Get-PartitionSupportedSize
Get-PartitionSupportedSize
Returns information on supported partition sizes for the specified Disk object.
構文
Parameter Set: ByNumber
Get-PartitionSupportedSize [[-DiskNumber] <UInt32[]> ] [[-PartitionNumber] <UInt32[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByDriveLetter
Get-PartitionSupportedSize [-AsJob] [-CimSession <CimSession[]> ] [-DriveLetter <Char[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ById
Get-PartitionSupportedSize [-AsJob] [-CimSession <CimSession[]> ] [-DiskId <String[]> ] [-Offset <UInt64[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Get-PartitionSupportedSize -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
詳細説明
The Get-PartitionSupportedSizes cmdlet returns information on supported partition sizes for the specified Disk object.
パラメーター
-AsJob
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。
エイリアス |
Session |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-DiskId<String[]>
Specifies an ID used to identify a disk in the system.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-DiskNumber<UInt32[]>
Specifies the number of the disk. The number of the disk on which the partition resides.
エイリアス |
なし |
必須? |
false |
位置は? |
1 |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-DriveLetter<Char[]>
Specifies a letter used to identify a drive or volume in the system.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-InputObject<CimInstance[]>
Specifies the Partition object to get. Enter a Partition CIM object, which you can get by using the Get-Partition cmdlet.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
-Offset<UInt64[]>
Specifies the starting offset, in bytes.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-PartitionNumber<UInt32[]>
Specifies the number of the partition.
エイリアス |
Number |
必須? |
false |
位置は? |
2 |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-ThrottleLimit<Int32>
このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0
を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_Partition
You can pipe a Partition object to the InputObject parameter.
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
- System.UInt64
注
Microsoft.Management.Infrastructure.CimInstance
オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#
) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。
例
EXAMPLE 1
This example is not fully implemented and does not include size values.
PS C:\> Get-PartitionSupportedSizes -DiskNumber 3 -PartitionNumber 2