Clear-PcsvDeviceLog

適用対象: Windows 10 Technical Preview, Windows Server Technical Preview

Clear-PcsvDeviceLog

Clears the System Event Log for a PCSV device.

構文

Parameter Set: ByComputerName
Clear-PcsvDeviceLog [-TargetAddress] <String> [-Credential] <PSCredential> [-ManagementProtocol] <ManagementProtocol> {WSMan | IPMI} [[-Port] <UInt16> ] [-Authentication <Authentication> {Default | Basic | Digest} ] [-CimSession <CimSession[]> ] [-PassThru] [-SkipCACheck] [-SkipCNCheck] [-SkipRevocationCheck] [-ThrottleLimit <Int32> ] [-TimeoutSec <UInt32> ] [-UseSSL] [ <CommonParameters>]

Parameter Set: ByNoConnectionParams
Clear-PcsvDeviceLog [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-TimeoutSec <UInt32> ] [ <CommonParameters>]

Parameter Set: InputObject (cdxml)
Clear-PcsvDeviceLog [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

詳細説明

The Clear-PcsvDeviceLog cmdlet clears the System Event Log for a Physical Computer System View (PCSV) device. This cmdlet currently supports devices that use the Intelligent Platform Management Interface (IPMI) protocol. You can use this cmdlet for both in-band and out-of-band connections. To use this cmdlet with an in-band connection, you must have elevated privileges.

パラメーター

-Authentication<Authentication>

Specifies an authentication method to use for devices managed by WS-Management. Do not specify this parameter for devices managed by using IPMI. このパラメーターに指定できる値は、次のとおりです。

-- Basic
-- Digest
-- Default

-CimSession<CimSession[]>

リモート セッションまたはリモート コンピューターでコマンドレットを実行します。コンピューター名またはセッション オブジェクト (New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など) を入力します。既定値は、ローカル コンピューター上の現在のセッションです。

-Credential<PSCredential>

Specifies a PSCredential object based on a user name and password. To obtain a PSCredential object, use the Get-Credential cmdlet. For more information, type Get-Help Get-Credential. For IPMI devices, specify credentials that correspond to a user with Administrator privileges on the device.

-ManagementProtocol<ManagementProtocol>

Specifies a management protocol used to communicate with a device. このパラメーターに指定できる値は、次のとおりです。

-- WSMAN
-- IPMI

This cmdlet currently supports only devices that use the IPMI protocol.

-PassThru

作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットから出力は生成されません。

-Port<UInt16>

Specifies a port on the remote computer to use for the management connection. If you do not specify a port, the cmdlet uses the following default ports:

-- IPMI and WSMAN over HTTP. Port 623.
-- WSMAN over HTTPS. Port 664.

-SkipCACheck

Indicates that the client connects by using HTTPS without validating that a trusted certification authority (CA) signed the server certificate. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.

Do not specify this parameter unless you can establish trust in another way, such as if the remote computer is part of a network that is physically secure and isolated, or if the remote computer is a trusted host in a Windows Remote Management (WinRM) configuration.

-SkipCNCheck

Indicates that the certificate common name (CN) of the server does not need to match the host name of the server. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.

Specify this parameter only for managing devices by using WSMAN over HTTPS. Be sure to specify this parameter only for trusted computers.

-SkipRevocationCheck

Indicates that the cmdlet skips the revocation check of server certificates.

Be sure to specify this parameter only for trusted computers.

-TargetAddress<String>

Specifies the name or IP address of the remote hardware device.

-ThrottleLimit<Int32>

コマンドレットを実行する際に確立できる同時実行操作の最大数を指定します。このパラメーターを省略するか、値 0 を入力した場合、コンピューター上で実行されている CIM コマンドレットの数に基づいて、コマンドレットに最適なスロットル制限が Windows PowerShell® によって計算されます。スロットル制限は、セッションやコンピューターではなく、現在のコマンドレットにのみ適用されます。

-TimeoutSec<UInt32>

Specifies how long to wait, in seconds, for a response from the remote hardware device. After this period, the cmdlet abandons the connection attempt.

-UseSSL

Indicates that the server connects to the target computer by using SSL. WSMAN encrypts all content transmitted over the network. Specify this parameter to use the additional protection of HTTPS instead of HTTP. If you specify this parameter and SSL is not available on the connection port, the command fails.

<CommonParameters>

このコマンドレットは共通のパラメーターをサポートしています(-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、および -OutVariable)。詳細については、TechNet の「 「about_CommonParameters」 (https://go.microsoft.com/fwlink/p/?LinkID=113216) を参照してください。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

出力

出力型は、コマンドレットが出力するオブジェクトの型です。

• Microsoft.Management.Infrastructure.CimInstance, Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/HardwareManagement/MSFT_PCSVDevice

  This cmdlet returns a PCSV device object, if you specify the PassThru parameter.

説明

• This cmdlet clears the System Event Log. For devices that support the IPMI Reserve SEL command, the cmdlet first tries to make a SEL reservation. If the reservation becomes invalid due to a more recent event, the cmdlet fails. If the cmdlet fails, try again.

使用例

Example 1: Clear the log for a device

The first command uses the Get-Credential cmdlet to create a credential, and then stores it in the $Credential variable. The cmdlet prompts you for a user name and password. For more information, type Get-Help Get-Credential.

The second command clears the System Event Log for the device that has the specified IP address. The command uses the credential stored in $Credential.

PS C:\> $Credential = Get-Credential Admin
PS C:\> Clear-PcsvDeviceLog -TargetAddress "10.1.2.3" -Credential $Credential -ManagementProtocol IPMI

Example 2: Clear the log for a device by using the pipeline

The first command uses Get-Credential to create a credential, and then stores it in the $Credential variable.

The second command uses the Get-PcsvDevice cmdlet to get the device that has the specified IP address. That cmdlet uses the credential stored in $Credential. The command passes that device to the current cmdlet by using the pipeline operator. The current cmdlet clears the System Event Log on that device.

PS C:\> $Credential = Get-Credential Admin
PS C:\> Get-PcsvDevice -TargetAddress "10.1.2.3" -Credential $Credential -ManagementProtocol IPMI | Clear-PcsvDeviceLog 

関連項目

Get-PcsvDeviceLog

Get-PcsvDevice