Add-InitiatorIdToMaskingSet
Add-InitiatorIdToMaskingSet
Adds an initiator ID to an existing masking set, granting the host associated with the initiator ID access to the virtual disk and target port resources defined in the masking set.
構文
Parameter Set: ByFriendlyName
Add-InitiatorIdToMaskingSet [-MaskingSetFriendlyName] <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-HostType <HostType> ] [-InitiatorIds <String[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByUniqueId
Add-InitiatorIdToMaskingSet -MaskingSetUniqueId <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-HostType <HostType> ] [-InitiatorIds <String[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Add-InitiatorIdToMaskingSet -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-HostType <HostType> ] [-InitiatorIds <String[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
詳細説明
The Add-InitiatorIdToMaskingSet cmdlet adds an initiator ID to an existing masking set, granting the host associated with the initiator ID access to the virtual disk and target port resources defined in the masking set.
パラメーター
-AsJob
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。
エイリアス |
Session |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-HostType<HostType>
Specifies the host operating system or other host environmental factors that may influence the behavior that the storage system should have when showing a virtual disk to an initiator.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-InitiatorIds<String[]>
Specifies one or more initiator IDs on which this cmdlet acts. The initiator IDs will be added to this masking set. Note: The initiator IDs do not need to be displayed in the output of the Get-InitiatorId cmdlet to be added to a masking set.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-InputObject<CimInstance[]>
Accepts a MaskingSet object from the pipeline as input.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
-MaskingSetFriendlyName<String[]>
Specifies the friendly name of the masking set to which you want to add an initiator ID.
エイリアス |
なし |
必須? |
true |
位置は? |
1 |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-MaskingSetUniqueId<String[]>
Specifies the unique ID of the masking set to which you want to add an initiator ID.
エイリアス |
Id |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-PassThru
Specifies that the cmdlet should output an object representing the masking setto which it added an initiator ID. By default, this cmdlet does not generate any output.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-ThrottleLimit<Int32>
このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0
を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Confirm
コマンドレットを実行する前に、ユーザーに確認を求めます。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-WhatIf
コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_MaskingSet
You can pipe one or more MSFT_MaskingSet objects to the InputObject parameter.
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_MaskingSet
If you specify the Passthru parameter, this cmdlet outputs an object that represents the masking set to which you added an initiator ID.
注
Microsoft.Management.Infrastructure.CimInstance
オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#
) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。
例
Example 1: Adding an InitiatorID to a masking set by masking set object
This example shows getting Fibre Channel initiator ports from the Srv1 computer, then getting the masking set object for the Cluster1MaskingSet, then enabling Srv1 access to all virtual disks defined in the masking set.
PS C:\> $fcPorts = Get-InitiatorPort -CimSession Srv1 -ConnectionType FibreChannel
PS C:\> $maskingSet = Get-MaskingSet Cluster1MaskingSet
PS C:\> $fcPorts.NodeAddress 2000001b328d33cd2001001b32ad33cd
PS C:\> $maskingSet | Add-InitiatorIdToMaskingSet -InitiatorIds $fcPorts.NodeAddress
関連トピック
Get-InitiatorID