Get-StoragePool

Get-StoragePool

Gets a specific storage pool, or a set of StoragePool objects either from all storage subsystems across all storage providers, or optionally a filtered subset based on specific parameters.

構文

Parameter Set: ByFriendlyName
Get-StoragePool [[-FriendlyName] <String[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-HealthStatus <HealthStatus[]> ] [-IsPrimordial <Boolean[]> ] [-ThrottleLimit <Int32> ] [-Usage <Usage[]> ] [ <CommonParameters>]

Parameter Set: ByName
Get-StoragePool [-AsJob] [-CimSession <CimSession[]> ] [-HealthStatus <HealthStatus[]> ] [-IsPrimordial <Boolean[]> ] [-Name <String[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: ByPhysicalDisk
Get-StoragePool [-AsJob] [-CimSession <CimSession[]> ] [-HealthStatus <HealthStatus[]> ] [-IsPrimordial <Boolean[]> ] [-PhysicalDisk <CimInstance> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: ByResiliencySetting
Get-StoragePool [-AsJob] [-CimSession <CimSession[]> ] [-HealthStatus <HealthStatus[]> ] [-IsPrimordial <Boolean[]> ] [-ResiliencySetting <CimInstance> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: ByStorageJob
Get-StoragePool [-AsJob] [-CimSession <CimSession[]> ] [-HealthStatus <HealthStatus[]> ] [-IsPrimordial <Boolean[]> ] [-StorageJob <CimInstance> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: ByStorageNode
Get-StoragePool [-AsJob] [-CimSession <CimSession[]> ] [-HealthStatus <HealthStatus[]> ] [-IsPrimordial <Boolean[]> ] [-StorageNode <CimInstance> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: ByStorageSubSystem
Get-StoragePool [-AsJob] [-CimSession <CimSession[]> ] [-HealthStatus <HealthStatus[]> ] [-IsPrimordial <Boolean[]> ] [-StorageSubSystem <CimInstance> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: ByStorageTier
Get-StoragePool [-AsJob] [-CimSession <CimSession[]> ] [-HealthStatus <HealthStatus[]> ] [-IsPrimordial <Boolean[]> ] [-StorageTier <CimInstance> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: ByUniqueId
Get-StoragePool [-AsJob] [-CimSession <CimSession[]> ] [-HealthStatus <HealthStatus[]> ] [-IsPrimordial <Boolean[]> ] [-ThrottleLimit <Int32> ] [-UniqueId <String[]> ] [ <CommonParameters>]

Parameter Set: ByUsage
Get-StoragePool [-AsJob] [-CimSession <CimSession[]> ] [-HealthStatus <HealthStatus[]> ] [-IsPrimordial <Boolean[]> ] [-OtherUsageDescription <String[]> ] [-ThrottleLimit <Int32> ] [-Usage <Usage[]> ] [ <CommonParameters>]

Parameter Set: ByVirtualDisk
Get-StoragePool [-AsJob] [-CimSession <CimSession[]> ] [-HealthStatus <HealthStatus[]> ] [-IsPrimordial <Boolean[]> ] [-ThrottleLimit <Int32> ] [-VirtualDisk <CimInstance> ] [ <CommonParameters>]

詳細説明

The Get-StoragePool cmdlet returns either a specific storage pool, or a set of StoragePool objects either from all storage subsystems across all storage providers, or optionally a filtered subset based on specific parameters.

パラメーター

-AsJob

-CimSession<CimSession[]>

リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。

-FriendlyName<String[]>

Specifies the friendly name of the storage pool to get.

-HealthStatus<HealthStatus[]>

Specifies the health status(es) of the storage pool to get. Specify one or more of the following values: Healthy, Warning, Unhealthy, or Unknown.

-IsPrimordial<Boolean[]>

Specifies whether to get (concrete) storage pools or primordial storage pools (which store physical disks that have yet to be added to a concrete storage pool). To get (concrete) storage pools, specify the $False Boolean value. To get primordial pools, specify the $True Boolean value.

-Name<String[]>

Specifies the name of the storage pool to get.

-OtherUsageDescription<String[]>

Gets any storage pools that match the specified OtherUsageDescription string.

-PhysicalDisk<CimInstance>

Gets the storage pool that contains the specified PhysicalDisk object. Enter a PhysicalDisk CIM object. The Physical Disk CIM object is exposed by the Get-PhysicalDisk cmdlet.

-ResiliencySetting<CimInstance>

Gets the storage pool associated with the specified ResiliencySetting object. Enter a single ResiliencySetting CIM object as input, or pipe multiple ResiliencySetting objects to the Get-StoragePool cmdlet to view all pools that support the specified resiliency setting. Resiliency Setting CIM objects are exposed by the Get-ResiliencySetting cmdlet.

-StorageJob<CimInstance>

Specifies an outstanding storage job as a CimInstance object. The cmdlet gets the storage pools associated with the storage job that you specify. To obtain a storage job, use the Get-StorageJob cmdlet.

-StorageNode<CimInstance>

Specifies a storage node as a CimInstance object. The cmdlet gets storage pools that have read-write access on the node that you specify. To obtain a storage node object, use the Get-StorageNode cmdlet.

-StorageSubSystem<CimInstance>

Accepts a StorageSubsystem object as input. The Storage Subsystem CIM object is exposed by the Get-StorageSubsystem cmdlet.

-StorageTier<CimInstance>

Specifies a storage tier as a CimInstance object. The cmdlet gets storage pools that contain the storage tier that you specify. To obtain a storage tier object, use the Get-StorageTier cmdlet.

-ThrottleLimit<Int32>

このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0 を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。

-UniqueId<String[]>

Specifies the UniqueID of the storage pool to get. If the UniqueID includes brackets, enclose the string in quotation marks.

-Usage<Usage[]>

Gets any storage pools that match the specified Usage value. Acceptable values: ReservedAsDeltaReplicaContainer, ReservedForComputerSystem, ReservedForLocalReplicationServices, ReservedForMigrationServices, ReservedForRemoteReplicationServices, ReservedForSparing, Unknown, Unrestricted, and Other

-VirtualDisk<CimInstance>

Gets the storage pool associated with the specified virtual disk object. Enter a VirtualDisk CIM object. The Virtual Disk CIM object is exposed by the Get-VirtualDisk cmdlet.

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

• Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_PhysicalDisk

  You can use the pipeline operator to pass an MSFT_PhysicalDisk object to the PhysicalDisk parameter to get the storage pool associated with the PhysicalDisk object.

• Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_ResiliencySetting

  You can use the pipeline operator to pass an MSFT_ResiliencySetting object to the ResiliencySetting parameter to get the storage pool associated with the ResiliencySetting object.

• Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_StorageNode

  You can use the pipeline operator to pass an MSFT_StorageNode object to the StorageNode parameter to get the storage pool associated with the StorageNode object.

• Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_StorageSubsystem

  You can use the pipeline operator to pass an MSFT_StorageSubsystem object to the StorageSubsystem parameter to get the storage pool associated with the StorageSubsystem object.

• Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_StorageTier

  You can use the pipeline operator to pass an MSFT_StorageTier object to the StorageTier parameter to get the storage pool associated with the StorageTier object.

• Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_VirtualDisk

  You can use the pipeline operator to pass an MSFT_VirtualDisk object to the VirtualDisk parameter to get the storage pool associated with the VirtualDisk object.

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

• Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_StoragePool

  The Get-StoragePool cmdlet returns objects representing storage pools.

注

• To reduce load times, storage providers other than the Storage Spaces provider might not perform a full discovery of objects on initial load. As a result, this cmdlet might show an empty or incomplete listing of objects from a particular storage provider. To update the storage provider cache so that storage objects are available from a storage provider, use the Update-StorageProviderCache cmdlet.

• Microsoft.Management.Infrastructure.CimInstance オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。

例

Example 1: Get all storage pools

This example lists all storage pools, (when run without parameter) from all Storage Management Providers, from all storage subsystems. This list may optionally be filtered using one or more parameters.

PS C:\> Get-StoragePool

Example 2: Get all storage pools (not including primordial pools)

This example lists all (concrete) storage pools, excluding primordial pools (which store physical disks that have yet to be added to a concrete storage pool).

PS C:\> Get-StoragePool -IsPrimordial $False

Example 3: Get all storage pools that support the Mirror resiliency setting

This example uses the Get-ResiliencySetting cmdlet to retrieve ResiliencySetting objects that represent each storage pool that supports the specified resiliency setting (also known as storage layout), in this case Mirror, and then pipes the array of objects to the Get-StoragePool cmdlet.

PS C:\> Get-ResiliencySetting -Name Mirror | Get-StoragePool

関連トピック

New-StoragePool

Remove-StoragePool

Set-StoragePool

Get-StorageJob

Get-StorageNode

Get-StorageTier