Set-ADReplicationSiteLinkBridge

適用対象: Windows 8.1, Windows PowerShell 4.0, Windows Server 2012 R2

Set-ADReplicationSiteLinkBridge

Sets the properties of a replication site link bridge in Active Directory.

構文

Parameter Set: Default
Set-ADReplicationSiteLinkBridge [-Server <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: Identity
Set-ADReplicationSiteLinkBridge [-Identity] <ADReplicationSiteLinkBridge> [-Add <Hashtable> ] [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Clear <String[]> ] [-Credential <PSCredential> ] [-Description <String> ] [-PassThru] [-Remove <Hashtable> ] [-Replace <Hashtable> ] [-SiteLinksIncluded <Hashtable> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: Instance
Set-ADReplicationSiteLinkBridge [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Credential <PSCredential> ] [-Instance <ADReplicationSiteLinkBridge> ] [-PassThru] [-Confirm] [-WhatIf] [ <CommonParameters>]

詳細説明

The Set-ADReplicationSiteLinkBridge cmdlet sets the properties for a replication site link bridge in Active Directory. A site link bridge connects two or more site links and enables transitivity between site links. Each site link in a bridge must have a site in common with another site link in the bridge.

パラメーター

-Add<Hashtable>

Specifies values to add to an object property. Use this parameter to add one or more values to a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the Lightweight Directory Access Protocol (LDAP) display name. You can specify multiple values to a property by specifying a comma-separated list of values and more than one property by separating them using a semicolon. The format for this parameter is:

-Add @{Attribute1LDAPDisplayName=value1, value2, ...; Attribute2LDAPDisplayName=value1, value2, ...; AttributeNLDAPDisplayName=value1, value2, ...}

When you use the Add, Remove, Replace and Clear parameters together, the operations will be performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-AuthType<ADAuthType>

Specifies the authentication method to use. このパラメーターに対して使用できる値:

-- Negotiate or 0
-- Basic or 1

The default authentication method is Negotiate.

A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.

エイリアス	なし
必須?	false
位置は?	named
既定値	Microsoft.ActiveDirectory.Management.AuthType.Negotiate
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Clear<String[]>

Specifies an array of object properties that will be cleared in the directory. Use this parameter to clear one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:

-Clear Attribute1LDAPDisplayName, Attribute2LDAPDisplayName

When you use the Add, Remove, Replace, and Clear parameters together, the operations will be performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Credential<PSCredential>

Specifies the user account credentials to use to perform this task. The default credentials are the credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the default.

To specify this parameter, you can type a user name, such as User1 or Domain01\User01 or you can specify a PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.

You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can then set the Credential parameter to the PSCredential object.

If the acting credentials do not have directory-level permission to perform the task, Active Directory PowerShell returns a terminating error.

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Description<String>

Specifies a description of the object. This parameter sets the value of the Description property for the object. The LDAP Display Name (ldapDisplayName) for this property is description.

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Identity<ADReplicationSiteLinkBridge>

Specifies an Active Directory object by providing one of the following property values. The identifier in parentheses is the LDAP display name for the attribute. このパラメーターに対して使用できる値:

-- A distinguished name
-- A GUID (objectGUID)

The cmdlet searches the default naming context or partition to find the object. If two or more objects are found, the cmdlet returns a non-terminating error.

This parameter can also get this object through the pipeline or you can set this parameter to an object instance.

エイリアス	なし
必須?	true
位置は?	1
既定値	なし
パイプライン入力を許可する	True (ByValue)
ワイルドカード文字を許可する	false

-Instance<ADReplicationSiteLinkBridge>

Specifies an instance of a site link bridge object to use as a template for a new site link bridge object.

You can use an instance of an existing site link bridge object as a template or you can construct a new site link bridge object by using the Windows PowerShell command line or by using a script.

Method 1: Use an existing site link bridge object as a template for a new object. To retrieve an instance of an existing site link bridge object, use a cmdlet such as Get-ADReplicationSiteLinkBridge. Then provide this object to the Instance parameter of the New-ADReplicationSiteLinkBridge cmdlet to create a new site link bridge object. You can override property values of the new object by setting the appropriate parameters.

Method 2: Create a new ADReplicationSiteLinkBridge and set the property values by using the Windows PowerShell command line interface. Then pass this object to the Instance parameter of the New-ADReplicationSiteLinkBridge cmdlet to create the new Active Directory object.

Note: Specified attributes are not validated, so attempting to set attributes that do not exist or cannot be set will raise an error.

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-PassThru

作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Remove<Hashtable>

Specifies that the cmdlet remove values of an object property. Use this parameter to remove one or more values of a property that cannot be modified using a cmdlet parameter. To remove an object property, you must use the LDAP display name. You can remove more than one property by specifying a semicolon-separated list. The format for this parameter is:

-Remove @{Attribute1LDAPDisplayName=value[]; Attribute2LDAPDisplayName=value[]}

When you use the Add, Remove, Replace, and Clear parameters together, the parameters will be applied in the following sequence:

-- Remove
-- Add
-- Replace
-- Clear

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Replace<Hashtable>

Specifies values for an object property that will replace the current values. Use this parameter to replace one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:

-Replace @{Attribute1LDAPDisplayName=value[], Attribute2LDAPDisplayName=value[]}

When you use the Add, Remove, Replace, and Clear parameters together, the parameters will be applied in the following sequence:

-- Remove
-- Add
-- Replace
-- Clear

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Server<String>

Specifies the Active Directory Domain Services (AD DS) instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: Active Directory Lightweight Directory Services (AD LDS), AD DS, or Active Directory snapshot instance.

Specify the AD DS instance in one of the following ways:

Domain name values:

-- Fully qualified domain name
-- NetBIOS name

Directory server values:

-- Fully qualified directory server name
-- NetBIOS name
-- Fully qualified directory server name and port

The default value for this parameter is determined by one of the following methods in the order that they are listed:

-- By using the Server value from objects passed through the pipeline
-- By using the server information associated with the AD DS Windows PowerShell provider drive, when the cmdlet runs in that drive
-- By using the domain of the computer running Windows PowerShell

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-SiteLinksIncluded<Hashtable>

Specifies the list of site links that are included in this site link bridge. Accepted values for this parameter are the distinguished name (DN), a GUID, or the name of a site link.

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Confirm

コマンドレットを実行する前に、ユーザーに確認を求めます。

必須?	false
位置は?	named
既定値	false
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-WhatIf

コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。

必須?	false
位置は?	named
既定値	false
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

• None or Microsoft.ActiveDirectory.Management.ADReplicationSiteLinkBridge

  A site link bridge object is received by the Identity parameter.

  A site link bridge object that was retrieved by using the Get-ADReplicationSiteLinkBridge cmdlet and then modified is received by the Instance parameter.

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

• None or Microsoft.ActiveDirectory.Management.ADReplicationSiteLinkBridge

例

Example 1: Configure a site link in a site link bridge

This command updates the site link bridge NorthAmerica-Asia to use Europe2 instead of Europe.

PS C:\> Set-ADReplicationSiteLinkBridge -Identity "NorthAmerica-Asia" -SiteLinksIncluded @{Add='NorthAmerica-Europe2','Europe2-Asia';Remove='NorthAmerica-Europe','Europe-Asia'}

Example 2: Configure a filtered list of site link bridges

This command gets all the site link bridges in the directory that includes site links NorthAmerica-Europe and Europe-Asia, and then updates the site link bridge objects to use Europe2 instead of Europe.

PS C:\> Get-ADReplicationSiteLinkBridge -Filter {SiteLinksIncluded -eq "NorthAmerica-Europe" -and SiteLinksIncluded -eq "Europe-Asia"} -Properties SiteLinksIncluded | % {Set-ADReplicationSiteLinkBridge $_ -SiteLinksIncluded @{Add='NorthAmerica-Europe2','Europe2-Asia';Remove='NorthAmerica-Europe','Europe-Asia'}}

関連トピック

Get-ADReplicationSiteLinkBridge

New-ADReplicationSiteLinkBridge

Remove-ADReplicationSiteLinkBridge