Set-ADReplicationSiteLink

適用対象: Windows 8.1, Windows PowerShell 4.0, Windows Server 2012 R2

Set-ADReplicationSiteLink

Sets the properties for an Active Directory site link.

構文

Parameter Set: Default
Set-ADReplicationSiteLink [-Server <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: Identity
Set-ADReplicationSiteLink [-Identity] <ADReplicationSiteLink> [-Add <Hashtable> ] [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Clear <String[]> ] [-Cost <Int32> ] [-Credential <PSCredential> ] [-Description <String> ] [-PassThru] [-Remove <Hashtable> ] [-Replace <Hashtable> ] [-ReplicationFrequencyInMinutes <Int32> ] [-ReplicationSchedule <ActiveDirectorySchedule> ] [-SitesIncluded <Hashtable> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: Instance
Set-ADReplicationSiteLink [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Credential <PSCredential> ] [-Instance <ADReplicationSiteLink> ] [-PassThru] [-Confirm] [-WhatIf] [ <CommonParameters>]

詳細説明

The Set-ADReplicationSiteLink cmdlet sets properties on an Active Directory site link. A site link connects two or more sites. Replication site links reflect the administrative policy for how sites interconnect and the methods used to transfer replication traffic. You must connect sites with site links so that domain controllers at each site can replicate Active Directory changes.

パラメーター

-Add<Hashtable>

Specifies values to add to an object property. Use this parameter to add one or more values to a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the Lightweight Directory Access Protocol (LDAP) display name. You can specify multiple values to a property by specifying a comma-separated list of values and more than one property by separating them using a semicolon. The format for this parameter is:

-Add @{Attribute1LDAPDisplayName=value1, value2, ...; Attribute2LDAPDisplayName=value1, value2, ...; AttributeNLDAPDisplayName=value1, value2, ...}

When you use the Add, Remove, Replace and Clear parameters together, the operations will be performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-AuthType<ADAuthType>

Specifies the authentication method to use. このパラメーターに対して使用できる値:

-- Negotiate or 0
-- Basic or 1

The default authentication method is Negotiate.

A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.

エイリアス	なし
必須?	false
位置は?	named
既定値	Microsoft.ActiveDirectory.Management.AuthType.Negotiate
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Clear<String[]>

Specifies an array of object properties that will be cleared in the directory. Use this parameter to clear one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:

-Clear Attribute1LDAPDisplayName, Attribute2LDAPDisplayName

When you use the Add, Remove, Replace, and Clear parameters together, the operations will be performed in the following order:

-- Remove
-- Add
-- Replace
-- Clear

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Cost<Int32>

Specifies the cost to be placed on the site link. For more information on determining the cost, see Determining the Cost in the TechNet Library: https://go.microsoft.com/fwlink/?LinkId=221871.

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Credential<PSCredential>

Specifies the user account credentials to use to perform this task. The default credentials are the credentials of the currently logged on user unless the cmdlet is run from an Active Directory module for Windows PowerShell provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the default.

To specify this parameter, you can type a user name, such as User1 or Domain01\User01 or you can specify a PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.

You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can then set the Credential parameter to the PSCredential object.

If the acting credentials do not have directory-level permission to perform the task, Active Directory module for Windows PowerShell returns a terminating error.

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Description<String>

Specifies a description of the object. This parameter sets the value of the Description property for the object. The LDAP display name (ldapDisplayName) for this property is description.

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Identity<ADReplicationSiteLink>

Specifies an Active Directory object by providing one of the following property values. The identifier in parentheses is the LDAP display name for the attribute. このパラメーターに対して使用できる値:

-- A distinguished name
-- A GUID (objectGUID)

The cmdlet searches the default naming context or partition to find the object. If two or more objects are found, the cmdlet returns a non-terminating error.

This parameter can also get this object through the pipeline or you can set this parameter to an object instance.

エイリアス	なし
必須?	true
位置は?	1
既定値	なし
パイプライン入力を許可する	True (ByValue)
ワイルドカード文字を許可する	false

-Instance<ADReplicationSiteLink>

Specifies an instance of a site link object to use as a template for a new site link object.

You can use an instance of an existing site link object as a template or you can construct a new site link object by using the Windows PowerShell command line or by using a script.

Method 1: Use an existing site link object as a template for a new object. To retrieve an instance of an existing site link object, use a cmdlet such as Get-ADReplicationSiteLink. Then provide this object to the Instance parameter of the New-ADReplicationSiteLink cmdlet to create a new site link object. You can override property values of the new object by setting the appropriate parameters.

Method 2: Create a new ADReplicationSiteLink and set the property values by using the Windows PowerShell command line interface. Then pass this object to the Instance parameter of the New-ADReplicationSiteLink cmdlet to create the new Active Directory object.

Note: Specified attributes are not validated, so attempting to set attributes that do not exist or cannot be set will raise an error.

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-PassThru

作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Remove<Hashtable>

Specifies that the cmdlet remove values of an object property. Use this parameter to remove one or more values of a property that cannot be modified using a cmdlet parameter. To remove an object property, you must use the LDAP display name. You can remove more than one property by specifying a semicolon-separated list. The format for this parameter is:

-Remove @{Attribute1LDAPDisplayName=value[]; Attribute2LDAPDisplayName=value[]}

When you use the Add, Remove, Replace, and Clear parameters together, the parameters will be applied in the following sequence:

-- Remove
-- Add
-- Replace
-- Clear

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Replace<Hashtable>

Specifies values for an object property that will replace the current values. Use this parameter to replace one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is:

-Replace @{Attribute1LDAPDisplayName=value[], Attribute2LDAPDisplayName=value[]}

When you use the Add, Remove, Replace, and Clear parameters together, the parameters will be applied in the following sequence:

-- Remove
-- Add
-- Replace
-- Clear

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-ReplicationFrequencyInMinutes<Int32>

Species the frequency, in minutes, for which replication will occur where this site link is in use between sites. Active Directory preserves bandwidth between sites by minimizing the frequency of replication and by allowing you to schedule the availability of site links for replication. By default, intersite replication across each site link occurs every 180 minutes (3 hours). You can adjust this frequency to match your specific needs. Be aware that increasing this frequency increases the amount of bandwidth used by replication.

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-ReplicationSchedule<ActiveDirectorySchedule>

Specifies the default replication schedule for any connections within this site link (intra-site replication). This allows you to schedule the availability of site links for use by replication. By default, a site link is available to carry replication traffic 24 hours a day, 7 days a week. You can limit this schedule to specific days of the week and times of day. You can, for example, schedule intersite replication so that it only occurs after normal business hours.

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Server<String>

Specifies the Active Directory Domain Services (AD DS) instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: Active Directory Lightweight Directory Services (AD LDS), AD DS, or Active Directory snapshot instance.

Specify the AD DS instance in one of the following ways:

Domain name values:

-- Fully qualified domain name
-- NetBIOS name

Directory server values:

-- Fully qualified directory server name
-- NetBIOS name
-- Fully qualified directory server name and port

The default value for this parameter is determined by one of the following methods in the order that they are listed:

-- By using the Server value from objects passed through the pipeline
-- By using the server information associated with the AD DS Windows PowerShell provider drive, when the cmdlet runs in that drive
-- By using the domain of the computer running Windows PowerShell

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-SitesIncluded<Hashtable>

Specifies the list of sites included in the site link. For Set-ADReplicationSiteLink operations, you can add or include new sites within an existing site link by specifying them using this parameter. You do not have to specify all previously listed sites already within this link.

エイリアス	なし
必須?	false
位置は?	named
既定値	なし
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Confirm

コマンドレットを実行する前に、ユーザーに確認を求めます。

必須?	false
位置は?	named
既定値	false
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-WhatIf

コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。

必須?	false
位置は?	named
既定値	false
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

• None or Microsoft.ActiveDirectory.Management.ADReplicationSiteLink

  A site link object is received by the Identity parameter.

  A site link object that was retrieved by using the Get-ADReplicationSiteLink cmdlet and then modified is received by the Instance parameter.

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

• None or Microsoft.ActiveDirectory.Management.ADReplicationSiteLink

例

Example 1: Add and remove sites from a replication site link

This command adds the site Asia2 to the replication site link Europe-Asia, and removes the site Asia.

PS C:\> Set-ADReplicationSiteLink -Identity "Europe-Asia" -SitesIncluded @{Add="Asia2";Remove="Asia"}

Example 2: Set a property on filtered sites

This command gets all the site links in the directory with replication frequency greater than or equal to 60 minutes, and then sets the Cost property on these site link objects to 200.

PS C:\> Get-ADReplicationSiteLink -Filter {ReplicationFrequencyInMinutes -ge 60} -Properties Cost | % {Set-ADReplicationSiteLink $_ -Cost 200}

Example 3: Set the daily replication schedule for a replication site link

This command sets the daily replication schedule of the site link with name NorthAmerica-SouthAmerica.

PS C:\> $Schedule = New-Object -TypeName System.DirectoryServices.ActiveDirectory.ActiveDirectorySchedule
PS C:\> $Schedule.ResetSchedule()
PS C:\> $Schedule.SetDailySchedule("Twenty","Zero","TwentyTwo","Thirty")
PS C:\> Set-ADReplicationSiteLink -Identity "NorthAmerica-SouthAmerica" -ReplicationSchedule $Schedule

Example 4: Enable change notification for a replication site link

This command enables change notification on the site link with the name Europe-Asia.

PS C:\> Set-ADReplicationSiteLink -Identity "Europe-Asia" -Replace @{'options'=1}

関連トピック

Get-ADReplicationSiteLink

New-ADReplicationSiteLink

Remove-ADReplicationSiteLink