エイリアス |
none |
必須? |
false |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-RunAsynchronously
Indicates that the job runs asynchronously so that control returns to the command shell immediately.
エイリアス |
none |
必須? |
false |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-SkipBmcPowerControl
Indicates that this cmdlet skips BMC information and deploys an operating system without powering the computer on or off by using its BMC interface.
エイリアス |
none |
必須? |
true |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-SMBiosGuid<Guid>
Specifies the System Management BIOS globally unique identifier (SMBIOS GUID) for a physical computer that is associated with a record for that physical computer in VMM. SMBIOS defines data structures and access methods that enable a user or application to store and retrieve information about hardware on this computer, such as the name of the system, manufacturer, or the system BIOS version. Windows operating systems retrieve SMBIOS data at system startup and make that data available to programs.
エイリアス |
none |
必須? |
true |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-VMHostGroup<HostGroup>
Specifies a virtual machine host group object.
エイリアス |
none |
必須? |
false |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-VMMServer<ServerConnection>
Specifies a VMM server object.
エイリアス |
none |
必須? |
false |
位置は? |
named |
既定値 |
none |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
- PhysicalComputerConfig