Add-PartitionAccessPath
Add-PartitionAccessPath
Adds an access path such as a drive letter or folder to a partition.
構文
Parameter Set: ByNumber
Add-PartitionAccessPath [-DiskNumber] <UInt32[]> [-PartitionNumber] <UInt32[]> [[-AccessPath] <String> ] [-AsJob] [-AssignDriveLetter] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByDriveLetter
Add-PartitionAccessPath [[-AccessPath] <String> ] -DriveLetter <Char[]> [-AsJob] [-AssignDriveLetter] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ById
Add-PartitionAccessPath [[-AccessPath] <String> ] -DiskId <String[]> -Offset <UInt64[]> [-AsJob] [-AssignDriveLetter] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Add-PartitionAccessPath [[-AccessPath] <String> ] -InputObject <CimInstance[]> [-AsJob] [-AssignDriveLetter] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
詳細説明
The Add-PartitionAccessPath cmdlet adds an access path such as a drive letter or folder to a partition. Access paths can be either a drive letter or a mount point.
パラメーター
-AccessPath<String>
Assigns an access path to the partition. An access path can be a drive letter (for example, "C:" or "C:\") or a path to an empty directory on an NTFS volume. The access path string does not require a trailing backslash.
エイリアス |
なし |
必須? |
false |
位置は? |
3 |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-AsJob
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-AssignDriveLetter
Assigns the next available drive letter to the new partition.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。
エイリアス |
Session |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-DiskId<String[]>
Specifies an ID used to identify a disk in the system.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-DiskNumber<UInt32[]>
Specifies the number of the disk.
エイリアス |
なし |
必須? |
true |
位置は? |
1 |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-DriveLetter<Char[]>
Specifies a letter used to identify a drive or volume in the system.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-InputObject<CimInstance[]>
Accepts a Partition object from the pipeline as input. Enter a Partition CIM object, which you can get by using the Get-Partition cmdlet.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
-Offset<UInt64[]>
Specifies the starting offset, in bytes.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-PartitionNumber<UInt32[]>
Specifies the number of the partition.
エイリアス |
Number |
必須? |
true |
位置は? |
2 |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-PassThru
Specifies that the cmdlet should output an object representing the partition to which you added an access path. By default, this cmdlet does not generate any output.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-ThrottleLimit<Int32>
このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0
を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Confirm
コマンドレットを実行する前に、ユーザーに確認を求めます。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-WhatIf
コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_Partition
You can pipe a Partition object to the InputObject parameter to specify the partition to which you want to add an access path.
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_Partition
If you specify the Passthru parameter, this cmdlet outputs a Partition object representing the partition on which you added an access path.
注
Mounted folders are supported only on NTFS-formatted partitions.
You can only assign a single drive letter to a partition. To change the drive letter, use the Set-Partition cmdlet with the NewDriveLetter parameter.
Microsoft.Management.Infrastructure.CimInstance
オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#
) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。
例
Example 1: Add a drive letter to a partition by disk and partition number
This example adds the access path F: to partition 2 of disk 1.
PS C:\> Add-PartitionAccessPath -DiskNumber 1 -PartitionNumber 2 -AccessPath F: