New-VMSwitch
New-VMSwitch
Creates a new virtual switch on one or more virtual machine hosts.
構文
Parameter Set: NetAdapterName
New-VMSwitch [-Name] <String> -NetAdapterName <String[]> [-AllowManagementOS <Boolean> ] [-CimSession <Microsoft.Management.Infrastructure.CimSession[]> ] [-ComputerName <String[]> ] [-Credential <System.Management.Automation.PSCredential[]> ] [-EnableEmbeddedTeaming <Nullable [System.Boolean]> ] [-EnableIov <Boolean]> ] [-EnablePacketDirect <Nullable [System.Boolean]> ] [-MinimumBandwidthMode <VMSwitchBandwidthMode> {Default | Weight | Absolute | None} ] [-NATSubnetAddress <System.String> ] [-Notes <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: NetAdapterInterfaceDescription
New-VMSwitch [-Name] <String> -NetAdapterInterfaceDescription <String[]> [-AllowManagementOS <Boolean> ] [-CimSession <Microsoft.Management.Infrastructure.CimSession[]> ] [-ComputerName <String[]> ] [-Credential <System.Management.Automation.PSCredential[]> ] [-EnableEmbeddedTeaming <Nullable [System.Boolean]> ] [-EnableIov <Boolean]> ] [-EnablePacketDirect <Nullable [System.Boolean]> ] [-MinimumBandwidthMode <VMSwitchBandwidthMode> {Default | Weight | Absolute | None} ] [-NATSubnetAddress <System.String> ] [-Notes <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: SwitchType
New-VMSwitch [-Name] <String> -SwitchType <VMSwitchType> {Private | Internal | External | NAT} [-CimSession <Microsoft.Management.Infrastructure.CimSession[]> ] [-ComputerName <String[]> ] [-Credential <System.Management.Automation.PSCredential[]> ] [-EnableEmbeddedTeaming <Nullable [System.Boolean]> ] [-EnableIov <Boolean]> ] [-EnablePacketDirect <Nullable [System.Boolean]> ] [-MinimumBandwidthMode <VMSwitchBandwidthMode> {Default | Weight | Absolute | None} ] [-NATSubnetAddress <System.String> ] [-Notes <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
詳細説明
The New-VMSwitch cmdlet creates a new virtual switch on one or more virtual machine hosts.
パラメーター
-AllowManagementOS<Boolean>
Specifies whether the parent partition (i.e. the management operating system) is to have access to the physical NIC bound to the virtual switch to be created.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-CimSession<Microsoft.Management.Infrastructure.CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。コンピューター名またはセッション オブジェクト (New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など) を入力します。既定値は、ローカル コンピューター上の現在のセッションです。
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
true(ByPropertyName) |
ワイルドカード文字の受け入れ |
false |
-ComputerName<String[]>
Specifies one or more Hyper-V hosts on which the virtual switch is to be created. NetBIOS names, IP addresses, and fully qualified domain names are allowable. The default is the local computer. Use localhost or a dot (.) to specify the local computer explicitly.
Aliases |
PSComputerName |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
True (ByPropertyName) |
ワイルドカード文字の受け入れ |
false |
-Credential<System.Management.Automation.PSCredential[]>
Specifies one or more user accounts that have permission to perform this action. The default is the current user.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
true(ByPropertyName) |
ワイルドカード文字の受け入れ |
false |
-EnableEmbeddedTeaming<Nullable [System.Boolean]>
Specifies whether this cmdlet enables teaming for the virtual switch.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-EnableIov<Boolean]>
Specifies that IO virtualization is to be enabled on the virtual switch to be created.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-EnablePacketDirect<Nullable [System.Boolean]>
Specifies whether this cmdlet enables the packet direct path through the virtual switch. The default value is $False.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-MinimumBandwidthMode<VMSwitchBandwidthMode>
Specifies how minimum bandwidth is to be configured on the virtual switch. Allowed values are Absolute, Default, None, or Weight. If Absolute is specified, minimum bandwidth is bits per second. If Weight is specified, minimum bandwidth is a value ranging from 1 to 100. If None is specified, minimum bandwidth is disabled on the switch – that is, users cannot configure it on any network adapter connected to the switch. If Default is specified, the system will set the mode to Weight, if the switch is not IOV-enabled, or None if the switch is IOV-enabled.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-Name<String>
Specifies the name of the switch to be created.
Aliases |
SwitchName |
必須/オプション |
true |
位置 |
1 |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-NATSubnetAddress<System.String>
Specifies network address translation (NAT) subnet address for a NAT virtual switch.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-Notes<String>
Specifies a note to be associated with the switch to be created.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-SwitchType<VMSwitchType>
Specifies the type of the switch to be created. Allowed values are Internal and Private. To create an External virtual switch, specify either the NetAdapterInterfaceDescription or the NetAdapterName parameter, which implicitly set the type of the virtual switch to External.
Aliases |
none |
必須/オプション |
true |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-NetAdapterInterfaceDescription<String[]>
Specifies the interface description of the network adapter to be bound to the switch to be created. You can use the Get-NetAdapter cmdlet to get the interface description of a network adapter.
Aliases |
InterfaceDescription |
必須/オプション |
true |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
True (ByPropertyName) |
ワイルドカード文字の受け入れ |
false |
-NetAdapterName<String[]>
Specifies the name of the network adapter to be bound to the switch to be created. You can use the Get-NetAdapter cmdlet to get the interface description of a network adapter.
Aliases |
InterfaceAlias |
必須/オプション |
true |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
True (ByPropertyName) |
ワイルドカード文字の受け入れ |
false |
-Confirm
コマンドレットを実行する前に確認メッセージを表示します。
必須/オプション |
false |
位置 |
named |
既定値 |
false |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-WhatIf
コマンドレットが実行された場合に何が起きるのかを示します。コマンドレットは実行されません。
必須/オプション |
false |
位置 |
named |
既定値 |
false |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
<CommonParameters>
このコマンドレットは共通のパラメーターをサポートしています(-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、および -OutVariable)。詳細については、TechNet の「 「about_CommonParameters」 (https://go.microsoft.com/fwlink/p/?LinkID=113216) を参照してください。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
出力
出力型は、コマンドレットが出力するオブジェクトの型です。
- Microsoft.HyperV.PowerShell.EthernetSwitch
使用例
Example 1
Creates a new switch QoS switch, which binds to a network adapter called Wired Ethernet Connection 3 and supports weight-based minimum bandwidth.
PS C:\> New-VMSwitch "QoS Switch" -NetAdapterName "Wired Ethernet Connection 3" -MinimumBandwidthMode Weight