New-ADReplicationSiteLinkBridge

適用対象: Windows 8.1, Windows PowerShell 4.0, Windows Server 2012 R2

New-ADReplicationSiteLinkBridge

Creates a site link bridge in Active Directory for replication.

構文

Parameter Set: Identity
New-ADReplicationSiteLinkBridge [-Name] <String> [[-SiteLinksIncluded] <ADReplicationSiteLink[]> ] [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Credential <PSCredential> ] [-Description <String> ] [-Instance <ADReplicationSiteLinkBridge> ] [-InterSiteTransportProtocol <ADInterSiteTransportProtocolType> {IP | SMTP} ] [-OtherAttributes <Hashtable> ] [-PassThru] [-Server <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

詳細説明

The New-ADReplicationSiteLinkBridge cmdlet creates a site link bridge in Active Directory for use in replication. A site link bridge connects two or more site links and enables transitivity between site links. Each site link in a bridge must have a site in common with another site link in the bridge.

パラメーター

-AuthType<ADAuthType>

Specifies the authentication method to use. このパラメーターに対して使用できる値:

-- Negotiate or 0
-- Basic or 1

The default authentication method is Negotiate.

A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.

-Credential<PSCredential>

Specifies the user account credentials to use to perform this task. The default credentials are the credentials of the currently logged on user unless the cmdlet is run from an Active Directory module for Windows PowerShell provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the default.

To specify this parameter, you can type a user name, such as User1 or Domain01\User01 or you can specify a PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.

You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can then set the Credential parameter to the PSCredential object.

If the acting credentials do not have directory-level permission to perform the task, Active Directory module for Windows PowerShell returns a terminating error.

-Description<String>

Specifies a description of the object. This parameter sets the value of the Description property for the object. The Lightweight Directory Access Protocol (LDAP) display name (ldapDisplayName) for this property is description.

-Instance<ADReplicationSiteLinkBridge>

Specifies an instance of a site link bridge object to use as a template for a new site link bridge object.

You can use an instance of an existing site link bridge object as a template or you can construct a new site link bridge object by using the Windows PowerShell command line or by using a script.

Method 1: Use an existing site link bridge object as a template for a new object. To retrieve an instance of an existing Active Directory object, use the Get-ADReplicationSiteLinkBridge cmdlet. Then provide this object to the Instance parameter of the New-ADReplicationSiteLinkBridge cmdlet to create a new site link bridge object. You can override property values of the new object by setting the appropriate parameters.

Method 2: Create a new ADReplicationSiteLinkBridge and set the property values by using the Windows PowerShell command line interface. Then pass this object to the Instance parameter of the New-ADReplicationSiteLinkBridge cmdlet to create the new site link bridge object.

Note: Specified attributes are not validated, so attempting to set attributes that do not exist or cannot be set raises an error.

-InterSiteTransportProtocol<ADInterSiteTransportProtocolType>

Specifies the intersite transport protocol for this site link bridge. このパラメーターに対して使用できる値:

-- IP
-- SMTP

-Name<String>

Specifies the name of the replication site link bridge object.

-OtherAttributes<Hashtable>

Specifies object attribute values for attributes that are not represented by cmdlet parameters. You can set one or more parameters at the same time with this parameter. If an attribute takes more than one value, you can assign multiple values. To identify an attribute, specify the LDAP display name (ldapDisplayName) defined for it in the Active Directory schema.

To specify a single value for an attribute:

-OtherAttributes @{'AttributeLDAPDisplayName'=value}

To specify multiple values for an attribute:

-OtherAttributes @{'AttributeLDAPDisplayName'=value1,value2,...}

You can specify values for more than one attribute by using semicolons to separate attributes. The following syntax shows how to set values for multiple attributes:

-OtherAttributes @{'Attribute1LDAPDisplayName'=value; 'Attribute2LDAPDisplayName'=value1,value2;...}

-PassThru

作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。

-Server<String>

Specifies the Active Directory ドメイン サービス (AD DS) instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: Active Directory Lightweight Domain Services (AD LDS), AD DS, or Active Directory snapshot instance.

Specify the Active Directory ドメイン サービス instance in one of the following ways:

Domain name values:

-- FQDN
-- NetBIOS name

Directory server values:

-- Fully qualified directory server name
-- NetBIOS name
-- Fully qualified directory server name and port

The default value for this parameter is determined by one of the following methods in the order that they are listed:

-- By using the Server value from objects passed through the pipeline
-- By using the server information associated with the Active Directory ドメイン サービス Windows PowerShell provider drive, when the cmdlet runs in that drive
-- By using the domain of the computer running Windows PowerShell

-SiteLinksIncluded<ADReplicationSiteLink[]>

Specifies an array of site links that are included in this site link bridge. Accepted values for this parameter are the distinguished name, a GUID, or the name of a site link. This parameter must contain two sites upon creation or else the Instance parameter must be included and used.

-Confirm

コマンドレットを実行する前に、ユーザーに確認を求めます。

-WhatIf

コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

• None or Microsoft.ActiveDirectory.Management.ADReplicationSiteLinkBridge

  A site link bridge object that is a template for the new site link bridge object is received by the Instance parameter.

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

• None or Microsoft.ActiveDirectory.Management.ADReplicationSiteLinkBridge

注

• By default, all site links are bridged (transitive), and creating a site link design is not required. We recommend that you keep transitivity enabled by not changing this default. However, you must disable bridging for all site links and complete a site link bridge design if either of the following is true:

  -- Your IP network is not fully routed.
  -- You need to control the replication flow of the changes made in Active Directory Domain Services (AD DS).

例

Example 1: Create a site link bridge

This command creates a site link bridge named NorthAmerica-Asia that bridges the site links NorthAmerica-Europe and Europe-Asia.

PS C:\> New-ADReplicationSiteLinkBridge -Name "NorthAmerica-Asia" -SiteLinksIncluded "NorthAmerica-Europe","Europe-Asia"

Example 2: Create a site link bridge and set the intersite transport protocol

This command creates a site link bridge named NorthAmerica-Asia that bridges the site links NorthAmerica-Europe and Europe-Asia, and sets the InterSiteTransportProtocol on the new object.

PS C:\> New-ADReplicationSiteLinkBridge -Name "NorthAmerica-Asia" -SiteLinksIncluded "NorthAmerica-Europe","Europe-Asia" -InterSiteTransportProtocol IP

関連トピック

Get-ADReplicationSiteLinkBridge

Remove-ADReplicationSiteLinkBridge

Set-ADReplicationSiteLinkBridge