Get-ADReplicationFailure
適用対象: Windows 8.1, Windows PowerShell 4.0, Windows Server 2012 R2
Get-ADReplicationFailure
Returns a collection of data describing an Active Directory replication failure.
構文
Parameter Set: Target
Get-ADReplicationFailure [-Target] <Object[]> [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Credential <PSCredential> ] [-EnumeratingServer <String> ] [-Filter <String> ] [ <CommonParameters>]
Parameter Set: Scope
Get-ADReplicationFailure [[-Target] <Object[]> ] [-Scope] <ADScopeType> {Domain | Forest | Server | Site} [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Credential <PSCredential> ] [-EnumeratingServer <String> ] [-Filter <String> ] [ <CommonParameters>]
詳細説明
The Get-ADReplicationFailure cmdlet returns all failures currently associated with a given domain controller or Active Directory Lightweight Directory Services (AD LDS) instance. The return object is of type ADReplicationFailure. This cmdlet returns the list of failures in the ADReplicationSummary object for a specific server.
パラメーター
-AuthType<ADAuthType>
Specifies the authentication method to use. このパラメーターに対して使用できる値:
-- Negotiate or 0
-- Basic or 1
The default authentication method is Negotiate.
A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
Microsoft.ActiveDirectory.Management.AuthType.Negotiate |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Credential<PSCredential>
Specifies a user account that has permission to perform this action. The default is the current user.
Type a user name, such as User01 or Domain01\User01, or enter a PSCredential object, such as one generated by the Get-Credential cmdlet. If you type a user name, you will be prompted for a password.
This parameter is not supported by any providers installed with Windows PowerShell.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-EnumeratingServer<String>
Specifies the Active Directory ドメイン サービス (AD DS) instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: Active Directory Lightweight Domain Services (AD LDS), AD DS, or Active Directory snapshot instance.
Specify the instance in one of the following ways:
Domain name values:
-- Fully qualified domain name
-- NetBIOS name
Directory server values:
-- Fully qualified directory server name
-- NetBIOS name
-- Fully qualified directory server name and port
The default value for this parameter is determined by one of the following methods in the order that they are listed:
-- By using the Server value from objects passed through the pipeline
-- By using the server information associated with the AD DS Windows PowerShell provider drive, when the cmdlet runs in that drive
-- By using the domain of the computer running Windows PowerShell
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Filter<String>
Specifies a filter in the provider's format or language. The value of this parameter qualifies the Path parameter. The syntax of the filter, including the use of wildcards, depends on the provider. Filters are more efficient than other parameters, because the provider applies them when retrieving the objects, rather than having Windows PowerShell filter the objects after they are retrieved.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Scope<ADScopeType>
Specifies the type of object used as input by the Target parameter. このパラメーターに対して使用できる値:
-- Server
-- Site
-- Domain
-- Forest
エイリアス |
ReplicationSite |
必須? |
true |
位置は? |
2 |
既定値 |
None |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Target<Object[]>
Specifies either one or more (using a comma separated list) of Active Directory domain controllers, sites, domains, or forests. It returns results for all the domain controllers that are specified or that are part of the specified container.
エイリアス |
Name,HostName,Site,Domain,Forest |
必須? |
true |
位置は? |
1 |
既定値 |
DCLocator; Provider: -Server of the connected drive |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
Microsoft.ActiveDirectory.Management.ADDirectoryServer
A class structure that contains one or more Active Directory server objects.
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
Microsoft.ActiveDirectory.Management.ADReplicationFailure
A class structure that represents Active Directory replication failure objects.
例
Example 1: Get replication failure data for a domain controller
This command gets a collection of data that describes an Active Directory replication failure for corp-DC01.
PS C:\> Get-ADReplicationFailure -Target corp-DC01
Example 2: Get replication failure data for a server
This command gets a collection of data that describes an Active Directory replication failure from corp-DC01.
PS C:\> Get-ADReplicationFailure -Target corp-DC01 -Scope Server
Example 3: Get replication failure data for multiple domain controllers
This command gets a collection of data describing an Active Directory replication failure from corp-DC01 and corp-DC02.
PS C:\> Get-ADReplicationFailure -Target corp-DC01,corp-DC02
Example 4: Get replication failure data for a site
This command gets a collection of data describing Active Directory replication failures from all the domain controllers in the site NorthAmerica.
PS C:\> Get-ADReplicationFailure -Target NorthAmerica -Scope Site
Example 5: Get replication failure data for all domain controllers in a domain
This command gets a collection of data describing Active Directory replication failures from all the domain controllers in the domain corp.contoso.com.
PS C:\> Get-ADReplicationFailure -Target "corp.contoso.com" -Scope Domain
Example 6: Get replication failure data for all domain controllers in a forest
This command gets a collection of data describing Active Directory replication failures from all the domain controllers in the forest corp.contoso.com.
PS C:\> Get-ADReplicationFailure -Target "corp.contoso.com" -Scope Forest