Set-NetIPv6Protocol
Set-NetIPv6Protocol
Modifies the IPv6 protocol configuration.
構文
Parameter Set: InputObject (cdxml)
Set-NetIPv6Protocol [-AddressMaskReply <AddressMaskReply> {Disabled | Enabled} ] [-CimSession <CimSession[]> ] [-DefaultHopLimit <UInt32> ] [-DhcpMediaSense <DhcpMediaSense> {Disabled | Enabled} ] [-GroupForwardedFragments <GroupForwardedFragments> {Disabled | Enabled} ] [-IcmpRedirects <IcmpRedirects> {Disabled | Enabled} ] [-MaxTemporaryDadAttempts <UInt32> ] [-MaxTemporaryDesyncTime <TimeSpan> ] [-MaxTemporaryPreferredLifetime <TimeSpan> ] [-MaxTemporaryValidLifetime <TimeSpan> ] [-MediaSenseEventLog <MediaSenseEventLog> {Disabled | Enabled} ] [-MldLevel <MldLevel> {None | SendOnly | All} ] [-MldVersion <MldVersion> {Version1 | Version2} ] [-MulticastForwarding <MulticastForwarding> {Disabled | Enabled} ] [-NeighborCacheLimitEntries <UInt32> ] [-PassThru] [-RandomizeIdentifiers <RandomizeIdentifiers> {Disabled | Enabled} ] [-ReassemblyLimitBytes <UInt32> ] [-RouteCacheLimitEntries <UInt32> ] [-SourceRoutingBehavior <SourceRoutingBehavior> {Forward | DontForward | Drop} ] [-TemporaryRegenerateTime <TimeSpan> ] [-ThrottleLimit <Int32> ] [-UseTemporaryAddresses <UseTemporaryAddresses> {Disabled | Enabled | Always} ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
詳細説明
The Set-NetIPv6Protocol cmdlet modifies the global IPv6 protocol configuration for a computer. If you do not specify any parameters for the cmdlet, the cmdlet sets the default values for the IPv6 protocol configuration.
パラメーター
-AddressMaskReply<AddressMaskReply>
Specifies a value for address mask reply. The cmdlet modifies the value for this setting. Address mask reply specifies how the computer responds to ICMP address mask packets. このパラメーターに指定できる値は、次のとおりです。
-- Enabled. The computer responds to ICMP address mask packets.
-- Disabled. The computer does not respond to ICMP address mask packets.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。コンピューター名またはセッション オブジェクト (New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など) を入力します。既定値は、ローカル コンピューター上の現在のセッションです。
Aliases |
Session |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-DefaultHopLimit<UInt32>
Specifies a value for the default hop limit. The cmdlet modifies the value for this setting. This parameter sets the default value for the CurrentHopLimit property in the IP interface. The current hop limit is the value that the IP interface writes in the hop limit field in all outbound IPv6 traffic. When routers forward a packet, they decrement the hop limit by 1 and discard the packet when the hop limit is 0. The default value is 128.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-DhcpMediaSense<DhcpMediaSense>
Specifies a value for Media Sense. The cmdlet modifies the value for this setting.
Media Sense provides a mechanism for the network adapter to notify the protocol stack of media connect and disconnect events. These events trigger the DHCP client to take an action, such as attempting to renew a DHCP lease or removing routes that are related to a disconnected network. When Media Sense is enabled, the network parameters on the laptop of a roaming user are automatically and transparently updated without requiring a restart when the user moves from one location to another. このパラメーターに指定できる値は、次のとおりです。
-- Enabled
-- Disabled
The default value is Enabled.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-GroupForwardedFragments<GroupForwardedFragments>
Specifies a value for group forwarded fragments. The cmdlet modifies the value for this setting. Group forwarded fragments specifies whether the IP interface collects fragments into groups before it forwards the fragments. This parameter sets the GroupForwardedFragments property in the IP interface. このパラメーターに指定できる値は、次のとおりです。
-- Enabled. The IP interface collects IPv6 protocol fragments into groups before it forwards the fragments.
-- Disabled. The IP interface does not collect IPv6 protocol fragments into groups before it forwards the fragments.
The default value is Disabled.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-IcmpRedirects<IcmpRedirects>
Specifies a value for Internet Control Message Protocol (ICMP) redirect. The cmdlet modifies the value for this setting. ICMP redirect specifies whether to update the path cache in response to ICMP redirect packets. This parameter sets the IcmpRedirects property in the IP interface. このパラメーターに指定できる値は、次のとおりです。
-- Enabled. The IP interface updates the path cache in response to ICMP redirect packets.
-- Disabled. The IP interface does not update the path cache in response to ICMP redirect packets.
The default value is Enabled.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-MaxTemporaryDadAttempts<UInt32>
Specifies a value for the maximum number of duplicate address detection attempts for temporary addresses. The cmdlet modifies the value for this setting.
Aliases |
MaxDadAttempts |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-MaxTemporaryDesyncTime<TimeSpan>
Specifies a value for the maximum time to desynchronize temporary address preferred lifetimes. The cmdlet modifies the value for this setting.
Aliases |
MaxRandomTime |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-MaxTemporaryPreferredLifetime<TimeSpan>
Specifies an array of values, as TimeSpan objects, for the maximum preferred lifetime over which to prefer a temporary address. The cmdlet gets IPv6 protocol configurations that have these values.
Aliases |
MaxPreferredLifetime |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-MaxTemporaryValidLifetime<TimeSpan>
Specifies a value, as a TimeSpan object, for the maximum lifetime over which a temporary address is valid. The cmdlet modifies the value for this setting.
Aliases |
MaxValidLifetime |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-MediaSenseEventLog<MediaSenseEventLog>
Specifies a value for Media Sense event log. The cmdlet modifies the value for this setting. このパラメーターに指定できる値は、次のとおりです。
-- Enabled. The IP interface logs DHCP Media Sense events in the event log for troubleshooting purposes.
-- Disabled. The IP interface does not log DHCP Media Sense events in the event log.
The default value is Disabled.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-MldLevel<MldLevel>
Specifies a value for the level of Multicast Listener Discovery (MLD) support. The cmdlet modifies the value for this setting. このパラメーターに指定できる値は、次のとおりです。
-- All. The computer can send and receive multicast packets.
-- None. The computer cannot send or receive multicast packets.
-- SendOnly. The computer can send but not receive multicast packets.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-MldVersion<MldVersion>
Specifies a value for the maximum version of Multicast Listener Discovery that the host supports. The cmdlet modifies the value for this setting.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-MulticastForwarding<MulticastForwarding>
Specifies a value for multicast forwarding. The cmdlet modifies the value for this setting. このパラメーターに指定できる値は、次のとおりです。
-- Enabled. The computer can forward multicast packets.
-- Disabled. The computer cannot forward multicast packets.
The default value is Disabled.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-NeighborCacheLimitEntries<UInt32>
Specifies the maximum number of neighbor cache entries. The cmdlet modifies the value for this setting.
The default value is 256.
Aliases |
NeighborCacheLimit |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-PassThru
作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットから出力は生成されません。
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-RandomizeIdentifiers<RandomizeIdentifiers>
Specifies a value for the randomization of identifiers. The cmdlet modifies the value for this setting. このパラメーターに指定できる値は、次のとおりです。
-- Enabled. The IP interface randomizes identifiers when it creates an IP address.
-- Disabled. The IP interface does not randomize identifiers when it creates an IP address.
The default value is Enabled.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-ReassemblyLimitBytes<UInt32>
Specifies a value for the maximum size of the reassembly buffer. The cmdlet modifies the value for this setting.
Aliases |
ReassemblyLimit |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-RouteCacheLimitEntries<UInt32>
Specifies a value for the maximum number of route cache entries. The cmdlet modifies the value for this setting.
The default value is 128.
Aliases |
RouteCacheLimit |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-SourceRoutingBehavior<SourceRoutingBehavior>
Specifies a value for source routing behavior. The cmdlet modifies the value for this setting. このパラメーターに指定できる値は、次のとおりです。
-- DontForward. The computer can receive but not forward source-routed packets.
-- Drop. The computer drops source-routed packets.
The default value is DontForward.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-TemporaryRegenerateTime<TimeSpan>
Specifies a value, as a TimeSpan object, for the time prior to deprecating a temporary address when a new address is generated.
The cmdlet modifies the value for this setting.
Aliases |
RegenerateTime |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-ThrottleLimit<Int32>
コマンドレットを実行する際に確立できる同時実行操作の最大数を指定します。このパラメーターを省略するか、値 0
を入力した場合、コンピューター上で実行されている CIM コマンドレットの数に基づいて、コマンドレットに最適なスロットル制限が Windows PowerShell® によって計算されます。スロットル制限は、セッションやコンピューターではなく、現在のコマンドレットにのみ適用されます。
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-UseTemporaryAddresses<UseTemporaryAddresses>
Specifies a value for temporary addresses. The cmdlet modifies the value for this setting.
-- Always. The computer always generates temporary addresses by using random numbers.
-- Counter. The computer generates temporary addresses by using the interface identifier. You typically use this identifier for test purposes.
-- Disabled. The computer does not use temporary addresses.
-- Enabled. The computer uses temporary addresses.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-Confirm
コマンドレットを実行する前に確認メッセージを表示します。
必須/オプション |
false |
位置 |
named |
既定値 |
false |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-WhatIf
コマンドレットが実行された場合に何が起きるのかを示します。コマンドレットは実行されません。
必須/オプション |
false |
位置 |
named |
既定値 |
false |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
<CommonParameters>
このコマンドレットは共通のパラメーターをサポートしています(-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、および -OutVariable)。詳細については、TechNet の「 「about_CommonParameters」 (https://go.microsoft.com/fwlink/p/?LinkID=113216) を参照してください。
<WorkflowParameters>
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetIPv6Protocol
Microsoft.Management.Infrastructure.CimInstance
オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。基になる WMI オブジェクトの名前空間とクラス名は、シャープ記号 (#
) に続くパスで指定されます。
出力
出力型は、コマンドレットが出力するオブジェクトの型です。
- None
使用例
Example 1: Enable the DHCP Media Sense event log
This command enables the DHCP Media Sense event log.
PS C:\> Set-NetIPv6Protocol –MediaSenseEventLog Enabled
Example 2: Increase the number of neighbors
This command increases the size of the cache of on-link neighbors on the subnet to 1,000. The default value is 256.
PS C:\> Set-NetIPv6Protocol –NeighborCacheLimitEntries 1000